HT204150 Contact will not display Thumbnails correctly or not at all. If picture is cropped in Contacts it might show in iCloud cropped but in Cont. only in full size

I drop and crop a picture from iPhoto into the address book thumbnail and it will show until it is synced with iCloud. Then it either disapears or reverts to original size. iCloud however,has the cropped picture. Taking pictures with the Facetime camera works without a problem.
System 10.8.1
MBP 13 inch

Hi,
I just wanted to add, that I see a similar problem consistently since 10.8 too.
Before 10.8 I did not use this feature.
What happens?
I take a Photo of someone with my iPhone 5, sync it through iPhoto and then use it through contacts.
If I need to crop the picture and align it a bit everything works perfectly, till the picture gets synced to iCloud.
Than the contacts thumbnail will be updated with a "damaged" version.
The width and hight of the cropped region is right, but at the wrong position (always left lower edge of the picture).
OS 10.10.1
MacBook Pro late 2013
iPhoto 9.6
Cheers, freeman

Similar Messages

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

.NRW files not displaying thumbnails in Bridge

.NRW RAW files from Nikon P7800 do not display thumbnails or metadata in Bridge. PsCC, Bridge and CR 8.3 are all showing as up to date on CC Desktop App. Files display correctly in Lr 5.3. Any suggestions ?

I have:
PhotoshopCC>Edit>Preferences>CameraRaw>8.3.0.141
BridgeCC>Edit>CameraRawPreferences>8.2.0.94
The computer found 6 files named Camera Raw.8bi. They are in pairs , two in the CS5 folder and two in the CS6 folder, two in the CC folder. One of each pair has >Program Files(x86)> The other one has >Program Files>.
When I go to C:\ Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats\ only one (Camera Raw.8bi) file shows. This was created on 18 March 2013 and modified on 3 December 2013.
If I go to C:\Program Files(x86)\Common Files\Adobe\Plug-Ins\CC\File Formats\ another (Camera Raw.8bi) file appears, created and modified same date and time as the first one.
Is this making any sense ? Thanks for your help.
It appears Bridge is using CR 8.2, the question is why and how do I persuade it to preference CR 8.3
By the way, I failed to mention it previously CR is converting and editing the NRW files normally, I just can't see their thumbnails in Bridge.

Firefox is not displaying the correct font color on my blog, but other browsers are.

I have a web designer issue. Firefox is not displaying the correct font color on the header in my blog. Explorer, Chrome, and Safari have no problems. The page is in css but this particular section has html code o designate color. The code is as follows:
<font face="helvetica" color="FF9966" size="1">blog</font>
Though all other browsers display the light orange color designated, Firefox displays white. Strangely, if if retype the code by spelling out a color, Firefox displays it correctly. i.e.
<font face="helvetica" color="black" size="1">blog</font>
... will give me black. You can see the effect by viewing the link below and looking at the word "blog" in the header, which should be light orange but is not in Firefox.

Actually it also seems to work in the current Firefox 4 beta as it is.
The code is not right though - the correct syntax for the color attribute with hex values is with a # at the start, so:
color="#FF9966"
It might work in Firefox 3.x if you change that.

Bridge CC not displaying thumbnail/preview large PSD (win7)

Hello!
Latest Bridge CC, will not display thumbnail or preview of many of my large (1.5-3gb) PSD files.
1) I have PURGED CACHE in Prefs
2) I've individual cleared cache for individual PSDs.
So, I just see the generic icon.
My only reason for even using Bridge is to visually select from my large PSD/TIFFS without having to open them first.
I'm pretty sure these same files previewd when I was running CS6 Bridge. Lightroom 5's import will show the preview.
Thanks

It was strange since the thumbnails work in CS5.1 and 6
Then you must have set them before to a larger amount, I believe the default is 1000 MB and has been so for as long as I can remember
But I'm not sure about the generic icon because usually it shows a low quality thumb with black border, like the ones you get when using 'Prefer embedded' as quality.

IPhoto6 - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored from time machine, rebuilt the library and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline.

iPhoto6 on iMac running SL - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored the library from time machine, rebuilt the library from iPhoto and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline instead of the thumbnails. Does anyone have any other ideas on how to restore the thumbnails?

Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
I'm running CS6 Production Premium with ALL updates installed on 10.6.8
I appreciate any input and help provided the input is provided by someone who either
A) knows the answer because they actually work for adobe
B) actually tried this themselves before attempting to provide a solution
If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

We are all just incompetent users here. As pointed out before this is just a user to user forum, Adobe rarely checks in.
I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

Why is Mavericks Calendar not displaying numbers correctly?

My Calendar application is not displaying numbers correctly, I have tried validating my fonts and found nothing there, so not sure what the problem is...

Have yopu gone to Font Book
Font Book is located in the Applications folder (in the Finder, choose Go > Applications). To manage or view fonts, open Font Book, or double-click a font file.
High Light all the fonts ( Shift and click 1st one Shift and click last one) and
then select File/Falidate Fonts
Then making sure all the fonts get a green tick box.

Why is Preview not displaying fonts correctly?

Since the last Snow Leopard upgrade, Preview is not displaying some fonts correctly. I checked to see if the fonts were embedded in the PDF (by resorting to Adobe Acrobat 5... which is not displaying them correctly either) and they are True Type with Windows encoding which as far as I know Preview OS X should be able to handle.
I tried deleting the Preview preferences in User/Library/Prefeerences and restarting but this made no difference. The same PDF works perfectly though on an old iMac that is running OS X Tiger!!!

Well I found a few minor font problems which seem to have cropped up since the last system upgrade, but none of those were the font in question. Also, as I understand it, the whole point of PDF documents is that the fonts are embedded in the document so you do not have to have the fonts installed on your computer to view the PDF properly. I use a lot of special fonts and when I save documents as a PDF I can send them to anyone on the internet and they can usually see everything as it is meant to be.

Design Window is not displaying the correct view

Hi
For some reason the Design View on my CS3 is not displaying
the correct view.
It used to show how the web page would look but it is simply
showing up the wording and pictures surrounded by dotted black
lines.
I am using a template as a bases for all the pages and all
the pages are showing like this.
My other sites are showing up OK though.
When I Preview in Browser, it all shows up OK.
Can anyone help?
Bezz

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Bezz333" <[email protected]> wrote in
message
news:fttdsr$394$[email protected]..
> Hi
>
> For some reason the Design View on my CS3 is not
displaying the correct
> view.
>
> It used to show how the web page would look but it is
simply showing up
> the
> wording and pictures surrounded by dotted black lines.
>
> I am using a template as a bases for all the pages and
all the pages are
> showing like this.
>
> My other sites are showing up OK though.
>
> When I Preview in Browser, it all shows up OK.
>
> Can anyone help?
>
> Bezz
>

Server Admin not displaying groups correctly

Server 10.5.8, Mac Pro 4 core 2.66, 56 GB RAM.
Had a crash yesterday, all back to normal now except:
Server Admin's "show users and groups" is not displaying groups correctly" "users" is missng, and any new groups I created in WM are missing. Even if I sort by GID, they don't show up. And yet, if I type "staff" in the search bar, it shows up with GID 20. Also shared folders are showing up as groups

Surely someone can at least point me in the right direction? I tried rebuilding the LDAP database, but that didn't fix it.

TS3274 My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
According to Fly150 in another discussion, this is a workaround - for the time being.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store.

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

Greetings;
This seems to an ongoing issue (see related discussion link). We've been experiencing the same update lag since last Friday. The new additions to the Collection appear and are accessible in both the iPad and iPhone applications, but even though they additions appear in "Quick View", the material doesn't appear in the Collection itself. Apple is aware of the issue and is investigating. All the best...
Syd Rodocker
Tennessee State Department of Education
https://discussions.apple.com/message/15461971#15461971

HT201302 my iphone 5 will not turn on. i want to save all my pictures and videos to my laptop but i cannot do it as my iphone will not switch on. how do i get them?

my iphone 5 will not turn on. i want to save all my pictures and videos to my laptop but i cannot do it as my iphone will not switch on. how do i get them?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searc

Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
Robert

Huh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing.

HT204150 Contact will not display Thumbnails correctly or not at all. If picture is cropped in Contacts it might show in iCloud cropped but in Cont. only in full size

Similar Messages

Maybe you are looking for