HT204053 Where are the settings

They asked me to go to my settings and then to my I cloud. How do I do this.

Welcome to the Apple Community.
What device are you using.

Similar Messages

Where are the settings to make Acrobat software recognize my scanner?

Where are the settings to make Acrobat software recognize my scanner? I've had my computer on a road trip. When I returned to the home office, I can't get Adobe Acrobat 10 Pro software to recognize my scanner, which is a 4-in-one printer. Acrobat will print to the printer, but I can't get it to recognize the scanner to scan a document. Any suggestions as to how to fix this?

Open the Acrobat application(Acrobat X) and later navigate to Create>PDF from scanner>Configure presets and later select the Scanner which is connected to your computer and check it will work.
If you are getting two options ie WIA and TWAIN please select TWAIN as Acrobat is compatible with TWAIN interface than WIA.

Where are the settings for the internal Airport Extreme Card?

Here is my problem.
I have a Xbox Slim. It was connected wirelessly to my old Mac computer which had a external Airport Extreme b/g. Connection worked perfectly and had no issues.
I bought a new computer a iMac with OS X 10.6.7. It comes with a built in Airport Extreme Card that has wireless connection for b/g/n.
I set up my wireless connection on my new computer. We have two iphones and they both connect to the new wireless network with no problems.
When I go to connect my xbox slim it asks me for WEP, which I enter, but when I go to test connection I get a error message. The connection fails between the xbox and my network. Says unable to connect and then gives me a bunch of troubleshooting messages which none seem to work.
Under the IP Settings is says Automatic and has a IP address listed and a Subnet Listed. The Gateway is all zeros.
When I go into the Airport settings the DHCP is turned on.
Now I know my next option is enter the numbers manually which I have tried several times. I don't really know if I'm getting the right numbers or not because its a new iMac and everywhere I search people are getting the IP addresses, router numbers, etc. from PC's or from external routers. I need to get mine from the internal Airport Extreme Card.
I have also read posts for setting your options for Mac Filtering. But I don't know where to adjust these. I don't see any options for configuration for a internal Airport Card.
Where do I adjust the settings for Mac Filtering, Signal Strength, b/g/n, etc?
I know my Xbox's connection is fine because I plug in my old Airport Extreme and it connects just fine. But I don't want to use my old wireless router. I would like to just use the connection that is built into my iMac because it has the 'n' network. Is that even possible?
Any help would be greatly appreciated. Thanks in advance.

ImperialStout wrote:
I don't see any options for configuration for a internal Airport Card.
there aren't any.
check out [this|http://discussions.info.apple.com/message.jspa?messageID=3797169] discussion. it is rather old but the facts remain unchanged.
you might want to have another look @ your airport extreme or get a newer, [refurbished_|http://store.apple.com/us/browse/home/specialdeals/mac/macaccessories?mco=MjEwNzM3NjE] extreme (there currently aren't any) or time capsule. these base station are *simultaneous dual-band* capable, meaning they broadcast on both the 2.4 and 5 GHz bands @ the same time.

Where are the settings to invoke SSL for POP3 and SMTP?

I keep getting annoying emails from Yahoo!AT&T who are my internet providers about setting SSL settings for POP3 and SMTP services for receiving emails. I have it configured on my main email settings for my client. Do I have to set it as well for Blackberry service thru Verizon?
If so, where are these detailed settings located?
Thanks,

Located on your providers BIS site.
BlackBerry Help
www.blackberryboards.com

Where are the settings and import buttons

I finally got my home sharing to work. But after selecting all, there are no "settings" or "import" buttons on the bottom right of iTunes. Help!

This button does not exist on my computers either. Been looking all day. Can share music but can't transfer library ITunes you are about to lose a customer.

Where are the settings for the "open" command, located at /usr/bin/open?

I have Windows XP installed on a partition on my Macbook and I use Parallels to access some of the Windows applications.
When I am in Mac OS X, and I don't even have a virtual machine running, if I enter the following command in the terminal, I get some really strange behavior:
/usr/bin/open -a firefox http://localhost/~myname/somewebpage.html
The open command will launch firefox within Mac OS X and display the page, but, it WILL ALSO TRY TO LAUNCH FIREFOX VIA PARALLELS. So, it starts a Parallels session and tries to launch Firefox. I see the Firefox icon in my dock twice, once normally, and once with the Parallels version of the Firefox icon. But, I cannot view the Parallels instance of Firefox.
In order to debug this, I removed Firefox from Mac OS X (deleted Firefox.app from my applications folder) and I un-installed it from the windows partition using Add/Remove programs in windows.
Now, running the open command as stated above launches Safari in Mac OS X and it still launches parrallels.
Where is the list of application associations that the "open" command uses? I assume there is some incorrect associate that is causing this but, I have no idea how to find it.
Thanks in advance for any advice you can give.

Thank you for your reply.
I actually checked out the man page for "open" but, I was unable to find LaunchServices in the finder. I was hoping there would be some sort of manifest, or application map, within LaunchServices that might be the source of my problem.
Regarding using the full path: Good suggestion. That will clear it up when I use the command line, or if I were writing my own app, etc...unfortunately, I became aware of this problem because Netbeans is using the command in the abbreviated form I posted above (to launch web applications I am debugging), and I can't edit it.
I removed Firefox from both Windows and Mac OS X on my machine, and tested the Netbeans functionality, it launched my application in Safari with no errors. I reinstalled Firefox on my Mac OS X partition and selected it in Netbeans preferences as the browser to use when debugging an app. When I tried to debug an application in Netbeans again, I got the same behavior...parallels launched. Ugh.
There was a folder, on the Windows side of things, called something like Parallels\Shared Applications. It had a shortcut to Firefox in it but, I removed that before doing my testing. I was hoping there would be something similar on the Mac OS X side but, I haven't been able to find anything.
Thank you both for your help. I think I might need to visit the Parallels forums for this one.

HT201269 where are the settings stored

Are the setting on my iPhone stored on the phone or in the SIM card?

iPhone stores no data on a sim card. All any iPhone sim card contains is your carrier account info.

Where are the settings/preferences for firefox?

I am trying to find the settings/preferences for firefox but I updated my firefox and now cannot find them.

Why didn't I think of that .... In any event, I found the answer. The issue lies within the "automatic proxy detection" selection. If its selected and OSX cannot determine the proxy, this causes a cascading failure on upgrade websockets using ws:// protocol headers. You need to uncheck the automation, and the manual HTTP and HTTPS proxy settings will be used for all protocol headers that originate from HTTP/S including the WS handshake upgrade and connection protocol.

Where are the settings stored?

I have messages that have the color set on them for organizational purposes. I want to copy these settings to another MAC. Where is this information located?
(The rules I have copied... I want the INBOX to show the same coloring on the other MAC.)
Thanks!

This is an IMAP account by the way... So you think that when I mark a message RED for example, that this information is stored in the general MAIL preference file? I would have expected to find it somewhere in the /users/Library/Mail folder, as it relates to a specific message. The RULES I have been able to move just fine... it's just that when I COLOR a message on one computer I want that color to show up on the other computer as well... Does this make any sence at all?
(Using .mac to sync results in the same problem. The rules are synced, but the modifaication I made to the individual IMAP message does not sync. Flag, Color, etc.)

Where are the settings located to set the path for CFC Components in CF9?

I have 2 coldfusion 9.0.1 instances running as separate windows services and they are some how cross referenced to one another. I need to fix this and I know it is just a matter of repairing a setting somewhere that is not readily available in the CFAdmin page and does not appear to be in any of the files located under the instances CFIDE and WEB-INF directories. Any help would be highly appreciated.

You can map a path to components in each instance application.cfc. this.mapping["/components"] = "C:\ColdFusion9\wwwroot\sitename\components\"; for example.
^_^

Where are the settings for blocking installation by websites stored, and how can you edit them?

An external app (my work Lotus Notes webmail) wanted to install something and I accidentally clicked "deny" and "remember this", when I wanted to allow it. Now I have no idea where I can remedy this. Any ideas?

Where do you click that button?
Is that on a web page?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Where are the settings for printing onto thicker?

Hello.
On my new MacBook Pro OS X 10.7.2 I have not been able to locate the printer settings that allow one to specify paper type (i.e., paper thickness). I used this feature frequently on my previous MacBook as it allowed me to dramatically improve the quality of printing from my laser printer when printing onto various thicker paper stocks. I sooo hope it's still there and I'm just overlooking it!
Many thanks in advance,
Liz

A few things to check (apologies in advance if you have already checked these).
The default print dialog for many apps does not show the printer menus. For some you need to press the Show Details button. For others you need to press the Printer button on the bottom of the print dialog to access the printer menus.
Another thing to note is the driver. If you were using a different driver on a previous version of OS X, the new driver to support Lion may not have the same menus. If you can tell us the model of printer you have and possibly the version of that driver (this can be found in System Information > Printers) then we could download and install this driver and have a look ourselves.

Where are the settings

I am not sure I like what the front row displays as far as how it organizes and such, is there a way to change this...i.e. for movies it has projects folder and so on.

Front Row 1.x had NO options to choose at all. No one here can speak for Apple, this is a user-to-user forum, but they seem to be taking configuration options in small steps. If there's a specific option or feature you'd like to see, I would suggest you send Apple Mac OS X feedback. Those messages will get to the right group(s) at Apple.
-Doug

Where are the Auidio/ Video Settings

Capture tells me to adjust the Audio/Video settings. Where are these settings and what do I set them to.

John,
Set the Easy Setup to AVCHD 1920x1080i 50 or 60 for PAL or NTSC respectively.
Save a Project with these settings assuming your footage is AVCHD.
File>Log and Transfer over USB should do the job.
Al

Experts - where are the main settings for country currency settings

Hi
where are the main settings for different country currency settings.
Ex:
us,canada and europe customers us$, canada $, europe euro,
How the pricing will effect for different country customers?
Any one can help me on this.
Any documents on thes please send to [email protected]
Thanks
Kris

You can find this in the following path.
SPRO->GENERAL SETTINGS> SET COUNTRIES>DEFINE COUNTRIES-->
Here countries have an ISO CODE
Then
SPRO->GENERAL SETTINGS>CURRENCIES-->CHECK CURRENCY CODES
Here ISO codes mapped to currencies.
If CCode currency = Customer master currency, then transactions will happens in that currency
If CCode currency<> Customer master currency, then the exchange rate will come into play to convert customer currency to company code currency.
And anway if you want a different currency from the country currency, you can mention that in ccode configuration. The presence of currency in company code configuration is must and hence configuration at country level is not needed I think
Hope this helps.
Rewards pls
Message was edited by:
Navaneetha Krishnan

HT204053 Where are the settings

Similar Messages

Maybe you are looking for