HT204204 my apple ipad wont turn on after i updating software

sir,my apple ipad (16gb) wont turn on after i updating software correctly.so still this off position and cant any work.please help me

You took a backup on your computer's iTunes prior to starting the backup, or you have a recent backup ? And you have all of the apps that you had on the iPad in the Apps part of your computer's iTunes library - none of your iTunes downloads are included in a backup (that contains apps settings and contents), the restore will look to pick them up from your iTunes library.
To restore select the iPad on your computer's iTunes and either do File > Devices > Restore From Backup
Or on its Summary tab in iTunes click the 'Restore Backup' button

Similar Messages

  • What do i do when my ipad 2 turn off after i updated software to ios 7

    does anyone know what to do when your ipad 2 gets frozen on the apple logo after updating the software of ios4 to ios 7?

    If reset doesn't work, force your iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • My iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    Hello ole-gunnar,
    Thanks for using Apple Support Communities.
    If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
    If you see a black screen
    You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on. 
    You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support. 
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Cheers,
    Alex H.

  • 4s wont turn on after OS update 8.1.3.

    4s wont turn on after OS 8.1.3 update. attempted restart several times with no success. fully charged battery & plugged I at time of update. iTunes doesn't recognize the device since it wont turn on so I cant even do a system restore. no problems previously.
    any suggestions? thanks in advance.

    The message is correct. Once you see the iTunes logo and the USB cord your iPhone must be restored. It has already lost all data stored on it. You can recover your data from a recent backup if you have one. You can recover all purchased music and apps without the backup. When I updated our 2 iPhones, I backed each of them up to iTunes before updating just in case. I recommend that you do this before you do any future updates.

  • My ipad wont turn on after black screen and apple logo

    i was playing on my ipad and then out of nowhere it turns off and the apple logo comes on. after about a minuete of the logo it disseapears and the screen become black again. i have tried holding both buttons down but it still wont turn on

    Hello dbrasif,
    Thank you for providing the details of the issue you are experiencing with your iPad.  It is definitely inconvenient and frustrating when you are not able to access your iPad.
    I recommend following these steps for the issue you described:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on),reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    You can find the full article here:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If you get to step 5, I recommend backing up your iPhone before performing the restore:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My Ipod wont turn on after i update it!!!!

    I was was updating my ipod to th ios 5 or 6 nd it ran out of battery. Now it wont turn on!!! Help

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • ?iphone 4  wont turn on after ios update

    Hi folks, I updated my iphone 4 with the ios5 or 6 update, and when it powercycled it would not turn back on.
    when I try to turn it on, i get the standard apple icon, then a usb symbol will appear with an arrow above it, and the i tunes symbol above that.
    Its obviously telling me to connect to itunes, but when i do, the device registers, but only prompts me to reset the phone. After doing that, same prob...HELP

    If connecting in recovery mode, as explained in this article did not help to restore the phone again, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place or by contacting Apple Support.
    If you can't update or restore your iOS device
    iPhone - Contact Support - Apple Support

  • Iphone wont turn on after iOS8 update

    I was updating my Iphone with iOS8 update through iTunes on my laptop it went all through until the end i unplugged my phone as it wasn't doing anything then it come up with iTunes logo and charger logo and now it wont turn on at all, I've tried holding the top button and home button and charging it, nothing is working! help me!

    I eventually got it to work by constantly, over and over again,  plugging the iPhone into the mac with my finger on the home butting until one time it recognised it then I went through the factory reset setting for it to just drop off the iTunes pane and jam on me again. I did the same thing (I know the definition of insanity is trying the same thing over and over again and expecting a different result!) again until it recognised it again and thankfully this time it went through all the factory reset process and updated, losing unsaved videos of my sons birthday party the day before in the process ( I thought they got saved to the cloud too, but apparently they don't!) so thats how I fixed it.........that was last Thursday......Today I thought it would be safe enough to update my iPad and guess what? I have been sat here now for an hour, same thing, the update came down, the iPad was prepared for update, the screen went on to the logo screen the bar got to 100, the device disappeared from the iTunes pane and the iPad is stuck in the restart screen!!!! Its been that way for an hour now!!! I am not a happy bunny!!! now I will swiftly be going over to the iPad forums to see if there is any info there about it or should I just try what I did with the phone???? Either way this *****!

  • Iphone5s wont turn on after IOS update

    This morning my phone was ready for the new IOS update. Everything was going fine and it updated as it did before but now it just wont turn on. I tried pressing and holding the power button, the home button, and both at the same time with no luck. Its an older phone and was working fine before. i have no insurance and dont know what to do.

    If it's a 5s it's still under warranty, even if you don't have insurance.

  • IPad wont turn on after shutting it down

    I was reading and the screen just went black, the I shut it down and now it doesn't want to start up again,  If I plug it into the computer it keeps making a "connecting" sound.  I have tried everything, holding the shut down button and the wake up button in. Plugging it into the computer wile holding the wake button and nothing is working, I even slapped it 3 times.  Please help!!!! 

    Don't slap the iPad. It's an electronic device with connections that you could jar loose if you slap it, or drop it. Try a reset.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Wont turn on after failed update...

    So i tried updaing my device via PC COMPANION and then it failed , after that i tried to turn on my device and it keeps telling me to retry and then just goes black , i tried to repair it via PC COMPANION but it also FAILS
    and i cant do the Power up button + volume button because the volume buttons are broken , cuz u said ur phone is WATERPROOF which clearly isnt cuz when i just dipped it into water the volume keys broke and didnt work after that.

    If your volume keys don't work then you need to seek further help from Xperia care http://www.sonymobile.com/global-en/support/contact-us/ or return it to the place of purchase
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Wifi wont turn ON after Yosemite update

    After hours of trying to update from Mavericks, i finally got into OS X Yosemite; but i cant turn the Wifi ON.
    How can i solve this issue?
    Anyone having the same problem?
    Thanks.

    redondofuentes wrote:
    Thanks for the try Eric... but none of these work. My wifi is stuck in the off position. When I click the "turn wifi on" buttoning my network setting or from the network menu bar... nothing happens.
    None of these articles address this issue.
    I tried the disabling of AirDrop in Terminal too and my system said it could not find the filE
    This is the only thing that worked for me.
    1. Go to System Preferences and open 'Network' - or click your wifi triangle along the top tool bar and select 'open network preferences'.
    2. Click your wifi on the left hand side from the list, and then click the small cog at the bottom of that box, and click 'Make Service Inactive'.
    3. Once you've done that, click the minus to delete your wifi as an option from this box.
    4. APPLY!!
    All other instructions I read said to click the plus and add your wifi again and then restart. Well that did nothing for me, infact it did nothing about 7 or 8 times, soooooo...
    5. Restart your computer now, without any wifi configuration setup.
    6. Once restarted, go back into system preferences, into network, and use the + button to add a wifi connection back into your computer.  With any luck, you will be able to click on 'Turn wifi on' and it will actually work!

  • Z10 wont turn on after OS update

    I had my Z10 plugged in while I was updating the new OS. Left it for the night and when I got up the next morning it wouldn't turn on, despite the fact that it was still on when I went to bed. I've tried another charger, tried plugging into the computer with and without a battery. Computer won't recognize that it's plugged in and without a battery, the LED only comes on briefly when being plugged in. I switched batteries with my wife's phone and my battery works fine in her phone with 70% charge. Using her battery, the phone started to boot up, but won't progress passed the blank screen with blackberry written in white across it. I tried it a few times with no further progress. Then I tried to turn off the phone and now it does nothing when I change batteries. I assume there was an issue with the OS update, but dont know what to do next. Suggestions?

    If your phone's data is already backed up, you can try the autoloader procedure here:
    https://developer.blackberry.com/devzone/blackberry10devalpha/devalpha_update.html
    This will install a developer version of the OS, that will not be complete (apps like the clock, etc. will be missing).
    Install a developer OS version that is old, so that it will be out of date vs. what your carrier currently supports.  Once the autoloader procedure is done, go back through the initial device setup and get your wifi etc. set up.  Then go check for updates under the settings app, and load the production consumer OS version from your carrier.
    Once your phone is usable again, you may want to download the free BBVE diagnostics app and run the hardware tests.

  • Ipad air wont turn on after update today?

    ipad wont turn on after update today. cannot do a hard reset either...
    tried holding the power and home at the same time, still won't turn on suggestions?

    How long did you hold the power and home buttons?  You need to do that for about 30 seconds, sometimes even more before the apple logo appears.

  • My ipad wont turn on but its heating

    my ipad wont turn on after a nigth charge, pressing home and off at the same time wont work, the ipad is a little bit hot.

    That doesn't sound good, have you tried holding down both the Home & Sleep/Wake buttons together for approx 10 seconds - realise you've mentioned this but not sure if you've tried it for that amount of time or until the Apple Logo appears?
    Failing this if you plug in the charger and cable and connect it to the mains and your iPad does anything appear on the screen?
    Regards,
    Steve

Maybe you are looking for

  • How do I remove the " 1" from Facebook contacts?

    With the new iOS 6 Facebook features my contacts now include everything from iCloud and from Facebook. I love it and appreciate that it links duplicate contacts between the two groups. However, the phone numbers do not register as the same. All of th

  • Web service returns [object Object] into Label

    I can return webService calls into a data grid fine, but if i try to bind a result to a Label or Text area i always get [object Object] returned. I can't figure out how to format them into their proper text? He is my string for the label <mx:Label x=

  • Problems defining the array for quicksort

    import java.io.*; import java.util.*; import chn.util.*; public class Store           private Item [] myStore;           public Store (String fileName) {                fileName = "file50.txt"; /*          public void displayStore ()                 

  • How apply rolling shutter plugin AND stabilisation in CS5.5 ?

    When i apply the rolling shutter plugin (The Foundry) AND the After Effetcs's stabilisation , the fisrt effect is cancel by the second one , i've tried to pre-compose my first layer with the rolling shutter effect but AE move it into the new composit

  • Printing from LR

    Help! If I print from LR, all colours are muted and dull when I allow the printer to manage the colours. If I set it to BJ Colour Profile the colours improve. What is BJ Colour Profile? If I print from CS2, no probs (set to 'Let Photoshop Determine t