HT204053 In my settings on iPhone, iCloud is there but I can't select it to set it up. Can anyone help me with this?
Can anyone help with the above?
This probably would've helped but it seems to be much easier said than done! It's asking me for a restrictions passcode which I DEFINITELY haven't set up seeing as I only bought my phone brand new this week! Heeellppp!
Similar Messages
-
I am not able to Mobile Me email account to connect with iCloud or my Apple Mail program. Don't know if my settings are correct or not. Can anyone help me with this please?
http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards. -
hi i cannot download ios 6.1.2 on iphone 5 , i tried to reset the setting and restart it but just cannot download. can anyone help me with this ?
First, plugged into a wall power socket.
You go to
Settings > General > Software Update
to update the new IOS 6.1.2 -
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?
Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on. -
I can't turn on my iphone, can anyone help me with this?
I can't turn on my iphone for some reason, can anyone help me with this?
1. Charge with the AC adaptor for at least 30 minutes.
2. Reset phone - press both home and sleep/wake buttons until the Apple logo appears (10-15 seconds).
If no response at all to the above, there is a hardware failure. -
The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?
greeneygreeney wrote:
so you can't ever restore it to the factory settings? that is a big shame.
"It will ALWAYS restore to the lates available software.
You cannot downgrade." -
i have an iphone 3gs and everytime i try to restore it on itunes it just keeps saying an unknown erroe has occured (29) can anyone help me with this??
Hello Laura,
Thank you for posting in the Apple Support Communities. I found an article that has information about Error 29:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Best,
Sheila M. -
HT2311 My registry settings fot importing & burning to cd are missing can anyone help me on this
My registry settings fot importing & burning to cd are missing can anyone help me on this
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Since I updated to ios 7 and all other updates my pictures have all gone from icloud? Can anyone help?
I'm not sure how that changed, but I am so grateful for your knowledge!!! thank you, thank you, thank you!!!!!!!
-
I am no longer able to iTunes wi-fi sync since I upgraded to the iPhone 5. When trying to connect, it stays in the discovery mode and never connects.I have to try and pair them all over again. Then I get a message saying that my Mac Book Pro is not supported. Can anyone assist me in resolving this issue. It is an early Mac Book Pro 10 I believe. I purchased it in February of 2010.
I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it. -
Everytime I connect my Iphone to my computer, it syncs, then soon after disconnects, then reconnects, and so on....Does anyone know why it's doing this? It makes it hard to back things up and charge it. I checked and my iTunes and iPhone software are updated and my computer is only 6 months old....help please!
Reasons for Drive Failure
Hard drives are mechanical devices with moving parts, so they are subject to expected wear and tear, and can potentially fail mechanically at any given time. But most manufacturers will label their product with an expected average lifespan (usually provided in total expected number of functioning hours). But if a part is faulty or there are some manufacturing defects, a drive's lifespan can be over in as little as a day. Other factors are primarily external in nature. Power surges can cause drive failure, as can fire or water damage, along with a number of computer viruses. Exposure to high levels of magnetism can disrupt the normal functions of a drive, along with sharp impacts. If dust gets into a drive, it can become the catalyst for an eventual failure.
You could try to boot with this. It will test your HD!
I would say your HD is toast!http://www.seagate.com/support/internal-hard-drives/consumer-electronics/ld25-series/seatools-dos-ma...
Read more: http://www.ehow.com/about_5087073_causes-hard-drive-fail.html#ixzz2aOMvlQ8w
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
I recently changed my email address and have changed my Apple ID to reflect that. My itunes account will work on my PC with that new ID but my iCloud will not. Also, my iPhone will not use my new email address for either itunes or icloud. I don't know how to change it.
I read that if, on your iPhone you delete your iCloud account, you just open a new one with your new email address. Is that true, and, if you do that, do you lose your photos on your iPhone. AND, if you lose your photos on your iPhone, will they be pushed back to your iPhone if you manually sync your phone and PC?
I am hoping someone out there can help!
Thank you.If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll. -
Is there anyone have the same problem?
Actually, if I read the release announcement correctly, it is available on "new" purchases." So even if you had a 5 from before the announcement, I'm not sure you would qualify.
-
I have somehow linked my Apple ID and icloud ID to 2 different iphones. I need help on how to disconnect one of the iphones from my ID and give it a new one. Hopefully without losing all of the saved information on the phone (contacts, pictures, etc)
Can anyone help me with this?Hey shelldolfin,
Thanks for the question. To disassociate a phone from your Apple ID and iCloud account, simply sign out of the following services:
- Settings > iCloud (When prompted, opt to keep the information on your phone)
- Settings > Messages > Send & Receive
- Settings > FaceTime
- Settings > iTunes & App Store
For further information, see this related article. While it refers to what to do after you change your Apple ID, you can use the helpful information to achieve your end goal:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M.
Maybe you are looking for
-
Why is this happening? calls not coming through properly.
I have done a few searches on google. but i have found nothing that really answers my problem. everything is from the 2.0/2.1/2.2 era. Ok, My problem: 1. When someone calls me, sometimes my phone plays ball and rings as it should do. Other times, lik
-
Saving Sequence Diagrams in Sun Java Studio Enterprise 8
I'm having trouble saving my sequence diagrams! I create the diagrams press ctrl-s, click the Save-All button, when I close and reopen SJSE8 some of my diagrams are missing! When I look in the directory it appears that they have been saved because I
-
When I press to the left of the home button, the screen lights up
When I press to the left of my home button, the screen lights up as if I were pressing the actual button. This causes Siri to pop up randomly all the time and my phone keeps accidently taking screen shots. Should I take it in?
-
Dynamic Parameter Issue - Crystal XI
I've been working in 9 and 10 for a couple of years, and have recently moved to 11 to create some reports for a client. I have an issue with creating a dynamic parameter in Crystal 11 - it won't allow me to select dynamic (as in the radio button is
-
Accessing CMOS memory via UEFI
Hi, I want to read the CMOS (128 bytes NVRAM that the PC uses to store RTC and other system related data) http://www.bioscentral.com/misc/cmosmap memory map via UEFI. Is this possible? If so can you please let me know the functions? Regards, Flash