HT204135 my printer works but i can t print in black and white

i hane an epson nx515 it s works but the problem i cant print in black and white ,i have a mac 10.7.3

Using the Preview application as a reference, if you select to print and only see a limited amount of information, you need to press the Show Details button in the print dialog to see the additional menus. Then, if you click on the Preview menu you may see a Color menu and within this could be a Grayscale setting, which will print using only the black ink. This is what I see with my Canon inkjet, not sure what menus exist in the Epson but I would expect there to be something similar.

Similar Messages

Help! Photoshop is in RGB mode but I can only paint in black and white

It seems like Photoshop is stuck in B&W. As soon as I open my document, it shows at the top that it is in RGB/8 mode. I've tried clicking Image>mode>RGB again just to be sure but it's already set to RGB. The document is one layer so there's no way another layer is affecting it. Does anyone have an idea what may be going on? I'd appreciate any help I can get!

If it says rgb/8 then it is in rgb 8 bit mode.
If your opening a file, it could be 1 or more of the channels are missing or a single channel is selected. Take a look at the channels panel and see if the RGB channels are there and RGB is selected.
{odds are this is not it as the name of the channel would replace RGB/8 ex. selecting the B channel would display Blue/8 instead of RGB/8}
Make sure your document is not in quickmask mode (hitting the q key switches between quickmask and normal mode)
{odds are this is not it as quickmask/8 would be displayed instead of rgb/8}
Make sure you don't have a mask selected
{Odds are this is not it as layer mask/8 would be displayed instead of RGB/8}
Take a look at your swatches and verify there are colors there and not shades of gray
{Odds are this is not true because RGB/8 is displayed}
And finally verify what adjustment layers are applied to the layers panel - Several adjustments are capable of changing the display to black and white while retaining the RGB/8 mode.
If none of this helps then post a screen shot of photoshop with the layers panel and the channels panel open. You can drag a panel away from the docked position to keep it open.

How do I connect my HP Officejet 6600/6700 to my IMac using Moutain Lion? I downloaded the driver. the printer works but I can't scan. Any recommendation?

I downloaded the driver from the apple sit. the printer works but I can't scan. It says I need to enable the scanner. Any recommendation?

I would suggest asking HP, but have you tried scanning with Image Capture or with the Scan utility in Print & Scan system prefs?

How can I color a black and white imported jpeg?

I am new to Illustrator, and have been watching MANY videos, but just cannot seem to figure out how to color the B&W photo I imported into Illustrator CC. Do I need to do something in Photoshop first? Am I missing a step? I was able to trace the image but from there I am lost. Any suggestions are greatly appreciated!

How can I color a black and white imported jpeg?
In case you don't want to trace it first:
-> it needs to real Greyscale. Not just desaturated RGB
-> Do not save it via Save for Web in Photoshop.

How can I make photos Black and White?

I took a few pics using photo booth on my mac. How can I make them black and white after the picture was already taken? Thanks! (I have the most updated OS X)

Go into iPhoto's edit mode and click on the Effects button at the top. Then select the B/W option in those that are listed.
OT

Can I desaturate to Black and white but retain one colour??????????

Hi there,
I'm trying to get a desaturated effect on a sequence that gently fades from full colour to Black and white over the course of a minute. My question is: Can I retain one colour (ala rumble fish or Schindlers list) whilst everything else turns to black and white? I want the colour red to be retained. Anyone know an easy(ish) solution?
Thanks in Advance

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Can't import Scanned Black and white photos to iphoto

Issue : When importing a *Scanned, Black and white, jPG* image to iphoto get an error message
Error message stats " The following file could not be imported. (The file is in an unrecognized format.)
Solution: Im not an expert but I think it's the scanner driver and the color profile it uses. Changing the color setting to RGB or color or changing the file type from JPG to Tiff may help. If you have already scanned the photos or if changing the settings do not help the follow the instructions to fix the photos.
1. Locate the Remove.app Script
Location is : Macintosh HD - Library folder - Colorsync Folder - Scripts folder- Remove script
2. Select all of the photos and drag and drop the photos on top of the Remove script. The photos will immediately be ready to import to iphoto and will still be the same location they where dragged from.
Tip: place the photos in a folder on the desktop then select all ( command-A ) the photos with the issue. This may make it easier to drag and drop onto the Remove script

Gail:
Welcome to the Apple Discussions. The reason you're getting that black thumbnail and full sized image is that iPhoto does not support the grayscale profile Dot Gain 20% that grayscale scanning embeds in those photos. You're best bet is to scan them as color. They will still look the same but have the RGB color mode and sRGB color profile that iPhoto can support.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How can I create a black and white table for Write BMP File.vi?

I just want to create a black and white array to create the picture in B'n W

You can use this VI, which outputs an 8-bit Greyscale Color Table.
Good luck,
Jim
Attachments:
8-bit_Greyscale_Color_Table.vi ‏11 KB

How can I create a black and white image similar to what I see in the "Replace Color" tool?

Hi all, I'm just wondering how I can create a black and white image similar to what I see in the preview window of the "Replace Color" tool. See attached screenshot for clarification -- I need the grass to be black while the soil is white or vice versa. Any tips?

One way is to use Select>Color Range
Make a new Color Fill Layer>White
(Layer>New Fill Layer>Solid Color)
Put a new color fill layer below>black
Just invert the layer mask on the top fill layer for the opposite effect.

Memory died, replaced but now can't print with apple apps

User installable memory died, kernel failures, finally froze, replaced, all better but had to use Diskwarrior to clean up mess on hard drive. Now everything works BUT I can't print from Apple apps. MSOffice updated and prints, Safari, appleworks etc. don't all crash when printing. Cleaned out Printing PPD's, printer defs in Library, reinstalled printers from scratch, disk repair, etc. Even rezapped PRAM again. No luck.
Seems like this is tied to an apple OS function I haven't found yet.
Anybody got any ideas before I reinstall the OS?
thanks

Thanks Greg,
Well, bottom line, had to nuke the HD and reinstall the entire system. Everything is fine. Seems the archive and install couldn't deal with the degree of disk confusion caused from the declining memory prior to failure.
thanks

How to print a selection of pages from a 3000 page PDF without having to scroll two wheels! Also is there a way to set printer options for just black and white? Seems like there is a lot missing here?

I have been using this for school work as much as possible and have come across a problem. With my lack of knowledge for apple it seems as though I can't navigate myself to a easy answer. The problem hits when I am printing pages off of a large document, and I don't want to print the entire document in color but I have no way "that I can find" for a black and white print option...
----- also a larger issue, when printing I need to select 1 page or even 20 pages... The time it takes to use a scroll wheel and the fact if you try and scroll fast sometimes you click off the screen then you have to start scrolling all over again... It seems like you would beagle to input from say page 1224 to 1236.... Instead I have a scroll a wheel? Just doesn't make sense...?
Can someone please help solve this for me!

Yes, that fixed it, thanks! I had no idea they clashed like that. I ruthlessly purged all other tables of contents, and then used Layout > Table of Contents to create a new one, and it worked.
It made more sense after seeing in this thread that table of contents styles are more like presets or entities than styles.

Setting Black and White as the default when printing to a Canon Image Class 4080i

Hi,
I've got two Canon Image Class 4080i's that we are printing to at the school I work at. I have installed the Canon UFRII V2.40 Printer Driver for Mac OS X and we are able to print to them fine through any macbook running 10.5 to 10.7. My question is, how do I make the default printer setting be Black and White instead of color? I know how to change it from Color to Black and White by navigating to the Quality menu through the Print screen but I have to do this every time I print. Is there a way to make black and white the default?
Thanks in advance,
Cheryll

You’re really going to take photos straight out of camera on a 5d3 and print them with a blindly applied B&W conversion from the printer? I would highly discourage that, but if that’s what you want to do I’m sure it’s possible. Sorry, I have no experience with that printer so I can’t help.
Do you have a laptop? My recommendation would be to use a photo processing software like Lightroom (if you don’t have it LR5 is ridiculously cheap right now), play around before the event to get a B&W conversion that you like – even the preset ones are going to be better than whatever conversion the printer does - and then print from LR. It’d hardly take any extra time, and you could get a brief review of the conversions on a laptop screen before printing.

PSC 1510 All in one printer - won't print even black and white when colour cartridge not recognised

My PSC 1510 All in one printer is flashing the "check printer cartrige icon" and both "Black" and "Colour" icons at the bottom left of the printer.
It won't print at all, even when I select grayscale (black and white). The help pages tell me that if I remove the colour cartridge the printer will switch to backup mode and I'll still be able to print in black and white (though not copy or scan). But this is not the case, and I can find no way of switching manually to backup mode. The help pages have no useful explanation of backup mode. I've also tried cleaning the cartridge (which I'm pretty sure isn't empty) but that makes no difference.
Can anyone help? I'd be very grateful.

gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here). Clean the cartridge contascts as shown here. If that fails and the cartridge is an original HP then check the warranty date as shown here. If the cartridge is in warranty return it to your dealer for a warranty replacement.
The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed. I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printing in Black and White Only

Recently I've been having problems printing in color while using Adobe XI. When I print off of Office it prints in color just fine, but whenever I try to print off a PDF, it comes out as black and white. I've tried restarting my computer, re-installing Adobe, re-installing my driver software for the printer, I made sure the grey scale box was not checked, I made it so the printer determines the colors (by going into advanced settings), and I tried to "print as image". Nothing works! Please help.

Hi cassandrae9454197,
You might check for Adobe Reader Updates and ensure using the latest version i.e. 11.0.10
Also, let me know if Adobe PDF is set as your default printer or not.
What is your OS version?
Hope to hear from you.
Regards,
Anubha

Credit card statement printing in color when black and white chosen. Wasting INK! Not a printer problem.

I have tried to print my business cc statement 3 times and even though I have my printer default to black and white and I verified that in the print dialog box it still printed in color three times. I called printer company - no problems with that....I called cc company to see if they had a special down load issue - not problems with that. They open in Adobe as a pdf so it must be that. I saved it and tried to print it and it DID print correctly then. But, I do not want to have to save the statement each time. I have never had this issue before. Printer is only a couple months old. Programs are all up to date.

Hi Pat,
It seems to be happening only in Google Chrome. And it has happened with other sites, too, when downloading something to print. I attached a screen shot. As you can see, it shows black and white for printing but it still printed in color.
Are there setting in Chrome that I can't seem to find? Thanks for your input.

HT204135 my printer works but i can t print in black and white

Similar Messages

Maybe you are looking for