HT204053 what is the monthly cost of using icloud

What is the monthly cost of using icloud on your iphone or pc

kzin69 wrote:
What is the monthly cost of using icloud on your iphone or pc
None... iCloud is Free... > http://www.apple.com/icloud/
https://discussions.apple.com/message/17292613#17292613

Similar Messages

What is the monthly charge to use the HOTSPOT option on the Samsung Continuum

What is the monthly charge to use the HOTSPOT option on the Samsung Continuum?

peanpugdad wrote:
What is the monthly charge to use the HOTSPOT option on the Samsung Continuum?
$20 for 2GB and$20 for every 1 GB overage.

What is the monthly cost of apple tv

I want to know what the monthly costs of apple tv are

Some information in this article and video "might" be useful in your question
Apple TV
Per Apple policy, we want you to know we might benefit from your visit to our free information or even profit.
We hope you find the information and video(s) useful.

What is the monthly cost to add an addittional smartphone?

My daughter would like a phone for Christmas. We are attempting to determine what the additional monthly costs would be to add a additional smartphone to our plan (above and beyond the initial costs for the phone itself).

That would depend on the plan and the way you purchase the phone. More Everything - $40 line access, discounted for EDGE payment plan, or no contract purchase (full price) based on total data bucket. $9.99 line fee and $30 for 2gb data if you are on the old Nationwide plan and want to stay there.
Basically $40 added to your monthly bill for the additional line and data...with a [possible discount based on other factors.

What is the monthly cost of hosting Muse?

I was wondering if the cost of hosting was covered in the $49.99 plan ?

With the Creative Cloud Subscription you get five free Muse site hosting on the webBasics plan with Business Catalyst.

I travel between countries often for my work. What is the best iphone to use for international calling at a reasonable cost?

I travel between countries often for my work. What is the best iphone to use for international calling at a reasonable cost?

All six Uk carriers carry the iPhone officially and micro sims are very common therefore
PAYG is very common in UK every carrier offers a number of packages but all commitment free
http://support.apple.com/kb/ht1937
List of Turkish Carriers within this doc

What is the actual cost of these plans?

What is the actual cost of these plans?
* $59.99 a month for 450 minutes
* $79.99 a month for 900 minutes
* $99.99 a month for 1,350 minutes
Although they will very, Answers welcome from anyone in the USA. So I can have and idea of the cost with taxes and fees. I am located in both LA and NYC. I currently have a NYC number with Verizion using the 450 minutes plan. The plan cost $39.99 before taxes and fees and $48.42 after taxes and fees.
Breakdown of Monthly Access Charges:
450 minute plan: $39.99
Verizon Wireless' Surcharges and Other Charges & Credits: $3.31
Taxes, Governmental Surcharges & Fees: $5.12
Total Current Charges: *$48.42*

My plan total is $84.99/month, then with taxes and fees it comes to $93.40 each month as the total bill. The biggest fee is the state sales tax, at just over $5 on my last bill. Then the 911 fees, fed regulatory fees, and all that are a few bucks each.
My plan -
450 Minute (required) $39.99
Unlimited Data (required) $30
1500 Text msgs (optional) $15
Total = $84.99

How much would be the monthly cost to host a small Linux instance in Azure?

Hello Guys,
I just wanted to ask how much would be the monthly cost of hosting a Small instance of Linux VM in Azure. I doubt this
detail has all the pricing parameters included. It’s just the VM itself it seems.
I know there is a pricing calculator but I’m not sure what parameters would be involved for this very basic instance. If you guys can give me an example calculation or at least point me to the basic parameters to include in the calculation, I will really appreciate
it.
FYI – these instances will be running a FreePBX system. I hope this helps to point out which parameters should be considered and included in the calculation.
Thank you very much,
Arnel

Hi Noctis0791,
Thanks for your feedback. As far as I know, Azure didn't support Provisioned IOPS. You could submit the feature request on custom wish (http://feedback.windowsazure.com/forums/217298-storage/suggestions/4900829-provisioned-iops
And about billing question, I suggest you could contact azure billing support team to get more detail.
Channel:
Please contact support team by creating a support ticket at http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Please try it.
Thanks
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What is the most cost effective way to have a broken screen repaired?

What is the most cost effective way to have a broken screen repaired?

One thing to bear in mind, if your iPad is still under any sort of warranty, using any unauthorized repair place may void that.
So you may find less expensive places that are non-authorized, but once you use them, Apple disowns your device and if you have any warranty left, it'll be void.

What are the possibilities sending notifications using TTY

What are the possibilities sending notifications using TTY? And how to integrate TTY with Siebel

Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered

What is the actual cost of SAP original Software?

hi experts
<b>What is the actual cost of SAP original Software to implement in one software company.</b>
thanks in advnace

Between $1 and $100,000,000.
Lots of variables... yearly licensing fees or full purchase, R/3 or complete NetWeaver suite, single user or multi-user, several levels of support or no support, implementation partner expenses, types of hardware, etc....
EDIT:
I just noticed you said "one software company". There are other options if you want to be a "partner". It is one thing to use the software to run your company, it is another if you want the software because your company wants to develop add-ons.
Message was edited by: Norman Salter

What are the possible cost objects for raw material consumption postings

what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).

For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number. If you are using movement type 201, then the system prompts you to enter the cost center and so on.
Thanks,
Madhav Nanduri

I have an IMac intel OS x 10.8.2, I would like to know what is the best program to use to make movies and burn them to a DVD???

What is the best program to use that will be compatable with a IMac intel OS x 10.8.2, that will allow me to make movies, add music then burn it to a DVD. The program I have now, will make the movie but will not burn it???

You want iDVD.
Purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219
Yes, there are programs that will put a movie on a DVD. I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others. None of them come anywhere near the ease-of-use and power of iDVD.

What is the best method of using an iPad as an extra screen for a macbook pro?

I just received a macbook pro what is the best method for using an ipad as an extra screen for an ipad? Hopeflly, one that is no cost to me.

Sorry, but are you incapable of looking things up for yourself? Everything that you have asked is easily searchable on the internet.
I used it over wi-fi.
http://avatron.com/apps/air-display

Hi guru's what are the function modules are used in ALV

hi guru's what are the function modules are used in ALV

Hi vasu,
There are some function modules which will enable to produce the reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
some theory regarding alv:
This table tells ALV which events are processed by the caller by CALLBACK.
The table of possible events per list type can be initialized using the module REUSE_ALV_EVENTS_GET.
You can display the names of the constants in the type pools SLIS which represent the individual events using the individual test function in the function module
REUSE_ALV_EVENT_NAMES_GET. Only events with a form routine name are processed.
The table structure contains the fields:
IT_EVENTS-NAME
Name of the Callback event.
Possible Callback events:
Action
USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD
Process actions on the list
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
PF_STATUS_SET USING RT_EXTAB TYPE SLIS_T_EXTAB
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status.
As this is a frequently-used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
ITEM_DATA_EXPAND USING RS_SELFIELD TYPE SLIS_SELFIELD RFLG_ALL TYPE C
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT.
Exit for passing item entries (ITEM table) for a header record which was expanded interactively by the user.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header which is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table. RS_SELFIELD is initial in this case.
CALLER_EXIT USING RS_DATA Is called at the beginning of the function module to make special settings. It is not usually used.
List processing events
IMPORTANT: The application Callback routine must not manipulate the internal output table and/or its header record. This restriction applies to all Callbacks which are called in the list output and run under the 'List processing events'.
TOP_OF_LIST no USING parameter. Information output at the start of the list
END_OF_LIST no USING parameter. Information output at the end of the list
TOP_OF_PAGE no USING parameter
Equivalent to the list processing TOP-OF-PAGE event
END_OF_PAGE no USING parameter. Not available for hierarchical-sequential lists.
Information output at the end of a page. This is only called for printing.
TOP_OF_COVERPAGE no USING parameter
The selection information and list status are output together (if they exist) on a separate page by default. See also the documentation of the parameters:
IS_PRINT-NO_COVERPAGE
IS_PRINT-NO_PRINT_SELINFOS
IS_PRINT-NO_PRINT_LISTINFOS
IS_LAYOUT-GET_SELINFOS
The user can format the header area of the 'cover page' himself or herself by specifying a Callback routine for this event.
END_OF_COVERPAGE no USING parameter
Analogously to TOP_OF_COVERPAGE the user can add other information to the information output by ALV (selection information, list status) at this event.
FOREIGN_TOP_OF_PAGE no USING parameter
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
FOREIGN_END_OF_PAGE no USING parameter
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
AFTER_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
Internal use only
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX
IT_EVENTS-FORM
Name of the form routine which should be called in the calling program at the event.
Field_catalog:
Field catalog with field descriptions
2.7.1. Description
Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields). A field catalog is required for every ALV list output.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module
See also the documentation of the function module REUSE_ALV_FIELDCATALOG_MERGE.
The minimal field catalog is documented under 'default'. The caller can use the other optional parameters to assign output attributes to a field which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE.
all fields in this structure are to be output
the structure name is passed to ALV in the parameter I_STRUCTURE_NAME.
See also the documentation of the IMPORTING paramter I_STRUCTURE_NAME.
Positioning
row_pos (row position)
value set: 0, 1 - 3
Only relevant if the list output is to be multi-line (two or three lines) by default.
A multi-line list can also be defined by the user interactively if the default list is one-line.
The parameter specifies the relative output line of the column in a multi-line list.
col_pos (column position)
value set: 0, 1 - 60
only relevant when the default relative column positions differ from the field catalog field sequence. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the field catalog field sequence.
Identification
fieldname (field name)
value set: internal output table field name (required parameter)
Name of the internal output table field which is described by this field catalog entry
tabname (internal output table)
value set: SPACE, internal output table name
This parameter is used in 'manual' field catalog build-up only for hierarchical-sequential lists.
Name of the internal output table which contains the field FIELDCAT-FIELDNAME.
Data Dictionary reference
ref_fieldname (reference field name)
value set: SPACE, Data Dictionary field name
Name of the Data Dictionary field referred to.
This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
ref_tabname (reference table/structure field name)
value set: SPACE, name of a Data Dictionary structure or table
Structure or table name of the referred Data Dictionary field.
This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Reference to fields with currency/measurement unit
Each internal output table sum or quantity field whose decimal places are to be formatted appropriately for the unit in the list must follow the convention:
the field is of data type QUAN or CURR (internal type P) (the field must really have this physical data type. Overwriting the physical data type with the parameter FIELDCAT-DATATYPE has no effect)
There is a field in the internal output table which contains the associated unit.
There is also an entry in the field catalog for the unit field.
(If the unit is not to appear as a column in the list, and cannot be interactively displayed as a column, e.g. because it is always unambiguous and is therefore explicitly output by the caller in the list header, the field catalog units field entry can take the parameter FIELDCAT-TECH = 'X'.
The association of a value field to a unit affects the output as follows:
appropriate decimal places display for the unit
an initialized field with a link to a non-initial unit is output as '0' for the unit (if FIELDCAT-NO_ZERO is initial). When this field is summed, this unit affects whether the units are homogeneous.
an initialized field with a link to an initial unit is output as SPACE. When this field is summed, the unit SPACE does not affect the homogeneity of the units.
When non-initial fields with an initial unit are summed, the unit SPACE is considered to be a unit.
Link to currency unit
cfieldname (currency unit field name)
value set: SPACE, output table field name
Only relevant for amount columns with associated unit.
Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
ctabname (internal currency unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Link to measurement unit
qfieldname (measurement unit field name)
value set: SPACE, output table field name
only relevant for quantity columns with unit link.
Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
qtabname (internal measurement unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Column output options
outputlen (column width)
value set: 0 (initial), n
For fields with a Data Dictionary link this parameter can be left initial.
For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
initial = column width is the output length of the referred Data Dictionary field (domain).
n = column width is n characters
key (key column)
value set: SPACE, 'X' 'X' = kex field (key field output in color)
Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
For exceptions see the documentation of the FIELDCAT-KEY_SEL parameter.
key_sel (hideable key column)
value set: SPACE, 'X'
only relevant when FIELDCAT-KEY = 'X'
Key field which can be hidden interactively.
The key column sequence cannot be changed interactively by the user.
The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
no_out (field in field list)
value set: SPACE, 'X' 'X' = field is not displayed in the current list.
The user can interactively choose the field for output from the field list.
The user can display the contents of these fields at line level using the 'Detail' function.
See also the 'Detail screen' documentation of the parameter IS_LAYOUT.
tech (technical field)
value set: SPACE, 'X' 'X' = technical field
Field cannot be output in the list and cannot be displayed interactively.
Field can only be used in the field catalog (not in IT_SORT, ...).
emphasize (highlight columns in color)
value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off '1'=on)
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
C: Color (coding must begin with C)
x: color number
y: bold
z: inverse
hotspot (column as hotspot)
value set: SPACE, 'X'
'X' = column cells are output as hotspots
fix_column (fix column)
value set: SPACE, 'X'
Not relevant for block lists (output of several lists consecutively)
'X' = column fixed (does not scroll horizontally)
All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively. See also the documentation of the Layout parameter
IS_LAYOUT-NO_KEYFIX of the IMPORTING paramter IS_LAYOUT.
do_sum (sum over column)
value set: SPACE, 'X' 'X' = a sum is to be calculated over this internal output table field.
This function can also be called by the user interactively.
no_sum (sums forbidden)
value set: SPACE, 'X' 'X' = no sum can be calculated over this field, although the data type of the field would allow summing.
input (column ready for input)
Function not available
Format column contents
icon
value set: SPACE, 'X' 'X' = column contents to be output as an icon.
The caller must consider the printability of icons.
symbol
value set: SPACE, 'X' 'X' = column contents are to be output as a symbol.
The internal output table column must be a valid symbol character.
The caller must consider the printability of symbols.
Symbols can usually be printed, but may not always be output correctly, depending on the printer configuration.
just (justification)
value set: SPACE, 'R', 'L', 'C'
Only relevant for fields of data type CHAR or NUMC
' ' = default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output
The justification of the column header always follows the justification of the columns. Independent justification of the column neader is not possible.
lzero (leading zeros)
value set: SPACE, 'X'
Only relevant for fields of data type NUMC
ALV outputs NUMC fields right-justified without leading zeros by default.
'X' = output with leading zeros
Note: If a NUMC field is output left-justified or centered by FIELDCAT-JUST, leading zeros are output. If the output of leading zeros is suppressed by a Data Dictionary reference ALPHA conversion exit, the output is always left-justified.
no_sign (no +/- sign) Only relevant for value fields
value set: SPACE, 'X' 'X' = value output without +/ sign
no_zero (suppress zeros) Only relevant for value fields
value set: SPACE, 'X' 'X' = suppress zeros
edit_mask (field formatting)
value set: SPACE, template
template = see documentation of WRITE formatting option USING EDIT MASK template
The output conversion conv can be made by template = '== conv'.
Texts
The following text parameters should be specified for program fields without a Data Dictionary reference. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored. If the user changes the column width interactively, the column header text with the appropriate length is always used. The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition, sort, etc. popups.
seltext_l (long field label)
seltext_m (medium field label)
seltext_s (short field label)
reptext_ddic (header)
analogous to the Data element maintenance 'Header'
The specified text is not necessarily output in the list, an optimum among all texts is sought.
ddictxt (specify text)
value set: SPACE, 'L', 'M', 'S'
You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Parameters for program fields without Data Dictionary reference
see also 'Text' parameters
datatype (data type)
value set: SPACE, Data Dictionary data type (CHAR, NUMC,...)
Only relevant for fields without Data Dictionary reference
Program field data type
ddic_outputlen (external output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
FIELDCAT-INTLEN = n
see also the documentation of the parameter FIELDCAT-INTLEN
n = external format field output length
The column width FIELDCAT-OUTPUTLEN need not be the same as the external format output length (FIELDCAT-DDIC_OUTPUTLEN).
intlen (internal output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
FIELDCAT-DDIC_OUTPUTLEN = n
see also the documentation of the parameter FIELDCAT-DDIC_OUTPUTLEN
n = internal format field output length
rollname (data element)
value set: SPACE, Data Dictionary data element name
F1 help can be provided for a program field without a Data Dictionary reference, or F1 help which differs from the Data Dictionary help can be provided for a field with a Data Dictionary reference, using this parameter.
When F1 help is called for this field, the documentation of the specified data element is displayed.
If the FIELDCAT-ROLLNAME is initial for fields with a Data Dictionary reference, the documentation of the data element of the referred Data Dictionary field is output.
Others
sp_group (field group key)
value set: SPACE, CHAR(1)
Field group key.
Keys are assigned to group names in the IT_SPECIAL_GROUPS parameter (see also the documentation of the parameter IT_SPECIAL_GROUPS).
When such an assignment is made in the field catalog and in IT_SPECIAL_GROUPS, the fields are grouped correspondingly in the display variant popup.
reprep (Report/Report interface selection criterion)
value set: SPACE, 'X'
Prerequisites:
The system contains the Report/Report interface (function group RSTI, table TRSTI)
Parameter LAYOUT-REPREP = 'X'
(see also the documentation of the parameter LAYOUT-REPREP of the IMPORTING parameter IS_LAYOUT )
'X' = When the Report/Report interface is called, the value of this field is passed in the selected interface start record as a selection criterion.
2.7.2. Default
The following entries are usually sufficient for internal table fields with a reference to a field defined in the Data Dictionary :
fieldname
ref_tabname
Notes:
ALV gets the remaining information from the Data Dictionary.
If no relative column position (COL_POS) is specified, the fields are output in the list in the order in which they were added to the field catalog.
REF_FIELDNAME need only be specifid when the name of the internal table field differs from the name of the referred Data Dictionary field.
Information which is explicitly entered in the field catalog is not overwritten by information from the Data Dictionary.
Priority rule:
Entries in the field catalog have priority over differing entries in the Data Dictionary.
The following entries are usually sufficient for internal table fields without a reference to the Data Dictionary (program fields):
fieldname
outputlen
datatype
seltext_s
seltext_m
seltext_l
Notes:
F1 help can be provided for program fields by assigning a data element to the parameter ROLLNAME.
If the parameters SELTEXT_S, SELTEXT_M, SELTEXT_L, and REPTEXT_DDIC contain appropriate field labels, the program field column headers are also adjusted appropriately when the column width changes
sites :
http://www.sapdevelopment.co.uk/reporting/alv/alv_variousfcat.htm
<b>plese reward if useful </b>
Message was edited by:
sunil kairam

HT204053 what is the monthly cost of using icloud

Similar Messages

Maybe you are looking for