HT204053 iMessage on my computer, and receiving the same messages on your iPhone how do I do it?
iMessage on my computer, and receiving the same messages on your iPhone how do I do it?
http://support.apple.com/kb/TS1538
Going to venture a guess your Apple Mobile Device service isn't started.
Similar Messages
-
I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation. -
Please can someone explain how to configure my messages to delete from my Samsung laptop, and at the same time have them disappear from my Samsung Galaxy Tab 2 and my Samsung Galaxy 111 Phone. I am using Windows 7 64 Bit and can't keep up with the huge amount of emails I get on a daily basis. I know that I need imap instead of pop3 but there has to be an easier way to solve this. Thank you.
''I know that I need imap instead of pop3''
That's the solution.
''but there has to be an easier way to solve this.''
I don't think so. -
When I send a message to the ipad, from my iphone, I get the same message to my phone from my own number. He also gets one to his iphone when he sends me a message from his ipad. I know this has something to do with the apple id; we do use the same one. Is there a way to turn off the multiple messages? We don't want to get separate apple ids because the guy at the apple store told us we wouldn't be able to share the music we have....meaning music on my id wouldn't show up with the music on his id in our itunes. So we switched to using one account. Is there a way to fix this problem without having to create a separate apple id?
Apple ID cannot be merged or transfered.
Read this tips
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family -
When attempting to download the latest version of iTunes I receive a message that there is no installation package found (iTunes.msi). Searching my computer, I cannot locate a file with the msi designation. Tried to use the .exe file unsuccessfully. I am unable to remove the current version for the same reason. I have a large library of music that I cannot download on my iPhone4 for the same reason.
Any suggestions would be greatly appreciated!!(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
have an iphod touch in recovery mode and hooked into the computer to restore it, because the kids forgot password and locked it up.now say software server cannot be contacted what do i do now?
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.bump, I have same issue. thanks, MM
-
After downloading IOS5, i can't access my itune and receive the following message "The Folder "Itune" is on locked disk or you do not have write permissions for this folder", noting that i access this folder in a normal way. Any clue ?
In my case its a new computer the old one was stolen and the time machine disk did not work for a restore but did for copying the info to the new mac
-
How to send IP Addr in an alert and receive the same?
1. I have an 'alert handler' process that's sending an alert using 'Create Alert' activity.
2. I have a listening/receiving process that get's triggered by this alert from the 'alert handler' process.
3. The listening/receving process telnet's to a router. I want the listening/receiving process to extract the IP Address of the router from the alert that triggered this listening proecess.
4. I tried sending the IP address of the router as 'Parameter 1' using the 'Create Alert' activity in the 'alert handler' process.
5. In the receiving process, in order to telnet to the router, I chose 'Execute on this target reference' option for the 'Open Terminal' acitivity, but was unable to access 'Paramter 1' of the alert. It shows greyed out.
Question:
What is the best way to send the IP address of the router in the alert and receive the same in the listening process such that I can telnet to that router in the listening process?
Please note: tried creating a 'terminal target'...there is no way for me to supply IP address info from outside into terminal target...looks like terminal target only takes a hard coded IP address or host name.
Will appreciate your prompt response please.
thanks,
JamalWe discussed this, but just to post here. To view alert or other tasks parameters via the reference variable fields you have to select the show advanced checkbox.
-
I have 2 iphones syncing on one computer and on the same apple ID.
Before i updatad my Itunes to the last available update and my Iphones to 5.01
i had no problem draging jpg. and mp3 files into my iphones DCIM folder (the picture folder that opens
when conecting to Itunes). Since my updates Itune wont let me drag and drop any files' even pictures that
were taken with my Iphone on 4.3.3.
Please help as we have no itunes music in Israel, only apps and i cant copy any of my old music from my computer
to my iphones.
If it helps, i am using a pc with 32 bit windows 7.
Other from the obove Itunes works fine and does sync pictures from my computer to my Iphone from "my pictures" folder.
Thank you for your time
Yoni Bliss
[email protected]The title of my initial post is a bit misleading. I already took a chance deleting one of the iPhones, hoping if I deleted the wrong one, I can still reauthorize it (all with the same Apple ID acct, so not subject to 90-day waiting period, right?) The iTunes database just updated itself, and it says I have 4 "devices" "in the Cloud", but 5 "computers" associated w my account. How can I find out what computers are associated? Isn't there a list I can see? I dont have a clue what computers they might be. If I use the "Deauthorize All" option, is it a pain to add them all back in. I assume I would have to log in from each computer to reauthorize each one. Would I have to be running the newest OS or version of iTunes to reauthorize? I think I have a PowerBook G4 Titanium with an older OS and iTunes. I'd like to keep that authorized, if possible.
-
I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.
In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....
-
download failed due to internet problems. I can't restart the download again and receive the following message: The product distribution file could not be verified. It may be damaged or was not signed. please help thanks
I went to Purchases and it worked from there having had the same problem you describe.
-
I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?
I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need. -
I m trying to download an application and receive the following message: "your request cannot be completed". What can b the problem???
Your payment method may be failing. The app may be in a transitional state (not currently available for purchase).
-
I tried updating my Photoshop CS6 via the cloud and received the following message...Update failed Errors encountered during installation.(U44M1P7). What does that mean
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Maybe you are looking for
-
So even when I load up websites (like ones we here at my job have created) with very simple HTML and absolutely nothing Flash related, I still get a pop-up asking me to install flash (pops down from the URL bar at left.) How can I stop this without d
-
Hi, I am working on jasper report1.2.5. I created jrml file using iReport Tool (1.2.5). while I am tyring to compile this jrxml file into solaris I found the following error. java.lang.NoClassDefFoundError: org/eclipse/jdt/internal/compiler/env/IName
-
Working with oracle object type tables
Hi, I've created a table which only contains Oracle object types (e.g. CREATE TABLE x OF <...>). When I create an Entity for this table using the Entity wizard, I end up with an entity with the attributes of the base object type and two special attri
-
Can form 6i run in Apps 11.0.3
I define my form 6i under System Administration-> Application -> Function with Type='WWW' and HTML call = 6i form url on the web I want the user to login through the R11 Application and run the form 6i on the web by selecting the function as defined.
-
How to automate User creation using SCAT ?
Hi, Can any body help me out in generating a script for automating User creation by SCAT ? I recorded the steps,but failed to upload the values from the excel sheet to SAP.How to enter the values in the excel sheet - Is it row-wise or columnwise ? Th