HT204053 I am trying to log into my IPad using my apple ID and password to download updates, which I have done before, but it brings up my daughters ID instead of mine? What do I do to get it to bring up my apple ID.
I am trying to log into my IPad using my apple ID and password to download updates, which I have done before, but it brings up my daughters ID instead of mine? What do I do to get it to bring up my apple ID.
Could it be that you or your daughter used your daughters Apple ID to install these apps? Make sure that your Apple ID is set up in "Settings > iTunes & App Stores" then delete the Apps when your daughters ID appears and then re-download them again by using your own Apple ID. This should fix the problem.
Similar Messages
-
I can't access iCloud, i keep getting a message to try again later. This is the first time i have tried to log into icloud. I know my account is working, i want to access it from my macbook. I think its looking for my old icloud email, what to do? I have a working apple id, i dont understand, could it be linked to an old account iD?
Hi smccarrison,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful with troubleshooting signing into iCloud:
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
All the best,
Jeremy -
HI, guys!
i update my iphone 5s to ios8, but my Personal hotspot is missing from my iphone! What i can do, to get it back?Click here and follow the instructions at the bottom of the article.
(113895) -
I purchased and downloaded an episode of a television show onto my MacBook pro, as I have done before, but this time it only plays without audio. What gives?
Okay, so the download is possibly corrupt. Did you try downloading again?
Also, you'll likely get more appropriate responses posting to the iTunes for MAC forum instead of the iTunes for Windows forum where this currently is. -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
Last year my daughter received an iPod for her birthday. I sat it up using my Apple ID and password that I use with my iPhone. For Christmas she got an iPad mini and it was sat up this time with her own Apple ID and password. Just wondering if there is any way to transfer or sync the apps and music that she has on her iPod to her iPad even though they have different apple IDs and passwords?
Welcome to the Apple community LSeaward.
Unfortunately, you can't transfer content from one ID to another. -
ive tried to delete the instagram app multiple times and it still wont let me log in. also, i have had my friends log into my account, and they are able to log into my account. i have heard of other people that are also having the same problem.
Hi Wendy
I to had the same problem when my account was disabled after my fiancé used my phone.
As I was being advised to contact apple support, being new to even itunes on my own account i checked in with them, and every thing I was being advised to do still disabled.
I was obsessing over this and was trawlling through guides etc just incase I had missed something.
As it turns out I had but no one had suggested it!
The morning I was going to go and let my frustration out on a member of the apple store I had one last look. Went into the account settings and realised my name was right address right account details were not. I changed these and now my app store has become my obsession. I could finally feel the same way about my iPhone as my friends did and still do about theirs.
Sorry it was long winded but I truely was getting annoyed and out played by my iPhone.
I do hope this helps you and your daughter. -
Help me please!?!
See if you can wipe/erase his device. make sure you select his device and not your device to erase.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud. -
I am trying to activate Photo Stream in the ICloud Settings. It says I need to update IPhoto, which I have done (9.4.2 update), which I have done. It still won't accept me checking it. What am I missing? Just trying to get current with Photo Strream capabilities.
No idea unless you tell us what you have done
Basically you log into iCloud in the system preferences and then turn on PhotoStream in the iPhoto preferences - the FAQs, instructions and trouble shooting hints are here -- http://www.apple.com/support/icloud/
LN -
i am having trouble using apps with my apple id and password? it is saying it is not correct but the one I used is how I got to this site and activated my phone? Why is it not letting me log on to apps with ID and password?
Have you tried signing out and then back in?
-
I cloud will not accept my apple id and password on my laptop. I have changed the password twice trying to make it work. What to do now?
IF your imessage is saying waiting for activation then do this:
backup your phone to itunes or icloud.
then on your phone go to settings - general - reset - erase all contents and settings - this will wipe your phone clean.
once the process is done, you can restore from the backup you made, then you should be able to activate your imessage. -
I forgot my apple id and password and cannot get through reactivation. please help. thanks.
I forgot what my Apple ID and password is. Now that I have to reactivate my iPad mini, I cannot get through. I tried finding my Apple ID by searching through name and other information but it is not showing anything. Please help. Thanks.
Hello HarveyWalt,
Thanks for using Apple Support Communities.
Please see the article below for searching for your Apple ID.
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
Take care,
Alex H. -
What to do when trying to log into my iCloud and it says "this apple iD is valid, but it's not an iCloud account"?
If you have not already created an iCloud account elsewhere you cannot do so on PC, and that is the error message you will get. You can create an iCloud account on a Mac or an iOS device and then you should be able to sign into it in the iCloud Control Panel in Windows.
-
I have a MacBook Pro and OS10.6 and am trying to log into a site that requires me to enter a code from a picture ... problem is all I get on the screen is a white '?' in a blue box. What do I need to display the picture?
Reload the page. If it doesn't load, choose Activity from Safari's Window menu, find that picture in the list, and see what it says to the right; this may reveal what the problem is.
(91827) -
i am trying to log into facetime through my Macbook Pro and it shows me this message "the server encountered an error processing registration please try again later". what does this mean and what should i do? also on my iphone 5 i am trying to log in with my apple ID but everytime i try it sayd incorrect password! please help!!
Wait until Apple fix it. See: http://www.apple.com/support/icloud/systemstatus/
Maybe you are looking for
-
we are on release 11.5.10.2 and we are trying to terminate an employee back dated to 28-feb-2011 and we are getting following error when terminating this employee: APP-PAY-07957: The actual termination date must note be before any future changes to t
-
Can I change the arrow direction in the slider
I am using system slider on the front panel. The default arrow point to the left side. Can I change it to point to right side. Thanks,
-
Java.lang.NoSuchMethodError implementing stateless session bean
Hello all, I am running Weblogic 5.1 on Windows 2000 using the JDK 1.2.2 and the J2SDKEE 1.2.1. I have created and successful deployed a state session bean as provided by the example given at this url: http://www.weblogic.com/docs51/examples/ejb/basi
-
Adobe Flash player crashes constantly
Adobe Flash player crashes in all browsers. I have tried disabling hardware acceleration, expanding memory storage, downloading older versions etc, etc. I have tried IE10, Firefox 17, Chrome, Avant, and Safari, all with the same issues. I am running
-
Labview freezes when opening a modified file
Hello, I'm somewhat new to Labview, and yesterday encountered a strange problem. While working on a friend's computer (version 8.2.1), I opened one of their files, re-saved the file with a new name, made some changes, and it seemed to run just fine.