HT204158 how to clean ipad smart cover

I got something a bit oily on the iPad smart cover. How do I clean it?

Leather or polly cover?
 Cheers, Tom

Similar Messages

  • How to clean ipad smart cover? plz answer?

    my cover is not a leather cover i want to know how to clean it

    I have one of the black synthetic covers for the original iPad.  After a year of use it looked pretty bad.  A search turned up no good results for cleaning.  Since the cover is made of some kind of synthetic material using chemicals or cleaning solutions is probably a bad idea.  Here is what worked for me.  First, take the iPad out of the cover!  Run warm water over the cover and gently scrub it with your bare hand.  Dry with paper towells.  You will note it still may feel damp.  Let it air dry for a while before replacing iPad.  I was amazed at how clean it came.  Looks like new. 

  • How to Clean Poly Smart Cover?

    My new (since last Tuesday) orange smart cover has a few tiny spots on the front where it touches the back of the ipad when it is open. The comes from my putting the ipad down on various counters/tables. It's not bad now, but I can imagine what it'll be like in six months. Anyone found anything to clean the poly material? I've tried damp cloth by itself and with a drop of liquid soap, neither of which leave more spots but they don't remove the ones that are there.

    Welcome to Apple Discussions!
    There's a Quilt Soap by Orvus (comes in a liquid or a paste) that I've used to get oils out of fabric BUT it works best with soaking. It has no harmful chemicals and you wouldn't have anything to lose by putting a drop or two in 8 oz of water and dabbing.
    Question: When you have the cover open, isn't it the gray inside that's touching the back of the iPad, not the orange outside?
    (Speaking just for myself, I just accept spots as part of the process and tell myself it adds character!)

  • How to clean Leather Smart Cover

    How to clean the leather cover

    I am using Armor All leather cleaner for cars.  Look in the automotive section of any Wal-Mart.

  • How do I clean an iPad Smart Cover ?

    My Smart Cover is dirty. What is the best way to clean it ?

    Cleaning an Ipad smart case, cover or any case in general is fairly simple if you know what products to use.  However if you get it wrong you could end up destroying your case or Ipad so be careful and always test on small conscipicous areas first. 
    PU leather and real leather require different techniques.  PU leather is much easier to clean.  A slightly damp micro fiber cloth should do the trick but never apply anything directly to the cover always lint free cloth first.  The rubber is also a nice trick I have not heard of until now. 
    If using leather you will need to use special leather treatment otherwise the leather could dry out and crack.  I recommend lexol but car cleaning leather wipes etc will also do the trick.  If cleaning micro fiber on the inside always use a soft brush. 
    If there is tougher dirt on the case you will have to use more aggressive techniques found on my web page  how to clean ipad smart case

  • How to clean the iPad Smart Cover(Leather)?

    how to clean the iPad Smart Cover(Leather)?

    For added protection, use wilsons leather cleaner/protector spray.  Makes it water proof and stain resistant.  Just did it to my tan cover and it worked great!

  • How to clean iPad mini retina red smart  Cover case

       Hi i need to know how to clean mi iPad mini retina red Smart Cover
    Thanks

    Hi Leemrt,
    Thanks for visiting Apple Support Communities.
    See this article for tips on cleaning your Apple products:
    How to clean Apple products
    http://support.apple.com/kb/ht3226
    iPad Smart Cover and Smart Case—polyurethane
    To clean your polyurethane iPad Smart Cover / Case, first remove it from the iPad. Use a soft, slightly damp, lint-free cloth. Wipe the front of the Smart Cover / Case and the inside with a soft, lint-free cloth to remove any dirt.
    Don't use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean the polyurethane Smart Cover / Case.
    iPad Smart Cover and Smart Case—leather
    The iPad leather cover/case is made from natural aniline leather. Its appearance will change as you use it. It may acquire a patina and may change color due to the oils from your skin and direct sunlight, further enhancing the natural look.
    Cleaning the leather may affect its color. If you choose to clean the leather, first remove the cover/case from your iPad. Use a clean cloth with warm water and mild hand soap to gently clean the leather. Wipe the outside and the inside with a soft, lint-free cloth to remove any dirt. You can also use a mild cleaner along with a dry clean cloth. Mild cleaners or conditioners may help remove some stains but may also change the color of the leather.
    Keep your iPad leather cover/case away from prolonged intense sunlight, heat, and humidity. Exposure to water, oil, makeup, and dyed materials (such as denim) can stain tanned leathers.
    All the best,
    Jeremy

  • HT204158 how do you fold an iPad smart cover to prop up the iPad?

    I have seen the iPad smart cover folded so that you can prop up the iPad to watch a movie.  How do you do that?

    You basically just "roll up" the cover. See the video included on this page:
    http://apple.wikia.com/wiki/Smart_Cover?file=IPad_2_Smart_Covers
    Regards.

  • IPad smart cover cannot come on

    my iPad smart cover connot stick together pleasget some instucions to put my smart cover on!!!!

    If you look at your Smart cover, there are 3 places where it's thinner to allow the cover to fold up and be used as a stand.  Since these parts don't touch the screen, the screen doesn't get cleaned right there.  If you remove the cover and fold it with the microfiber side facing out, you can wipe it across the screen for a complete cleaning.

  • IPad smart cover ripping at sides

    My iPad smart cover at the sides is breaking and separating. I lost the receipt will apple still give me a new one if I take it back With out the receipt?

    Mine has been good thank god, but I know with the smart cover they were having problems with the early ones. I read somewhere that people even without a receipt could go in for an exchange. You never know.

  • TS2634 iPad Smart Cover sleep mode isn't functioning when top lid is closed, iPad still on.

    Smart Cover isn't functioning correctly.  When lid is in place I can still see my iPad on with screen light.  No click sound after lid is place also.  I have remove the Smart Cover and fitted it to my iPad but still Smart Cover sleep mode is not working. 

    Go to Settings>General and make sure the switch to iPad Smart Cover On/Off is set to On.

  • IPad (4th Gen) What is a good case that goes with the "iPad Smart Cover"?

    Hi,
    I'm currently looking for a case that covers the aluminum back that also goes with the iPad Smart Cover. Thanks!

    I've bought a ton of back covers. It's been hard trying to find the right one. I've settled on two really good ones though:
    Caudabe Shell: This one's my daily driver, so to speak. I've got the frost version and it looks really good and has held up really well. Price is very reasonable too.
    Switcheasy Cover Buddy: I like this one as well. Only thing is that they don't seem to have a frost version. They just have opaque colors, which I'm not a huge fan of. This is also a little bit more expensive than the Caudabe cover.

  • TS2634 Why would my ipad Smart Cover suddenly stop charging?

    HHI my ipad Smart Cover suddenly has stopped charging when I close it. Can anyone give me a reason it might do that?

    Gotcha...figured it was worth mentioning.
    What I would do next (provided you've exhausted everything else) would be to backup the device using iTunes...backup your media as well. Then restore the device as new, not using any backup. After the initial setup, don't install any apps or media. Test for the issue. If the issue is present after restoring as new, that a good indication that there's a hardware issue. If the issue is not present after restoring as new, the issue a likely a botched/borked setting somewhere in the backup of the iPad. In this case (and assuming you want to clear the issue), you'll have to rebuild your device (apps media, settings, everything) from the restored as new state. This won't be pleasant or enjoyable but it may need to be done if you want to clear the issue. I had to do this recently to clear a different issue and I know it's not easy, especially all of the settings involved. I may have it a bit easier than most since I keep my iPads pretty empty...my 16 GB devices have more than 8 GB free on average (3 - 4 GB used).

  • I can not use ipad smart cover after upgrade ios 7.

    I can not use ipad smart cover after upgrade ios 7. It makes reboot again again...if i cover up ipad with smart cover. i never had this problem before. please fix this bug!!!!

    Change your iPod DNS to 8.8.8.8
    That should work. Cheers

  • When new ipad smart cover will launch in india?

    I want to buy apple new ipad smart cover, i am staying in Mumbai, India.

    http://www.apple.com/in/buy/

Maybe you are looking for

  • .VOB for Quicktime X in Snow Leopard

    In Leopard I purchased the MPEG 2 and Pro upgrades for Quicktime. This allowed me to open files from DVD with the extension .VOB. I could play the file (with no audio) and that is all I wanted. I can longer do this with the new Quicktime in Snow Leop

  • Missing built-in functions

    I am using MS SQL Server Management Studio version 10.50. Some built-in functions are missing, such as LAST_VALUE and IIF. Where can I get those?

  • Date parameter used in report selection

    Post Author: calj CA Forum: Upgrading and Licensing In CR XI, is there an option to convert date/time fields to date that was under Report Options in 8.5?  In the Select Expert date/time fields display the time, and date parameters are not listed unl

  • Webdynpro application Debug Configuration problem

    Dear Friends, I am trying to WebDynpro application debug Configuration. But I could not find the Debug Configurator link under portal's System Administrator -> System Configuration -> Web Dynpro Console -> Settings My portal version is J2EE Engine :

  • Partition of table in ODI

    Hi..friends. can we use partition of table in ODI 11g? please give an example with video or picture representation. Regards Soumya.