HT204150 using iMac dvd drive to install software in macbook air

How do I do it?
Where will answer be poster. Please email at [email protected]

iCloud doesn't come into it. You can share the DVD drive on one Mac with another Mac which doesn't have one, for certain types of optical disks (for example you can't do this with movie DVDs or install disks for an operating system). You can probably do this with the PE installed, though I've never tried this.
Please see this page:
http://support.apple.com/kb/HT5287

Similar Messages

  • How to use mac cd/dvd drive to install software on pc

    My PC's dvd drive went bad. I need to install software from a dvd, is there a way to use my Macbook Pro dvd drive to install the software on the windows laptop?

    If your PC is a desktop, and you intend to still use the PC for a while ...
    I would do this ...
    Use it as an excuse to get a BluRayread/DVDRW/DL.  Lets you play BluRay and extends the "useful life" of the PC.
    Or make it an external USB BluRay ...
    eww ...
    What are the rumblings about MBP using external BluRay?
    For the record, iLS6, this is "turning lemons into lemonade"

  • Installing software on Macbook Air using Apple superdrive

    The Apple superdrive I have will not install Office:mac 2011 or iWorks on my new Macbook Air. It plays DVDs without problems but when I installed software discs the icons show but nothing further happens.

    Wondering if anyone can advise me on where I'm going wrong..
    I've tried to install Windows XP Professional with service pack 2 (original disk) on my Macbook Air, with SuperDrive, but keep on getting this message after the first part of the installation is complete: "Disk error, Press any key to restart" (pressed any key but wouldn't do anything).
    Here is what I have tried:
    1. Opened Boot Camp and split the partition in half (even tried 32GB)
    2. After this process is complete, Boot Camp asks to insert the Windows CD, did this and pressed OK.
    3. The system rebooted in Windows Installer
    4. Asks where I want to install Windows, I selected C:/ (BOOT CAMP) FAT32
    5. Copies all of the Windows setup files
    6. Then tells you the system will restart after 20 or so seconds, and if you want to restart press ENTER
    7. The system restarts, but in Mac OSX. I've then tried the whole process again, and when it restarts I hold down the Option key.
    8. A boot menu appears giving 3 options: 1. Mac OS, 2. Windows, 3. Windows CD
    9. I select Windows CD (also have tried Windows)
    10. Blank screen appears and says: Press any key to boot from CD....
    11. I dont press anything then the message appears: "Disk error, Press any key to restart"
    Can anyone help me to solve this please?
    Thanks in advance.

  • Need to install software to MacBook Air

    Hi,  I need to install CS3 (already installed in my MacBook Pro) into my MacBook Air but I don't have a CD drive.  Any solution please....

    Click here for information.
    (75538)

  • Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

    can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

    Note: These types of discs or activities are not supported by DVD or CD sharing:
    DVD movies.
    Audio CDs.
    Copy protected discs such as game discs.
    Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
    Burn a CD or DVD

  • Can I use the DVD drive on a PC to install software on my macbook air air

    Can I use the DVD drive on a PC to install software on my macbook air

    Yes, it's possible.
    MacBook Air, Mac mini- How to use Remote Disc to share DVDs or CDs from a Mac or Windows-based compu…
    Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks

  • I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    All,
    A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
    Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
    The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
    Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
    So happy to be done w/this one!
    Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
    TC

  • How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

    How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

    I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
    Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    that's a step by step walkthrough.

  • How can I use a remote CD/DVD drive to install MacOS 10.4?

    Hello,
    My old iBook G3 needs to be updated to MacOS 10.4 however its CD drive doesn't work. I have an retail copy of Tiger and have put it in my iBook G4 but when I open the installer it doesn't allow me to choose my mounted iBook G3 (which I have connected through a wireless network). How can I use my iBook G4's CD/DVD drive to install MacOS 10.4 on my iBook G3?
    Any help would be appreciated.
    iBook G4 Mac OS X (10.4.6)

    'Making matters worse' seems a bit excessive, since it isn't that uncommon for an optical drive to die in an otherwise perfectly good machine. (Ask parents with inquisitive kids, for example!
    Plus, this is an iBook, & I don't believe OWC sells replacement internal drives for them, only for PowerBooks, so it doesn't seem that unreasonable to suggest that he first try something that has a good chance of doing what he wants to do, which is install Tiger on the iBook, rather than suggest anything that may or may not be appropriate for his situation.
    Since he already has purchased the DVD, the most he is risking with the TDM approach is the cost of a 6 pin to 6 pin FW cable, which he still should find useful no matter what else he decides to do. If nothing else, it shouldn't cost anymore than the exchange of the DVD for CD's, right?

  • How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.

    How can I get *computer* to use external DVD drive? (1.8 GHz PowerPC G5 Version 10.3.9)

    Place cd/dvd in drive.  cd/dvd icon will show on desktop.
    How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.
    What is ude?
    How is it connected?  firewire or usb?
    When connected it should appear in system profiler.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    look for firewire or usb.
    Robert

  • Can I use my DVD Drive from my pc to load Tiger on my Mac

    Can I use my DVD Drive From my pc (compaq R4000)to load Tiger onto my Mac G3 Blue & White?

    The short answer is no
    long answer is maybe but if you manage to get a DVD drive from a Compaq into a G3 then install Tiger it will be so slow (Tiger on a G3 iMac) it'll bring tears to your eyes.
    What are talking about this sloww nonsense! I've been using Tiger since it came out on my Summer 01' 'Snow' iMac 500Mhz and it works quite nicely! Sure garageband is sssllooww but who needs it. Everything elese is good! Just bump up the ram and your good to go as long as the processor is 450Mhz or higher! Although after looking at your post, you were using OS 8.6 so I assume its a 233Mhz. So ya that would be slow...BUT I've found 10.2 Jaguar to work well with my Bondi 233Mhz with 192MB of Ram...

  • I have Works and Pages installed in my iMAC? I am wondering if I can use the same license installed in my MacBook Air?

    Hi there,
    I have Works and Pages installed in my iMAC? I am wondering if I can use the same license installed in my MacBook Air. Appreciate your help.

    HI Pam,
    You've posted this question in the AppleWorks community, meant for discussion of issues and techniques involving Apple's now discontinued productivity application, AppleWorks.
    The answer to your Pages question depends on how, and with which licence, you purchased iWork or Pages.
    If you:
    -Downloaded the thirty day trial of iWork, then purchased a registration number to activate it,
    OR
    -purchased and installed iWork from the boxed DVD retail package,
    then you purchased either a one user, one machine licence, and will need to either remove the iWork applications from your iMac when you install the package on the Air, or purchase a new copy of the individual applications you want and install them on the air.
    OR
    you purchased a Family Licence, which permits you to install and use iWork on up to five computers owned by members of the same family, living under the same roof.
    If you downloaded Pages (with or without the other iWork applications), then your licence permits you to download and install the application(s) on any compatible device attached to the same Mac app store ID as was the Mac on which it was originally installed.
    Regards,
    Barry

  • Can the iMac dvd drive read or accept mini-dvds/cds? thanks

    Can the iMac dvd drive read or accept minid-dvds/cds? Thanks

    Don't even attempt it. It won't work, and the disk will just get stuck in the drive's mechanism. If you want to use mini-disks, you'll need an external tray-loading optical drive.
    Regards.

  • IMac DVD Drive--Loud Noises

    Recently my iMac DVD drive has begun to make loud noises when a disc is inserted. The loud whirring, spinning, and clicking noises last for about a minute to two minutes before the DVD finally ejects (after many attempts). Nothing plays, the sounds just automatically start. I've read that lower quality/damaged discs can cause similar sounds, but I have used two different DVDs and get the same result when one has worked perfectly before. Is anyone aware of what the problem might be or how to fix it?
    Thank you!
    Christie

    AppleCare's Express Lane. Do note that if you're within 50 miles (80 KM) of an Apple repair station, they'll do the repair onsite.

  • Tecra M1 - can I use my DVD drive in an external case?

    Hi there,
    I had a Terca M1 laptop. Now I have another Toshiba laptop which bay is not compatible with the M1. So I can not use my "old" dvd drive on this new laptop.
    Is there any external slimcase accessory available to use my dvd drive as external usb?
    thanks
    HP

    Hi there,
    Thanks to all. I've checked ebay already. Maybe these products are not available in Germany. I'm located near frankfurt/m.
    I found only some "auctions" in UK with fixed price starting at 20 pounds or so. Nothing available in Germany at all! really exciting.
    It would be very nice if one of you could provide me some links to these real auctions you found. ebay and google found nothing.
    Thank you again
    HP

Maybe you are looking for

  • System freeze when trying to install 10.2 (Jaguar) on a biege G3

    I'm trying to install 10.2 on a partition on my G3 hard drive. The machine specs are: 400Mhz G3 384 Meg RAM OS9.2.2 ROM Id $77D.45F2 When I try to restart with the install CD, the machine freezes completely. The only way I've been able to recover is

  • Tx does not rollback in stateless ession bean

    I implemented three methods to test transaction functionality in stateless session bean. The methodA() execute an UPDATE sql command on database, the methodB() excute an INSERT sql command on database, and the methodC() just calls the methodA() and t

  • WHEN I TRY TO CROP A PHOTO MY IOS 5.1.1 8GB 963MB LEFT IPOD TOUCH 4 CRASHES!

    It crashes :(

  • Aperture 3.5 incorrectly the gray pipette works

    We choose a photo, we apply a mipetka, we receive nonsense. Before updating everything was as it should be. It is urgently necessary to do something. Выбираем фото, применяем мипетку, получаем ерунду. До обновления всё было в порядке. Срочно нужно чт

  • Question from a noob

    ok , so i want to ask      class NewAction implements ActionListener           public void actionPerformed(ActionEvent e)           TArea2.setDocument(new PlainDocument());      void confirmation()      int ReturnValue=JOptionPane.showConfirmDialog(n