HT204291 AirPlay icon appears but still no airplay on tv? How to set it

Please advise airplay icon appear but still no airplay

I think i have thé Same issue. I have an ipad 4 and a 3rd generation Apple TV. The airplay button IS SHOWING. When I click on it, i can click to enable the mirroing. It automatically log me off my Apple TV. It's not working and have never been working. Can you help me figuring out what is going on ?

Similar Messages

  • Airplay icon appearing, but clicking it doesn't work with Apple TV

    I have a Macbook Air (new 2013, just arrived today). The OSX is updated. For some reason, the Airplay icon appears but when I click it and select "Apple TV," it just flickers for a second, tries to connect, but then disconnects immediately. The display does not show up.
    Also, my Apple TV is up to date as well.
    What should I do about this?
    edit: I recently saw this error pop up: "Error 200500" when connecting to the airplay.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • HT201412 My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..

    My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    and
    try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Charging icon appears but not recognized by computer  help!!!

    Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
    Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
    What's going on???
    HELP!!!!

    Have you tried a different cable?
    This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
    Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
    MJ

  • I just updated my itune on my PC and now it doesn't start.  There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

    I just updated my itune on my PC and now it doesn't start.  There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?  How can I fix the problem? Thanks

    Try this from MacFixIt as well:
    In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
    * Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
    * Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

  • I have installed Angry Birds Season and the Icon appears but when I select that game it goes back to the main screen???

    I have installed Angry Birds Seasons and the Icon appears but when I select the game it starts to open but then goes back to the home screen.  What to do???

    Try closing the app completely and then see if it works when you re-open it : from the home screen double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Angry Bird Seasons app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    A third option if neither work is to delete the app and then re-download it

  • Unchecked show icon preview but still showed icon preeviews / ikon preview (thumbnail) can not disable,

    Systems and Network
    2 iMac Intel i5, 8 GB Ram, 1 TB SATA HDD, Mountain Lion (10.8.5 or 10.8.4 )
    1 iMac Snow Leopard (10.6.8)
    1 Mac pro Intel Xeon, 6 GB Ram, 1 TB HDD, Tiger (10.4.11)
    A few power PC G4 Tiger (10.4.11)
    1 Linux SME Server 7.5 (Samba Server)
    We are works on the Server(Linux). There ara many pictures and Text Files  (tif, jpeg, rtf, doc, txt etc.) in server folders.
         On the 2 iMac (Mountain Lion)
              Text files in the folder have viewed normal(optimum) time. But Pictures in the folder have viewed very slow and very long time.Because showing pictures icon (show icon preview) very slow on the Mountain Lion. We tried List View/ColumnView.We have waited very long time(for pictures in the folder) when we selected a folder every time.
              We unchecked show icon preview but still showed icon previews, icon preview (thumbnail) can not disable, We tried "Finder preferences", "View > Show View Options > Show icon preview(unchecked)" and  "Show icon column(unchecked)" but still "Show icon preview(checked)" and  "Show icon column(checked)"
         On the Power PC G4, Mac pro or iMac (Leopar/snow Leopar or Tiger)   
              Everythings ok. There isn't any problem.  Text files and Pictures in the folder have viewed normal(optimum) time
    This problem only on the Mountain Lion, on the other OS (Leopar/snow Leopar or Tiger) no problem.
    How to resolve this problem?
    Best Regards

    Good news: I found a solution.
    Start iTunes, remove all your voice memos from your library (back them up if you need them), quit iTunes. Restart Finder. Done. I hope that helps!

  • HT201401 When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't h

    When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
    - During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
    - With the headphones, everything is ok!
    - I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
    I don't know what is problem,because the speakers work.

    Hello jam5064,
    We've an article which provides tips that can help get your iPhone working correctly.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • When I switch on, the Apple and progress icons appear but it does not start.

    When I switch on, the Apple and progress icons appear but it does not start. I tried resetting PRAM, Utilities, everything. It says the system is OK. I even reinstalled Tiger, but nothing has changed.

    Given that you were able to reinstall the OS, you must be able to boot from the install disc.
    Have you run Apple Hardware Test?
    Tried running on just one RAM module, then switch it to other slot, then repeat with other module?
    Safe Boot?
    Checked SMART status?
    Run Repair Disk:Boot from install disc (insert disc > restart > immediately hold down ckey and keep holding it until you see “Preparing Installation”) > at firstscreen select the language and click Continue > click on the Utilities Menuin the menu bar > open Disk Utility > select your HD in the panel on theleft side> click Repair Disk at bottom of main window. Run this at leasttwice, and keep running it until it says “appears ok” twice in a row. If thatdoesn’t happen, you may need a stronger utility such as DiskWarrior or if thedirectory is damaged beyond repair, you may need to reinstall the OS, or youmay have a damaged HD (repair utilities can only repair the directorystructure, not the HD itself). When this is finished, quit Disk Utility, quitthe installer, and restart. Once booted normally, go to Applications >Utilities > Disk Utility and run Repair Permissions.

  • I cant start trial Indesign CS6. The icon appears but when I click it it doesn't start.

    I cant start trial Indesign CS6. The icon appears but when I click it it doesn't start.

    What's your OS?
    What exactly happen when you open the click on your Indesign Icon ?
    Did you get any error while installing the software?

  • Firefox icon appears but when I click on it it shoots across the page and disappears

    hi
    the firefox icon appears but when I click on it something shoots across the screen to the right and I can't get access to the web because I can't click on it
    at the bottom on the screen my main page appears but Iif I click on it nothing happens
    == This happened ==
    Every time Firefox opened
    == last week ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; Tablet PC 2.0)

    See:
    * [[Software Update Failed]]
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder:
    Mac: /Applications/Firefox.app/updates

  • I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hi,
    I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hello there hastibahreini,
    It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I have a gift card that has been redeemed once but still has money on it how do I reredeem it?

    I have a gift card that has been redeemed once but still has money on it how do I reredeem it? If possible

    Expanding on what Niel said, once you redeem a gift card, the amount of the card is registered in your iTunes Store account and the card can be trashed. All you need do now is log into your iTunes Store account, the one you redeemed the card through, and make purchases. The cost will be deducted from your credit balance automatically.
    A couple of caveats/warnings:
    - you can buy anything in the iTunes Store with the balance other than a gift for someone else;
    - if you don't have a credit card also registered to your account, keep careful watch on your balance so you don't overspend it. If you do, the purchase will go through but you won't be able to download anything else, even free content or items you already purchased, until you add another gift card or a credit card to cover the amount you owe.
    Regards.

  • My billing address is correct, but the i keep getting that my security code is incorrect and can't download apps.  I have re-entered all of my information in my account, but still get error message.  How to over-ride?

    My billing address is correct, but the i keep getting that my security code is incorrect and can't download apps.  I have re-entered all of my information in my account, but still get error message.  How to over-ride?

    If you have American Express, your 4-digit security code is on the front. If you have VISA or MasterCard, your 3-digit security code is outside the signature block on the back of your credit card. It happens to me also.

  • HT1212 I no longer have an iPhone but still use iTunes...how can I get iTunes to forget my phone

    I no longer have an iPhone but still use iTunes...how can I get iTunes to forget my phone

    What do you mean forget your phone? iTunes will still function just find without the phone. I'm not sure what you want it to do.

Maybe you are looking for

  • Restore hp pavilion dv6 with disk

    I need to restore my laptop. It keeps asking for the disk, but I never made any.  Is there any way I can find a download? HP Pavilion dv6 notebook Product number: LW260UA#ABA AMD A8-3500M APU with Radeon This question was solved. View Solution.

  • Unable to create working USB live medium

    I seem to have a quite common problem, at least I found a few very similar topics on the forum. However, I didn't find any that offered a solution I could use. My secondary harddisk with arch broke so I replaced it. Now I want to reinstall arch but b

  • V1.5 Export to CSV or TXT and not getting all rows (600K+)

    We've recently moved to SQL Developer from a third party application and have been running into issues attempting to export very large queries (600K+ rows). We did find a very helpful article which suggested modifying the sqldeveloper.conf file setti

  • New skypename or new subscription?

    Hi! During the last months I used scype only for private calls. Now I want to use it regularily for my business and therefore I want: 1) either change my skype-name to my companies name. 2) or create a new account. This way is a bit more complicated,

  • "Unable to start application" on Handset and Simulator

    hey there, i'm having some problems getting any flash lite content to run. i get a message that reads "unable to start application" whenever i launch my apps on the handset and in the simulator. i installed flash pro 8 (trial) on my system, installed