HT204266 I cant slide to unlock my ipad, because theres a notification about unable to download application...and the button done and retry will not perform
I cant slide to unlock my ipad, because theres a notification about unable to download application...and the button done and retry will not perform
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.
Similar Messages
-
my ipod 3rd gen. touch screen is unresponsive, cant slide to unlock or enter passcode to access ipod. What is the cause? how do i fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
What do you do when you cannot slide to unlock your ipad?
CAN SOMEONE PLEASE ADVISE - MY APPLE REFUSES TO SLIDE TO UNLOCK. PLEASE HELP.
There is no need to shout.
Does anything happen when you touch the slider ? If not then have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
My iphone is smashed at the bottom and i cant slide to unlock what do i do
my iphone is smashed at the bottom and i cant slide to unlock what do i do
Why did you start a new discussion?
https://discussions.apple.com/thread/6401706?tstart=0
All you do is confuse users -
I can't slide to unlock my ipad therefore I can't even use my ipad . It froze. Please help. Thanks.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?
For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.
-
hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me
Perform a Reset... Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
I have downloaded Games with iTunes to my PC, but I cant copy it to my iPad... It told me to authorize my computer, I have done so over and over again, but still cant copy and the message to authorize this PC keeps appearing..... Whats wrong?
This forum is for questions about Apple Remote Desktop, Apple's software for managing networked Mac systems, and hence not the best place for your question. I'd suggest asking in the iTunes for Windows forum.
Note, however, that iTunes has never been supported on the 64-bit version of Windows XP, so you're on your own to attempt to get it working.
Regards. -
ipad screen will not slide. Tried resetting and a factory reset but still will not work.
I have the same issue on my Ipad Air. Screen will not rotate, I have reset the settings, still only displays in the portrait mode. A couple of interesting things though. a couple of days before it completely locked up into portrait I would have to turn the ipad off and hold it in the orientation I wanted because it would not change orientation after I was in an app.
Also, I just played a Netflix video and it was in landscape mode.
Any ideas?
Thanks, -
I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?
You can always finish the downloads in iTunes on your computer and then the TV Shows to the iPad. Launch iTunes and go to Store>Check for available downloads. Finish the downloads and then sync the iPad.
As far as trying to finish the downloads on the iPad .....
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to download again. -
The new version of iBooks will not open on my iPad(3gen) after it was installed. Reinstalling makes no difference. It opens then closes right away. Any fix??
Anybody else have this problem?Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
My ipad has a black screen and the apple logo and won't do anything else. I have tried to reset to no avail.
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it so I have no idea how to get it back! Help!!
Then you will need to try restoring it once more:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I have the volume control symbol in the enter of my iPad all of the time. My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level. Thanks
Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.
-
the buttons of my ipod are not working, that means i cant use the ipod because the scream is black and i need press one of that buttons for use it, what can i do? thanks
You will need to get it serviced.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
Is this hardware enough to run 5 VMs
I want to run 5 VMs for test only (no production, no expectation of availability) on the following hardware: Dell PowerEdge 2900III server with 2 x Quad Core CPU @2.0 GHz, 32GB RAM and 4x 73 GB 15k rpm SCSI direct attach storage The VMs will run OEL5
-
HT201210 what does it mean when it says the firmware file is not compatiable when trying to update
what does it mean when it says the firmware file is not compatiable when trying to update
-
Material cost in production order plan cost
Dear all, -we are in sales order cost object with non-valuated stock... -we have created two production orders from MRP run. First one is for semi finished material and second one is for finished material. Issue-1 Both production orders not showing m
-
Hi! I was wondering if there was a kind of sudo in content server. I need to have a user (or some users) executing a service as system administrator but can't give to him the role of admin or sysmanager. In fact, they just need to update a metadata i
-
Hi Everyone, Please can anyone provide me some suggestions for how is solution manager being used to monitor the system? Like what all we can use early watch reports etc. Thanks in advance. Regards, Avneesh