HT204053 I have multiple apple devices, 2x phones ipad etc, but all are through the same email and I only get the storage space for one device, what should I do?
I have multiple devices all under the same id and email but I don't get multiple icloud storage space and it's running out!
Can anyone help as I've just bought an iphone for my daughter and would like to link it as well.
Thanks in anticipation of your help.
One icloud account gets a 5 GB of storage, regardless of the number of devices connecting to it. But you're in luck, you can buy more storage for the account if you are running low.
As for your daughter, be sure to get her own icloud account, otherwise she'll end up getting all your email, contacts, etc. And if she deletes any of this data, it will be deleted on your devices as well. Note: you can all keep using the same ID for the itunes store for sharing purchased items.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/
Similar Messages
-
Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???
Tried to reset network settings ...only fixes it for 15min. Did a firmware restore and a clean new phone setup. no settings restore. still have network service after around 60min. still running 6.1. i do get a prompt that i have to update settings to LTE. Have not excepted the settings as yet. Cellular data is still set to 3G....
-
I have used the same Apple ID on my children's iPads. Both iPads are now showing as the same. How do I get the missing account back?
You can clear the iPad and start again with the other account> Settings->General->Reset->Erase all Content & Settings
Or you can go to Settings->Itunes and App Stores->Apple ID->Sign Out,
And Then Sign in with the other account. You can then download the Apps with that account. Though you may block the other account for 90 days.
Your best bet is to set it up again using the orighinal account it had, so you can get their Apps back. without affecting your account. -
I dont know my apple id password or security questions and I dont have access to the linked email, how do i get the password?
Call Apple Support, ask to speak with Account Security, and see if they can help.
Regards. -
This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach. -
I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase. I push redeem again and it has the same message and I cant download the movie. What can I do?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
My iPhone 5 is not restoring because it is locked with a passcode , it's the same computer and I m entering the password and it's not working the phone is not responding
http://support.apple.com/kb/HT1212
-
When I turn on my iMac it comes up with the login icons which I then choose and log into. The password works and I then get the apple icon and the spinning wheel. After about a minute the Apple icon turns into a prohibited icon. However, if I log in under the guest icon, I can access the wifi and get to Safari. I really don't know what to do next. Any help would be gratefully appreciated.
Are you running any A-V? If it's an iMac 21.5, I don't think you're running Leopard, 10.5. Probably at least Snow Leopard, 10.6. This is the Leopard forum.
This article says meant for 10.3.9 and eariler, but contains some still useful suggestions.
http://support.apple.com/kb/TS1411
Try a Safe Boot. Shift at the startup chime and expect a much longer time to boot. This will bring you to a login screen with "Safe Boot" in red.
Look at this as well.
http://support.apple.com/kb/TS1417 -
I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it? It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device." I dismiss the message, but the remote no longer works with it and the music is too quite to the speakers. The remote works fine with my Macbook Pro. I tried a restore on the iPhone and started from scrach, but the same problem exists.
Any help with this?
Thanks,
JTyep... my iphone 4 also having problem like astoker.. u see on dock pin using torch light.. i found 2 pin touch each other.. i solve my problem ready.. thanks wjosten.
-
I created an iTunes account and finished by having a verification email sent out. I never got the email and when I get the note to resend it it won't let me tap on it and below it says, email address is already verified for another Apple ID
Apple requires each Apple ID be associated with a different email address. Perhaps that is why you haven't received the email. Or you received the email and it is in your Junk Mail folder.
-
HT204053 I have multiple apple id's - how do I find them all?
I have multiple apple ids. I can not remember the security questions any more and now I can not access my email using my old email address. I now get a "Your account has been locked" message - very annoying!
To find all your AppleIDs log into
My Apple ID https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
There use the link Find your Apple ID in the lower right of the window.
On the same page you can use the "Reset your Password" link to manage your Apple ID and require that your security questions will be reset. You will receive an email notification with instructions how to proceed.
Regards
Léonie -
I have multiple apple I'd and default I'd comes up. I want to change with new I'd. How can I do that?
iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311 -
My wife and I's iphone 4s' are both on the same computer. When we did the new upgrade to ios6 it started sending text messages to both of us from each other. For example I sent my wife a text "Hey" and then my phone received a message from Me "Hey." Another example is that a friend sent my wife a text and both of us received it from that friend, but not in a group message. We both deleted our icloud account and the problem still happened. Then we checked that we were both signed in to our own personal accounts for imessage and we were. After turning off imessage the problem went away. Any ideas on how to make imessage work without having it send messages to both of us?
I also have the same problem and changed the send & receive addresses . But it always seems to revert back to 2 addresses/numbers on the second , my wifes phone . Which isn't the best .
-
Can i use the same email and I.D for 3 devices
I have just purchased an I Phone 4, but already have an IPod and and an I Phone 4.
Can i use the same email address and password for all 3 devices once i have registered the new Iphone?Yes.
-
as stated in the title, im experiencing the BSOD, have tried all possible solutions and its poihnting to the logic board being duff. did they extend the warranty on the 13" 2010 MBP's??
Bad Idea. You see, you are basing your decision on a flawed concept: that a desktop is the same as a portable. While the iMac does use some miniaturization concepts in order to stuff everything into a single box, in no way does it approach the degree it is done in any portable, much less in a 1" thick 13" MBP. Then add the added risk factors involved in something that goes to and fro all over the place, and you will have to agree that a portable's life is much more prone to danger.
But what's done is done and this can now only be a learning experience for the next purchase. Only glimmer of hope is that Apple recently lost a court ruling in the EU and is now mandated to honor the standard 2-year base warranty for electronic goods you all have over there; use that either as a negotiating tool to get it fixed outright or to see if you can still purchase the AppleCare extension. After all, AppleCare states that you need to purchase it while the base warranty is still in effect.
Good luck.
Maybe you are looking for
-
I implemented a while ago a H.264 re-encoding to output H.264 QuickTime .mov file usng QuickTime Window SDK 7.3.0.70. The code uses ICMCompressionSession to compress the frames going into the container. The code works fine with cameras with resoluti
-
I Phone Freezes with Mailbox and CD Logo-Help Please
My Iphone freezes with a Mailbox logo with an arrow pointing to an I-tunes CD logo. It will not allow me to re-set. It does allow me to turn on and off, but this same mailbox logo with an arrow pointing upward to the i-tunes logo is constant. I have
-
Bringing a JFrame to the front?
i have already searched the forum, but i think i might not be using the right words.... anyways, i have a JFrame that is launched when a button is clicked on another JFrame. Initially it is created, which brings it to the front. However, for subseque
-
How to sum row level multiplication values between two measure?
Hi All , In the CUBE i want to create a calculation , which in SQL Server is = sum(calldur*callind). The calldur is a measure which has numeric values. Callind has values of 1 and 0 (factless fact ). please see the below datasets. calldur callind sum
-
How do I switch the start and end point of a line?