HT204135 OK loaded the apple SW for Mountain lion for my HP 2840 Color Laserjet...nothing happens when I send a simple two word page. In preferences it shows this printer to be default...I have no other printers on the Mac. Any ideas?
Attempting to install a HP 2840 Color LaserJet printer on my Mac Pro using Mountain Lion 10.8.2. Go to print a simple word doc with two words...Printer does nothing and stil says READY. The printer is listed in prefernces as default.
How can I get the printer to respond?
I have the same Issus.
Since the latest Printer Driver Update the Printing is very very very Slow. An PDF Dokument with only Text needs about 4 Minutes to print.
Regards
Florian
Similar Messages
-
Today tring to send email and it just sits there and thinks.... can receive email but not send even a two word message ..any ideas ???
Check your connections with Mail->Window->Connection Doctor
-
I switched to mountain lion and from Acrobat pro 9 to 10. now safari will not open pdf files. acrobat preferences says it is trying to use version9 to open and i removed version 9. any ideas?
Make sure you have updated Acrobat X to the latest version 10.1.3. They updated the PDF plug-in in 10.1.1: http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_ 10.1.1.pdf#page=4
-
I am trying to connect to apple support and it keeps asking me to put in the SN of my MAC and when i do it says that the SN is invalid I am putting in the SN from about this mac and it is the same as the one on the bottom of the MAC any ideas ?
Did you purchase this product direct from Apple online, in an Apple Store, or through a third-party authorized reseller? Or did you buy it from an original owner whose Applecare plan was supposed to be transitioned to a new owner, by them?
Do you have an original shipping carton the unit arrived in?
If the product was a retail 'open carton' purchase and no
back-track is possible, contact the reseller.
And if the computer had seen a major service with logic
board replaced, etc, it may have other issues with serial
number vs one they may have assigned it. Usually a
new logic board may have the SN flashed or if a unit
was determined to be a reman, a new # assigned. But
that would appear in System Profiler, if officially reman.
If you registered a product anywhere with Apple, it would show on a web page along with its serial numbers, going back several years, at this page after you log in there.
https://getsupport.apple.com/GetproductgroupList.action
A blue text with triangle See all products and services opens an Apple ID
sign-in window, then the page changes to show your items & info about them.
If you run the serial number through online Lookup, what appears?
http://www.powerbookmedic.com/identify-mac-serial.php
Not sure if this helps, 'your product' should appear - if registered.
Good luck & happy computing! -
I block pop ups except for allowed sites, but on the allowed sites, the pop up windows don't appear unless I use Exposé, then when I click on the one in Exposé, it just returns to the open Firefox browser.
Hi Tracy,
I don't suspect Malware yet, Id guess Disk corruption or failing Hard Drive with Files not found.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?
Ah!
Factuur Bright x
part of errors:
Process: Factuur Bright X [1476]
Path: /Applications/Factuur Bright X/Factuur Bright X.app/Contents/MacOS/Factuur Bright X
Identifier: ???
Version: ??? (2.0.0b20)
Code Type: X86 (Native)
Parent Process: launchd [184]
User ID: 501
Date/Time: 2013-07-10 22:35:39.180 +0200
OS Version: Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report: 2118 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 24 sec
Per-App Crashes Since Last Report: 1
Anonymous UUID: 47D641A2-4625-7590-369C-8BAFE1439551
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000010 -
I have purchased two audiobooks from iTunes. They play perfectly for about 13 minutes and then abruptly stop. I have purchased other audiobooks and have not had a problem. Please, any ideas on why this is happening and what can I do to fix it. Thanks!
As long as you use your computer like King Penguin stated for Report a Problem, you should be fine. If you can't get to your computer, are not using your computer, or your computer is not longer in the mix since you have been using your iPad, email iTunes support about the problem.
http://www.apple.com/emea/support/itunes/contact.html -
I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.
Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update. -
Keyword search in Apple Notes on Mountain Lion?
Hi friends. I hope someone can enlighten me and help put some faith back into Apple's software development.
Does anyone know how to do a keyword search in Apple Notes on Mountain Lion?? I know that sounds completely stupid but let me explain...
In the top left corner there is a search field. When I enter a keyword it searches all the notes, and in the left hand pain it filters the notes that have the keyword in them. It doesn't actually show me *where" the keyword appears, it only shows the notes that *contain* them. It's just a filter, not a search. Try it for yourself.
It would be like doing a keyword search in a PDF, and it only tell you which pages it appears on, rather than where on the page. It is completely useless.
I fail to believe the program would be this limited. Can anyone tell me what I am doing wrong? Please no suggestions to go find another note program. I need notes for particular reasons.This behavior makes complete sense to me. If I designed it, I would do it exactly the same way.
Here's why: Notes are not expected to be treatises. They are expected to be reasonably short. You should easily be able to find the search target in your relatively brief note.
Nonetheless, if you fee like you'd like to ask Apple for this feature, here's how to supply feedback to Apple:
http://www.apple.com/feedback/ -
My messages on OS mountain lion are apperaring all blank and its not allowing me to send any Imessages, it will let me type it and as soon as i hit enter it disappears somewhere. I have updated my software and this hasn't helped! Thanks
what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke. Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that. Your Mac Pro won't quit working if it isn't installed. From what I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
John B -
CS Upgrade With Apple iMac OSX Mountain Lion
Does any one know if Adobe has a software download patch to be able to use Photoshop CS Upgrade with a new Apple iMac OSX Mountain Lion please?
I checked and mine is an iMac8,1.
When I tried downloading Yosemite it looked as if it started, but then... nothing... I tried several times, to no avail.
I just called Apple and they said downloading Mountain Lion should work. Ordered online, paid my $21 and am now waiting for the download code.
Hope this works. I'm not very computer savvy at all. -
I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab
Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!
-
I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks
You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio. -
I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.
Are you using the Office for Mac 2011 version, as you need to do? The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
Hope this helps
Maybe you are looking for
-
Hi All, I am generating a map request to get a legend in PDF format as follows. <?xml version="1.0" standalone="yes"?><map_request datasource="MYDATASOURCE" format="PDF_STREAM" width="1188" height="840" antialiase="true" srid="8292"><legend bgstyle="
-
i have some sql query to execute. so i save the query in a stored procedure. the stored procedure has no param. my query is like this: create procedure [proc1] as select ... into #temp1 ... select ... into #temp2 ... select ... into #temp3 from #temp
-
Change language on premier pro cc
hw can i change language from spanish to english
-
I am attempting to port an application designed for the web onto the Brew SDK 3.1 I have successfully managed to run various Hello World apps. which I have put together but when I publish the more complex application and try to start it in the simula
-
Creating a bridge with airport extreme (base) and airport express
i am having trouble creating a bridge with airport extreme (base) and airport express. i got the airport express to connect to my network. Airtunes sees it fine. i have an iMac (running Tiger) connected to the airport express via ethernet which i was