HT204053 How do I fix "unable to connect to icould server"?

How do I fix "unable to connect to icloud server" message on my laptop?

Hi there Danbase,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
-Griff W.

Similar Messages

I have a ipad mini and it says that it has perect wifi yet when i go into safari it says unable to connect with the server how can i fix this?

I have a ipad mini and i have had it for less then a year, it says that i have perfect wifi up in the left corner where the wifi is always at but when ever i go into the built in safari it says that it is unable to connect with the server. How can i fix this because with out it connecting to the server or internet it is kind of useless to me. I do have ios7 if that helps

The wifi symbol only indicates the presence/signal strength of wifi. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Downloaded Reader XI and started to recieve error 40000015, found the fourm with the patch to the registery fix, now it tells me unable to connect to the server. To many bugs with the reader, how do reinstall an older version?

downloaded Reader XI and started to recieve error 40000015, found the fourm with the patch to the registery fix, now it tells me unable to connect to the server. To many bugs with the reader, how do reinstall an older version?
I click on the launcher and nothing happens, 15 min later it will tell cant connect to the server.
My computer is a windows 8.1; 64 bit operating system. I am stationed in South Korea, but that should not affect the program. Help please.
John

Hi johnd83157268,
Sorry for the inconvenience that has caused to you.
Could you please let me know what changes have you made in the registry.
You might need to uninstall Adobe Reader from Control Panel and try install it again from the following link:
Adobe Reader Install for all versions
Please ensure that you are logged in as administrator and anti-virus is disabled as that might interrupt installation.
Try again and then let me know.
Regards,
Anubha

How can i fix my wifi connection with my router

how can i fix my wifi connection with my router?

I think I'm having a similar problem, my wifi disconnects when a bluetooth device is connected to the MBA.
I have a MacBook Air (13-inch, Mid 2012) with WiFi and Apple Trackpad. I'm unable to use the trackpad(bluetooth) and wifi at the same time. If I turn off the trackpad then the wifi works fine and if I shutoff the wifi then the trackpad works fine. This configuration was working fine prior to upgrading to Yosemite.
I experienced the same problem at home and at the office.
Additional test:
I turned off the bluetooth trackpad and connected my bluetooth headphones to the MBA. The wifi disconnected as soon as I paired the headphones with the MBA.
I have had no problems with the MBA's keyboard or integrated trackpad.
Rick

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

How do I fix error cannot connect to Itunes store, How do I fix error cannot connect to Itunes store

How do I fix error cannot connect to Itunes store, How do I fix error cannot

Refer to this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368

HT204053 I keep getting a message to accept the terms and conditions of icloud and when I click on it it tells me the "unable to connect to the server."

I updated to ios 7 and keep getting a message to accept the terms and conditions of icloud and when I try to do this, I get the message "unable to connect to the server". This message pops up quite frequently.

GB
Message was edited by: gail from maine

Can't log in to Lion Server. Open Directory Log Message says: unable to connect to password server

I am setting up Lion Server. I can't log in to Lion Server from client.
Checking the Open Directory Log: says: "unable to connect to password server" or
"3394.14268, Node: /LDAPv3/127.0.0.1, Module: AppleODClient - unable to read Password Server response - connection to Password Server was closed, socket fd 18 (5205)"
Thanks for help with this.

I never discovered the problem, and instead rebuilt the server from the ground up. I followed instructions at this discussion thread. Very helpful.
How To Install A (Almost) Working Lion Server With Profile Management/SSL/OD/Mail/iCal/Address Book/VNC/Web/etc.
I have had some log-in problems with users. I have found that restarting the server helps. If this doesn't work, I rebuild permissions on the server, followed by opening up Workgroup Manager, go to the user's password, click on options and require that the user change password on the next log-in. For some reason, this will usually fix the problem. I then log in as the user, and "change" the password to the original one. Also note, that if you import a user, the password is not brought in. You must enter it for each user that you imported. Even so, I have often had to resort to the re-set password procedure to enable a log-in.

"Unable to connect to secure server." Why?

Safari previously operating OK under OS 10.3.9 suddenly starts reporting "Unable to connect to secure server" with a number of (maybe all?) <https://> sites. Explorer doesn't exhibit this problem. Removing Safari .plist, clearing caches, and removing ~/Library/Safari folder do not help.
Any ideas on what to try next?
Thanks,
Steve.

I am running OS X 10.3.9 as well. I normally use Firefox as my browser, it runs fine. However all my software updates use Safari as their browser, so I have stopped getting all security updates. Also, I've been unable to access the iTunes Music Store, and Photoshop Elements hasn't worked in a while (I assume they use Safari to connect to the internet).
Does anyone know of a fix. Or how do I simply get Software Updates, iTunes, and Photoshop to start connecting through Firefox?
Can anyone help? Thanks.
Dual 1.25 GHz Power PC G4 Mac OS X (10.3.9)

[Solved] Samba log spam: Unable to connect to CUPS server

Hi everyone,
I'm running into an annoying issue with samba. I don't have any printers installed, and probably won't. However smbd complains to no end in /var/log/errors.log about not being able to connect to a cups server:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: Samba name server ASAKURA is now a local master browser for workgroup MYGROUP on subnet 192.168.1.121
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:32:22 asakura smbd[4552]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4552]: Unable to connect to CUPS server localhost:631 - Connection refused
Apr 18 12:32:22 asakura smbd[4553]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4553]: Unable to connect to CUPS server localhost:631 - Connection refused
Those last two lines get spammed constantly.
I've done a little bit of research into the matter, and followed the steps here to try to resolve the problem: http://www.davekb.com/browse_computer_t … server:txt
Unfortunately it doesn't appear to make any difference.
Here is my /etc/samba/smb.conf:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = no
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
; [homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
; [printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[shared]
path = /media/shared
valid users = foosoft
public = no
writable = yes
[tomato]
path = /media/data1/tomato
valid users = foosoft
public = no
writable = yes
show add printer wizard = no
printing = none
printcap name = /dev/null
disable spoolss = yes
I'm totally out of ideas here, anyone have a tip on what I could try next?
Last edited by FooSoft (2009-04-18 19:52:28)

glad you posted it first i had the same problem.
However, samba was complaining that
printing = none
was invalid. I removed that line and it works great.
thanks
Last edited by lio (2009-10-16 00:20:14)

I am wanting to update iphone to 4.3.3, however I am connected to the internet, yet itunes is telling me it is unable to connect to update server because i am not connected to the internet... please help

I am wanting to update iphone to 4.3.3 software. however itunes is telling me it is unable to connect to update server as i am not connect to the internet. yet i clearly am connected... Please help

Looks like I've asked a really old/common question - toonz posted the answer - I've copied it below. Thanks toonz, everything now ok.
Correct AnswerRe: Updating to 1.1.3                                                                        02-Feb-2008 23:19                                                    (in response to alibeau)
                        You can fix this by following the steps in this article:
http://docs.info.apple.com/article.html?artnum=304468
             Liked         (1)

HP OfficeJet Pro 8500A Plus "unable to connect to the server"

I have had this printer for a couple years and now it is saying it is unable to connect to the server. The light under the wifi symbol is not lit up and nothing happens when I press that button.
I have restarted the printer, reinstalled the driver, restarted the router ... to no avail.
The router is working properly as my 2 computers are both working.

Hi bhappie,
Welcome to the HP Support forums. I gather that you are unable to connect your Officejet 8500A plus printer to your wireless network.
This printer can be connected by an ethernet cable or connected to your wireless network but cannot support both simultaneously as referenced in the document The Printer Does Not Support Ethernet (Wired) and Wireless Network Connections at the Same Time. To setup the wireless feature you will need to unplug the ethernet cable.
Your wireless printer can be easily connected to your wireless network from the front panel of your printer. If you are unsure how to do this the instructions can be found in your User Guide on page 219 in the section titled “To set up a wireless communication using the Wireless Setup Wizard”.
Now that the printer has a wireless connection, any computer that uses the printer, will need to have the connection method updated. The instructions on how to do this can also be found in your User Guide on page 221 in the section titled “Change the connection method”. There is a sub-section dedicated to Windows operating systems and one dedicated to Mac operating systems.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

E71- unable to connect IMAP outgoing server

HI,
After I re-installed software in my E71 I have faced problem that I unable to connect IMAP outgoing server it was earlier fine Even Incoming mails are no problem currently.
please fix this issue
regards
nizar
MODERATOR'S NOTE:
We would like to inform you that we have edited your post and your personal details (e.g. full name, mobile number, email address) was removed as it is unwise to publish personal details on forums like this.
We kindly ask you not to share personal information on this forum.

not enough to go on.
what country are you in?
what carrier do you use?
what do you currently have for your outbound server and port?

Unable to connect to the server.. Error Data : API_NOT_INITIALIZED on CUEAC Server Installation

Hi all,
I am trying to install CUEAC Attendant Server on Windows Server 2008 R2, tried several times. First, it got stuck on the Databahse Wizard. After three reinstalls, it still got stuck but somehow built the configure database named CFGATT and then started installing TSP. Finally, the setup has been finished and I went to the WebAdmin page. After I entered the login information, it gave an error : "
Unable to connect to the server.. Error Data : API_NOT_INITIALIZED"
I searched through the forum and found this topic :
https://supportforums.cisco.com/message/1215763
Here I found that there's a bug and I tried to do the fix myself as instructed :
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte44454
However, it changed nothing, looking forward to your responses.
Regards,
Fikri

Fikri,
It is not working as this is not a supported environment, the current release is not supported on Windows Server 2008 R2.
The next release (April 2013) will support that version of Windows Server.

I am unable to connect to Essbase Server 11.1.1.3

Hi
Can anyone help me to solve this Essbase server Error. I am unable to connect to Essbase Server 11.1.1.3
2010-05-10 11:35:49,359 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2010-05-10 11:35:49,515 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2010-05-10 11:35:49,515 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2010-05-10 11:35:49,515 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2010-05-10 11:35:49,734 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2010-05-10 11:36:01,609 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2010-05-10 11:36:04,625 INFO [main] Got hub location from Registry:http://D26085.arrownao.corp.arrow.com:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2010-05-10 11:36:05,312 INFO [main] Got native directory location from Registry:D26085.arrownao.corp.arrow.com:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2010-05-10 11:36:05,312 INFO [main] URL constructed out of values in Registry database:ldap://D26085.arrownao.corp.arrow.com:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2010-05-10 11:36:08,734 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:09,718 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:09,718 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:09,718 WARN [main] Native Directory is not reachable. Attempting to re-connect... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:09,718 WARN [main] Number Format Exception converting nullto int; Returning default value 10[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
2010-05-10 11:36:09,718 WARN [main] Number Format Exception converting nullto int; Returning default value 3[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
2010-05-10 11:36:11,750 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:12,750 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:12,781 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:12,781 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:15,781 WARN [main] Attempting to connect to Native Directory: Retry Count: 1 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:17,781 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:18,890 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:18,890 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:18,890 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:21,890 WARN [main] Attempting to connect to Native Directory: Retry Count: 2 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:23,812 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:24,921 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:24,921 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:24,921 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:28,046 WARN [main] Attempting to connect to Native Directory: Retry Count: 3 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:30,046 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:31,062 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:31,062 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:31,062 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:34,062 WARN [main] Attempting to connect to Native Directory: Retry Count: 4 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:36,078 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:37,093 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:37,093 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:37,093 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:40,093 WARN [main] Attempting to connect to Native Directory: Retry Count: 5 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:41,921 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:42,921 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:42,921 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:42,921 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:45,921 WARN [main] Attempting to connect to Native Directory: Retry Count: 6 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:47,953 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:32:48,375 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2010-05-10 12:32:48,531 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2010-05-10 12:32:48,531 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2010-05-10 12:32:48,531 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2010-05-10 12:32:48,796 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2010-05-10 12:33:00,984 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2010-05-10 12:33:03,453 INFO [main] Got hub location from Registry:http://D26085.arrownao.corp.arrow.com:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2010-05-10 12:33:05,312 INFO [main] Got native directory location from Registry:D26085.arrownao.corp.arrow.com:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2010-05-10 12:33:05,312 INFO [main] URL constructed out of values in Registry database:ldap://D26085.arrownao.corp.arrow.com:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2010-05-10 12:33:09,265 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:10,234 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:10,234 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:10,234 WARN [main] Native Directory is not reachable. Attempting to re-connect... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:10,234 WARN [main] Number Format Exception converting nullto int; Returning default value 10[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
2010-05-10 12:33:10,234 WARN [main] Number Format Exception converting nullto int; Returning default value 3[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
2010-05-10 12:33:12,265 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:13,250 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:13,250 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:13,250 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:16,359 WARN [main] Attempting to connect to Native Directory: Retry Count: 1 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:18,375 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:19,390 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:19,390 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:19,390 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:22,390 WARN [main] Attempting to connect to Native Directory: Retry Count: 2 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:24,437 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:25,421 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:25,421 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:25,421 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:28,421 WARN [main] Attempting to connect to Native Directory: Retry Count: 3 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:30,453 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:31,453 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:31,453 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:31,453 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:34,453 WARN [main] Attempting to connect to Native Directory: Retry Count: 4 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:36,390 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:37,390 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:37,390 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:37,390 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:40,390 WARN [main] Attempting to connect to Native Directory: Retry Count: 5 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:42,328 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:43,328 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:43,328 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:43,328 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:46,328 WARN [main] Attempting to connect to Native Directory: Retry Count: 6 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)

Hi
I am to login to Hyperion Shared Services console. Share service for Essbase is running properly. When I attempt login into Essbase Studio Login, following error message appears
Network communication with the server failed
Connection refused: connect
=========================================================================
Also,the below Error messages are found in Oracle EPM System Diagnostic Reports
Validation tool info: 11.1.1.3.0 drop 9-0 build 3129 on 07/16/2009 01:24 PM
OS name: Windows XP
OS version: 5.1
Essbase Server startup check using Maxl command
Error: Result: Unable to connect Essbase Server using MAXL command. Please check that essbase server is running.
Recommended Action: Check Essbase Server is started.
EssabaseServerChecker
Error: Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials
Recommended Action: Check application is started.
SVR: Essbase Java API
Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** d26085.arrownao.corp.arrow.com http://d26085.arrownao.corp.arrow.com:13080/aps/JAPI
Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at d26085.arrownao.corp.arrow.com. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
Recommended Action: Make sure external checker is working.
ESS: Essbase Studio Server
Connecting to Essbase Studio Server...
Error: Network communication with the server failed
Recommended Action: Check application is started.
SVR: Essbase Java API
Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** d26085.arrownao.corp.arrow.com http://d26085.arrownao.corp.arrow.com:13080/aps/JAPI
Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at d26085.arrownao.corp.arrow.com. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
Recommended Action: Make sure external checker is working.
Please advice how to slove this Essbase issue.

HT204053 How do I fix "unable to connect to icould server"?

Similar Messages

Maybe you are looking for