HT204104 After liquid spill on a iPhone, can the phone work again?
AAhmad
iPhone 4s
iOS8
Phone will not turn on after liquid spill on it
After liquid spill on a iPhone, can the phone work again?
You can ,if in US or Country that offers the service, exchange a liquid damaged iPhone and a 4S is $199 + tax in the USA
Out of Warranty service at an Apple Store Genius bar
Similar Messages
-
I've tried upgrading my iPhone 4S using iTunes 12.01.26 on 4 different computers at home and at the office:
Macbook Air - OS X version 10.7.5
Macbook Pro - OS X Yosemite
2 PCs running Windows 7 Professional
iTunes downloaded the installer and the installation process seemed to get 90% complete before showing the error, "The iPhone, "iPhone" could not be updated. An unknown error occurred (6)."
The phone is now stuck on the red iTunes logo screen:
How can I get it out of this mode?
I've tried holding the power button and home buttons down for ten seconds, then letting go of the power button, but keeping the home button down for another 10 seconds. I've also tried Reiboot, Wondershare Dr. Fone in desperation to try to get the phone out of this mode. Nothing seems to fix it.
If anyone has any suggestions, please let me know.i do that but it keeps getting stuck on the 'preparing to restore i phone' screen for a few mins before coming up with 'unknown error 1603'.
Just doublechecking. Have you worked through the 1603-specific instructions from the following document?
[Update and restore alert messages on iPhone and iPod touch|http://support.apple.com/kb/TS1275] -
New iPad Air 2 (December 2014) with a persisting blank screen. Support site suggests a restore after turning off 'Find my iPhone' on the device. How can I do this with a blank screen?
Thanks JimHdk,
After a little more searching across various online resources I was able to cure it by holding down the home button and the on/off button for 10 seconds to restart it and it all came back with a clear screen. -
i bought this i phone from my cousin and it was with telus. they unlocked it. i came home and did a restore on the phone. i put a virgin mobile sim card in it and now can only recieve phone calls and call out. no messaging or data or anything else. I have done two restores since and removed my sim card. reset network settings and am running out of patience. the phone worked absolutly fine before upgarding to the new 6ios. please help me.
To be honest not being able to send or recieve messages and data is a carrier issue, not a phone issue since u said that your calls are working, if i were you my first course of action would be to get a new sim card from virgin mobile, or to restore the device as new one more time, if you restore the device as new AND get a new sim card from your carrier and those features still dont work, i would take the device to an apple store
-
I had my iPhone 5c stolen this Tuesday afternoon while I was at the beach. Immediately after I noticed it missing I called the phone and it was off. I called the phone continuously later that night but it remained off. I did not use the Find my iPhone app until the following morning, however.
The phone has said offline for 2 days now. I'm wondering...is it reasonable to assume that eventually the phone will get turned back on and I will get a location? Or do thieves have ways around this? I do have a passcode on my phone. Once the phone is turned on to the locked screen, is it connected to the internet?
I filed a police report but the police seem to be pretty disinterested in helping me recover my phone. I literally got this thing on Monday and had it stolen Tuesday the next day. I was so excited about my new phone so I realize now I was texting like a little girl out there and probably was an easy target. Never bringing anything of value to the beach again, thats for sure.i m also put passcode in my iphone...but i dont know that how i know that my passcode is crack by someone???and same as police is not interested to find out it..
i want ma iphone backkk........... -
my ipone 3g is frozen with aitunes logo and plug after i tried to update it from apple. the phone worked fine even thou i changed carriers from at&t to Simple celleur. How can i get my phone to work?
As AT&T has not officially unlocked your phone it must have been hacked to use another carrier. So when you updated it has relocked itself to AT&T. There is no official unlock so this will happen anytime you update.
-
Can I use Google Sync to transfer only my contacts from my IPhone 4 to my gmail account? I do not want to sync info from Gmail to the IPhone. Can the sync work only one-way? I have 0 contacts & 0 calendar events on my gmail account. I opened the Gmail account specifically to for the Google Sync and wil only be using this account as a back-up for my IPhone contacts. Please Help!!
You do realize that the SIM only contains account information for your wireless account.
Moving the SIM from phone to phone does not cause any of your iTunes content, contacts, email, etc to magically appear on the device. -
I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now, my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!
Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
I would like to buy an iPhone for my friend in Iceland. Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?
Bad idea. There are no supported iPhone carriers in Iceland, thus some features may or may not work. Further, there will be no warranty or support for a US purchased iPhone in Iceland...your friend will be on their own. If you still want to go down this road, make sure you purchase an officially unlocked iPhone(GSM model) directly from Apple.
-
While erasing memories from iPhone 4, the phone gets switched off and can't turn on back
while erasing memories from iPhone 4, the phone gets switched off and can't turn on back. Please help.
What exactly do you mean by "erasing memories"?
-
I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?
It's possible, I suppose. Unlikely, but possible. Someone would have to be extremely driven to fix your broken phone specifically to look at your notes though.
-
iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs itunes???
Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I was updating my iPhone 3GS, left it overnight and woke up to find that there was an error and my IPhone could not be restored. What can I do to make my phone work again? Have I lost all the data?
If your phone is in recovery mode, all data are gone. Connect the phone to iTunes on your computer and restore.
-
Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc
Hello,
I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
THAT was not an option!
BUT it seems to solve my problem in the following way after trying a lot of possibilties:
In the menue properties/help (don't know the exact english word, because I run my phone in german)
I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
Today the flash feature was responding to different push notes very slowly.
By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
the problem appeared. Switching the LED-flash off: problem disappeared!
It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
treated my phone very hard today to double check, but its still ok.
@Apple:
Please fix that issue in the next update.
Hope, this helps you guys as well. -
I can not make or receive calls! other functions itself. Internet, sms, whatsapp work. I restored as new iphone from the phone and from itunes and still not working.
Sorry for my english i'm spanishI have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc). Any suggestions? What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?
Maybe you are looking for
-
How to create a configuration file for open ldap.
hi, I have installed open ldap on my machine. Now I want to configure it to NetWeaver. For this, I started configuration through configtool utility of NetWeaver. While configuring, we need to select or upload configuration file. But now as it is open
-
I have forgotten my password how can I log in?
Hi I have bought a new mac book air and have already forgottten the password! How do I log in there is no data to lose
-
Resized and shrunk down image is distorted on ios/android
It should be something very simple that just dont know. When i proprtionally resize large image and display it on my mobile apps (ios & android) the image is slightly distorted and some smaller texts are little hard to read, or just doesnt look good
-
Will audition 3.0 work with win 8.1
Migrating from Vista to Win 8.1, We have been using audition 3.0 with Vista
-
Record the output of a Plug In
Hi to all! I am new in music technology and to Logic Pro 8. I want to record the output of a Bus in which I have Inserted a plug in. please help. thanks again. Does anyone know a good place online with LogicPro tutorials??? thanx again