HT204144 control panel need to be open to use airdrop?

hi, every time I want to send a file with airdrop, did I need to ask to my friend to open their control center?
because I don't see them until they open it.

Actually, we want both...
Most of the time, SSO is desired, but when testing role changes etc we need to be able to log on with a test user.
The desired scenario:
When you try to run a web report/query and have not logged on, the system should offer you two options:
1) Manual log on
2) Single sign on
If you wait for a specified time (say 3 seconds) without selecting an option then SSO is used automatically (to avoid having to select SSO every time you need it).
If you click manual log on then you should be prompted for a username/password and be logged on as the specified user.
Can this be done at all?
Kind regards
/Kenneth

Similar Messages

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Recon 3d Control Panel needs 30 seconds to start

I've bought the Recon 3d PCIe. My operating system is windows7.
My problem: when I click on the Control Panel Symbol it need about 30 seconds to start. I've the latest driver update. I tried a new clean installation but got the same problem.
I there anyone else with this problem ?
Greetings

Originally Posted by juettnla
I've bought the Recon 3d PCIe. My operating system is windows7.
My problem: when I click on the Control Panel Symbol it need about 30 seconds to start. I've the latest driver update. I tried a new clean installation but got the same problem.
I there anyone else with this problem ?
Greetings
Same here, but it only happens when it's first opening of CP, other times it opens fast.

MSI Clock & Information Tabs In Control Panel\Display do not open

I can't open the MSI Information tab and the MSI Clock tab in Control Panel\Display; keep getting the message that "an error occured while trying to run shell32.dll, control-rundll C:\Windows\system32\desk.cpl, display". Other than this, everything else is working perfectly. Any suggestions?

I would also recommend a 3rd party solution. On my 845PE with a GEForce3 Ti200 (MS8851), the system will reboot becuase of drivers problems (XP Pro) when accessing advanced page if I use the MSI controls.
Remoing the controls solves the issue.

Sound Blaster z control panel slow to start slow to use

I have recently fitted the Sound Blaster z sound card to my PC. The motherboard is an a Gigabyte X58 OC.
The soundcard is working well and sounds great. However the Sound Blaster Z-Series control panel takes an age to start up, literally minutes. It works OK once it has started up although it takes a devil of a time to switch to the CrystalVoice, Cinematic or Mixer tabs, again minutes. The other tabs are fine though.
My X58 motherboard has four PCI express 2.0 slots configured
x16_1
x8_1
x16_2
x8_2
There are NO PCI express x1 or x4 slots.
A graphics card is connected to the x16_1 slot. The sound card is connected to the x8_2 slot. The other two slots are empty. I have googled the issue and am led to believe the software is behaving like this because the sound card is not connected to a PCI express x1 or x4 slot. But why is is? I have tested the x16_2 and x8_2 slots with an Intel NIC x1 and that works fine. As the soundcard is working fine this would seem to be an issue with the software rather than the hardware. Is there anyway to fix this? Luckily this is not a showstopper as I don't need to use the software regularly but nevertheless surely Creative would expect to do better.

I hate replying to my own threads but as no help has been forthcoming, this information may of use to others....
What I have found out is that x16 or x8 PCI express slots are connected to the X58 IOH northbridge chip. x1 PCI express slots are connected to the ICH10/ICH10R southbridge chip.
I am guessing this difference is why the Soundblaster Z-series control panel software works with x1 slots and only very slowly with the x16 /x8 slots. It is unfortunate I have a motherboard only with PCI express slots connected to the ICH10 ICH10R chip.
Of course why the software can't work properly with the X58 IOH Northbrige chip, only Creative can answer. It would be nice to hear from Creative and even nicer of they could fix the control panel software!

Windows explorer crashed when I try to open control panel

I have a Linx 10 tablet with windows 8.1 installed. my daughter downloaded a fake chrome installer and when she tried to install it nothing happened (apparently). I installed AVG 15 and it immediately detected a load of files infected with a
virus which it removed. Now I cannot open the control panel. The window opens but is empty and then it hangs and I can only close the window by using task manager. I tried to perform a system recovery (Full factory reset) using the recovery
utility but it just sits there preparing. I have tried to open a number of control panel utilities nut they either don't run or open a window the same as control panel and can only be closed by using task manager.
I suspect that some of the files infected were system files used by windows as some of them were dll files.
Any suggestions?

Hi,
Since this problem caused by virus infection, first of all, we need to use anti-virus software scan your system to make sure the virus were killed.
Secondly, to fix this problem, you can try to use SFC /scannow
command to fix system componments dll files lost or corrupt.
If no use, try to use DISM /Online /Cleanup-Image /RestoreHealth
instead for test.
Roger Lu
TechNet Community Support

I've installed elements 12 but it won't open it's asking for the exe file but all it does when located is install again. I can't uninstall as it isn't present in control panel

I've installed elements 12 but it won't open it's asking for the exe file but all it does when located is install again. I can't uninstall as it isn't present in control panel. When I open properties it asks to locate the exe or the other options don't work the target is invalid

Hi sambanyc,
What version of Adobe Reader have you installed on your Mac?
Please try installing on a different Admin user account and check if that makes a difference.
Regards,
Rave

ICloud Control Panel will not install! What do I need to do?

I have tried running the installer but it fails with the following error message:
"Could not update the ini file C:\Windows\system32\mapisvc.inf."
What is going wrong & what do I need to do to install iCloud Control Panel?
N.B. I am using a laptop with Windows Vista installed, with Service Pack 2. I have also installed ALL updates.
Does it have anything to do with the fact I don't use MSOffice?
Thanks for your help

1. You need to disable the User Account Control (AUC) in Windows control pannels, otherwise next steps may not work.
2. You need to locate the file, right click it and select properties - security - advanced - owner tab; click on edit and select your username (the current Windows account), press ok.
3. Then within the security tab, select your user account and grant the full control to yourself (first box needs to be ticked). Press ok.
Then try the installation again. This worked for me.

Virtu Control Panel stuck in Trial Mode

Hi,
I’ve built a system based around an MSI Z68A-GD55 (G3) motherboard, Intel Core i5-2500K processor and MSI GTX 570 TwinFrozR graphics card. Upon installing Windows 7 x64 Home Premium I installed all the appropriate drivers and the Virtu Control Panel. When I open the Virtu Control Panel it is always stuck in Trial/Evaluation mode so I can’t edit the OSD settings, Add a custom application, Edit an existing application or delete and application entry. I have tried uninstalling and reinstalling the Virtu Control Panel and downloading the driver directly from the LucidLogix.com website, each time with the same result. I’ve also tried putting my motherboard in i-Mode and d-Mode, each time with no change (with the exception of the Application list changing in d-Mode) – I’ve also tried disabling and re-enabling Lucid Virtu support on the motherboard.
Also, there is a file called lucid.log on my C: drive containing the following:
TID:1852, 10/07/11, 10:54:00, LicenseData.cpp:184 - Warning code: 0
TID:1852, 10/07/11, 10:54:00, LicenseData.cpp:184 - Condition: ret, can't find SoftKey.txt in current dir (maybe it's ok and there is not SoftKey, will check bios)
Any ideas guys?
My complete system specification is as follows:
Motherboard: MSI Z68A-GD55-G3
Motherboard Driver: Intel Chipset Driver 9.2.0.1030
Motherboard Chipset: Intel Z68
Motherboard BIOS: 23.2
CPU: Intel Core i5-2500K 3.30GHz
Memory: Corsair XMS3 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel
Memory Latency: 9-9-9-24
PSU: Antec TruePower New Modular 750W
Graphics: MSI GeForce GTX 570 OC Twin FrozR III Power Edition
Graphics Driver: NVIDIA 280.26 WHLQ
Sound Card: Creative X-Fi Xtreme Music
Sound Driver: 2.18.0015
Operating system: Windows 7 Home Premium x64
Thanks,
Kona
Edit: I've just found this in the Virtu Control Panel install guide, do you think it can't find the Lucid BIOS Certificate on my motherboard? What could cause this?
- This version is a production version and will have no time or functional limitations if motherboard has the approved Lucid BIOS production certificate installed.
- If motherboard does not have Lucid BIOS certificate or a certificate is not approved for current software package, this version will stop working in 30 days after installation and also display the product logo of different sizes in different locations of the screen during runtime. Adding/editing arbitrary application to the support list will be disabled.
Edit 2: I've read the other threads of people with this issue, and by the looks of it I need to wait for MSI to release a BIOS update - to me this isn't acceptable to release a motherboard with a completely gimped feature, when it's advertised as a feature of the board. I've already submitted a support case, what do you think the likelyhood of MSI sorting this out within the next week?

Quote from: Svet on 08-October-11, 02:01:08
Remove current Virtu Control Panel/Driver & software with "Your Uninstaller!":
http://www.ursoftware.com/download.php
[which removes any registry entries and files that can be left assotiated with corespond sofware]
when its done, reboot machine and then install the Virtu from msi web again:
http://www.msi.com/service/download/driver-17057.html
Hi Svet,
Thanks for your reply.
I've done as you requested (although I will point out that Your Uninstaller contains a Toolbar which is flagged as Spyware...) and uninstalled Virtu with Your Uninstaller:
And then I re-installed the version of Virtu Control Centre from your link (it's the same as I downloaded earlier but I re-downloaded it to be sure...), and exactly the same happens:
HU16E, I think your correct. Reading the other issues with the missing Certificate/License on the BIOS has plagued a few other MSI motherboards but has been fixed with BIOS updates - I've submitted a support request to MSI but haven't heard anything back yet. I can't beleive they can/would miss something like this out, it's an integral feature of the Z68 chipset!
I might see if the retailer I bought it from will accept it back for a refund, I'll either get an ASUS or the GD80, unless someone can suggest anything else or MSI come up with a BIOS update sharpish!

I can not sign in to iCloud from the control panel on my PC

I just purchased the New iPad and decided to do the iCloud sync. I have installed the iCloud control panel to my Windows 7 Pro computer, but when I try to sign in from the control panel it doesn't log-in. I have waited for an hour to see if anything would happen and it does not. I have even tried to reinstall. Does anyone have any ideas?

I was having same issue here (using windows 7 64-bit). iCloud control panel used to work fine for me before this last update, but then it stopped letting me sign in. After entering apple id and password, just hangs with the spinning progress wheel forever..
I tried uninstalling, rebooting, and then reinstalling the control panel, but still did the same thing. I also tried changing my iCloud password; new password worked fine for signing onto icloud.com and from my iPhone 4S but still not from the control panel. The strange part was let it would let me log into it with my wife's apple id ??
That got me experimenting some more and I realized that the control panel worked fine from a different user profile on my windows computer! After experimenting and nosing around in my profiles 'AppData' folder, I managed to get it to work again:
If you have iCloud control panel log in window open, close it
Copy this path to your clipboard: C:\Users\%username%\AppData\Roaming\Apple Computer\Preferences
Goto start -> run
Paste the path and hit enter
From the folder that is opened, rename 'MobileMeAccounts.plist' out of the way (or you can delete it if want..)
Restart iCloud control panel and try logging on again. MobileMeAccounts.plist is regenerated the next time you sign out from control panel.
I'm guessing that somehow my (our) original MobileMeAccounts.plist has some sort of corruption in it, or maybe some log in attempt got hosed somehow and its preventing it from even trying? Who knows...
Hope it works out for you too!! ~~Corey

Icloud control panel installeras inte

Jag försöker installera icloud contol panel på min pc, men installationen lyckas inte. Får meddelande "Installer svarar inte". Provat flera gånger. Vad gör jag?

You can hack iCloud control panel to work on Windows XP to give you synced access to Contacts, Calenders, Reminders and Bookmarks. It also can be used to set up your me.com mail.
I found a solution here, have written it up in clearer english and added details re IMAP support for me.com addresses here:
http://xlii.be/s/1ii
In summary:
Requirements:
iTunes 5.10
Unpacking program e.g. 7-Zip or WinRar
Orca MSI editor
The iCloud setup hack for Windows XP:
Download iCloud Control Panel for Windows.
Open iCloudSetup.exe file with WinRar or 7-Zip and extract.
Navigate to and open the iCloud.msi or iCloud64.msi (for 64bit systems) with Orca.
In the left table select LaunchCondition. Then change in the right table “VersionNT> = 600” to “VersionNT> = 200” and Save.
Run modified iCloud.msi and install.
Run iCloud Control Panel, located in the Windows Control Panel, and set up as you want.
Have fun!

LYNC 2013 control panel error: this page cannot be displayed

Dear sir,
Now i am suffering with the lync 2013 control panel problem, i cannot open it and got the error "This page can't be displayed" as below screenshot shows,
I've tried some ways, but still same problem
1. Reflush the dns, checked the A record and SRV record of the FE are normally.
2. checked the IIS and also cannot find any problem.
3, reboot the FE server/IIS, and AD.
4. i can open the console page normally via web :https://localhost/cscp
5. i can ping the FE server domain name and return the right IP info.

Hi TECH-Tommy,
The certificate is under “Personal” store.
In addition, can you open the page via
https://admin.domain.com ?
Also please try to clear IE cache and treat the FQDNs for admin, pool or FE server name as trusted zone.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Sound Blaster ZXR Creative Audio Control panel

Hi. I bought a soundblaster ZXR. I uninstalled the driver for the old sound blaster X-Fi card, then shut off my computer and installed the ZXR card (which fits into a different slot than the X-Fi did), then restarted the computer and installed the software for the ZXR.
My situation is as follows: when I click on the Creative Audio Control panel, I get a message saying "The audio device supported by this application is not detected". I looked thru the internet and the general advice seems to be that the software for the older X-Fi card is not easily removed, and to remove it, I should uninstall the ZXR software, remove the ZXR card, re-install the old X-Fi card, then use some rather advanced techniques to make sure all of the software for the X-Fi card is uninstalled, then turn off the computer and take out the X-Fi card, then install the ZXR card, and re-install the software for the ZXR card. With some reluctance, I was about to do that, but then I noticed a folder called Sound Blaster Z Series was installed, so I opened it and clicked on Sound Blaster Z Series Control Panel, and a program opened up which allows me to make some changes to my sound set up.
My question is - When I click on the Creative Audio Control panel, am I supposed to get a message saying "The audio device supported by this application is not detected", because the Sound Blaster Z Series Control Panel is taking it's place? ...or does that error message tell me that there's something that I should address to avoid any future problems. I want to learn how to work with various sound programs, like sound forge, cakewalk, acid pro, kontakt, etc. and I want to start with a proper setup to help me avoid any unneeded frustrations. I have a fairly new computer with an ASUS P8H77 motherboard. Under Device Manager - Sound, Video and game controllers, I have the following entries:
High Definition Audio Device
Sound Blaster Audio Controller
Sound Blaster ZxR
Sound Blaster ZxR DBpro
I right clicked the High Definition Audio Device, then disabled it, but that didn't help so I enabled it again.
Thanks.

The Creative Audio Control Panel is a single entry leftover from your old X-FI. Uninstall just that. Then you can make a shortcut to the other you were speaking off and put that shortcut wherever you wish. I uninstalled an X-FI before and I had that control panel left over even after uninstalling what I thought was everything.

How to cancel print job with control panel on HP8610

Is there a way to cancel a print using the control panel of the HP8610 rather than using task manager?
This question was solved.
View Solution.

Welcome to the forums LucyRicky!
I understand you are looking to cancel print jobs with your Officejet 8610. I have found 2 guides for you to show you how to cancel them.
Windows: Cancel printing
Mac: Archived - Mac OS X: How to Delete Printers and Print Job Lists in the Print Center
I hope that helps resolve your question.
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

HT204144 control panel need to be open to use airdrop?

Similar Messages

Maybe you are looking for