HT204291 Help with AirPlay from iPad

I'm trying to send a video to my AppleTV from iPad. Sound is heard, but image is main menu. Any suggestions?

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).

Similar Messages

Issue with Airplay from iPad and iPhone

Hi,
I have installed YUPPTV app into my iPad and connected Apple TV to my HDTV and trying to play my TV channels from YuppTV via AirPlay but after watching them for about 20 minutes it is disconnecting automatically and AirPlay icon is disappearing from my iPad. I really dont know why this is happening.
Please help me on this
Regards,
Venky

could happen if your wifi router needs a firmware update you can find those at the router makers site

Youtube content suddenly not available for last 2 days. Everything else on gen 2 is fine. I can access Youtube with AirPlay from Ipad.

I have been able to access Youtubes, my favorites, my own Youtube videos and playlists without a problem until 3 days ago. I can play Youtube from my Ipad and use Air Play but eould prefer to access directly as I do Netflix, podcasts, etc. When I select Youtube it just churns but never opens. Any thoughts? I have done the upgrade and it worked fine after that as I recall.

Read a bunch of posts from 2008 and 2010. The only step I found that I hadn't tried was the ol' plug pull. After that, I got the first movie I tried renting. ??? At least it works now.

HT204291 Help with Airplay icon.

I cannot see the airplay icon in the multitask bar. I used to, but now it has gone! Any advice?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    2.    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    3.    Restart the Apple TV (Settings > General > Restart).
    4.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    5.    Restart your router.
    6.    Restart your mobile device.

Can I use ATV(2) and Airplay from iPad without a network?

I'm going on holiday to a rented villa which has a TV (which I assume has an HDMI port) but there is no internet connection, therefore no router or local WiFi network. I'd like to be able to play content from my iPad and/or iPhone via Airplay on the TV using my AppleTV (2) (which I could easily take with me).
However, experimenting at home, it seems that ATV won't do anything at all unless connected to a WiFi network. Airplay works fine even if the network is not connected to the internet; even purchased content seems to be ok (but DRM free - I haven't bought any non-DRM-free music). However, without a separate WiFi router, ATV doesn't seem to do anything. In particular, my iPad doesn't "see" it, and can't connect to it, unless both are connected to an existing network.
I don't understand why this should be so. Should it not be possible to connect two WiFi devices (eg iPad and ATV) to each other without needing a router?
I can get it to work if I use my MBP to set up a WiFi network by using Internet Sharing to share my (non-existent) ethernet connection using Airport. Airplay then works between my iPad and ATV. However, this is a rather clumsy arrangement - I'd been hoping I wouldn't need to take my MBP with me for that week.
So, am I doing anything wrong, or is this (Airplay from iPad to ATV without a router) just something ATV can't do? And is it "can't do" (ie ATV has the wrong chipset or something) or "won't do" (ie Apple have set it up so it won't work like this)? And if it's "won't do", any chance Apple will provide this functionality in the future?
Message was edited by: Doug the Mac
After submitting this, I found an answer to a similar question last December (Can I create an ad-hoc (WiFi) network between my iPhone and Apple TV?); basically saying that you need the router; but I'll leave this as a question (a) to help others find it, because I looked before I submitted and didn't find a relevant discussion and (b) just in case someone else has a better idea......

You could take the airport and setup a wifi network without Internet. The atv2 can connect without Internet access to a wifi network setup with a router. Be patient when it connects, it tries to establish an Internet connection and it takes a while to find there isn't one!! Eventually it offers to connect without Internet. Once connected you can stream to it as usual. One word of caution - don't disable home sharing, if you do and re-activate it the atv2 seems to need an Internet connection to verify your account.
I did precisely this recently when I had to wait for a couple of weeks for Internet to be connected at my new house.
But, you need the router - unlike iPhone, iPad etc the atv2 will not connect to an ad hoc network.

When I use airplay from Ipad foxtel appication video doesnt come on tv

when I use airplay from Ipad foxtel appication video doesnt come on tv, audio comes. It works ok with other applications

Some apps/providers disable video over Airplay for commercial reasons - check teh foxtel site to see if video airplay is allowed.
Can you use Airplay mirroring instead of airplay?
AC

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

Can you help with why my Ipad, when streaming with Airplay, drops off my wifi extender?

Hi, I use a wifi extender to get better coverage down the back of my house. When close to my router, I use airplay from my ipad on my regular network, streaming to my marantz sr5007. It works perfectly. When I'm in the backroom, I choose the extender network for my ipad (network.ext) to stream music using airplay. After a few minutes (normally 3 but it's been up to 20minutes), the music stops and the ipad shows it's back on it's own speaker. No music is playing. I can then choose the marantz again, the music will start. Two minutes later the same thing happens.
This only happens when on the SSID of the extender. Strangely, when I use itunes on my pc to stream music, and place it on the extender SSID, it's stable and keeps the connection to the marantz.
Any help would be greatly appreciated.

Thanks very much. I'm going to contact Netgear when I get home to see if they've got any ideas.
I'll also try to use a static IP for the marantz. That seems to have helped a couple of people.
Thanks again.

Apple TV internet no Airplay from IPAD despite WIFI router

Hi,
My Apple TV2 is connected to my Ethernet wired network, there is a Netgear Modem Router on this network that allows DHCP and WIFI access WPA2 secured.
The Apple TV can connect to the Mac to share the itune Library over wired ethernet.
My Ipad connect to the same Netgear throught Wifi and I can access every Mac on the ethernet network with all apps.
BUT No way to connect iPad Wifi to the wired ethernet connected Apple TV, I mean iPAD wifi to the netgear router to ethernet wire to the Apple TV, exactly what I do for mac's and pc's that are ethernet connected to the netgear Router.
My iPad can connect to MAC with the same network for screen sharing with decicated Apps.
If I unplug the apple TV from Ethernet wire and I configure WIFI, my Ipad connect instantly to the apple TV for Airplay or remote.
Wifi is far too slow for Video display, you have to wait a lot before it start and it jitters, so I need the fester connection of my 1GB ethernet network from Apple TV to MAC, this is working well but then I cannot use ipad airplay...
every Item is using DHCP from the netgear.
I hope this is clear enought.
Did anyone succeded in implementing such a network configuration???
Does Apple TV neeeeddss direct WIFI for using Aiplay from iPad (it's the same for iPhone by the way) ??? WHY (performance, bonjour, marketing lock ??)
Is there a way (by Jailbreak?) to enable ethernet wiring and Wifi on the Apple TV???
Tahnk you for your help
Regards
Luis

The netgear router did not work properly with apple TV, I disconnected its WIFI and use it only as a modem for internet cable to ethernet local network, so no wifi.
I bought a time capsule that I included in my ethernet local network and used its wifi as a bridge for wifi devices (ipad iphones) to local network with internet acces through the modem router.
Then I connected my apple tv2 to my ethernet local network.
With this configuration my ipad or iphone can through time capsule wifi access ethernet local network and use apple TV2 to display ipad/iphone screen/video on my TV. superb indeed...
regards

HT1766 I need help with restore from bachup

I NEED HELP WITH MY IPAD RESTORE FROM BACKUP

This is the iPod touch forum and you are not providing any information to help you.

Conflict between home sharing from MacBook Pro and airplay from ipad / iPhone?

Just bought an Apple TV, and set it up yesterday. Everything works fine, with one exception. When I have iTunes open and home sharing turned on the Apple TV, when trying to mirror airplay from my ipad 4th gen or my iPhone 5s, I get nothing on the Apple TV, just black screen. It also makes the device run really sluggish.
I've definitely narrowed it down to this conflict, quitting iTunes on the MacBook Pro immediately resolves the issue. So no big deal, right? Just turn off itunes. Except the whole point of buying the Apple TV is to have a central point I can stream all my media in the house from, I'd like to have my MacBook Pro, iMac, ipad and iPhone able to take control of the Apple TV without having to run across the house to turn iTunes on or off on the computers.
This only happens when mirroring, normal airplay audio or video works just fine. MacBook Pro and Apple TV are hard wired Ethernet, ipad on wifi.
Is this a known conflict? Is there any solution?

Normally there ought to be an airplay button in the top menu bar (where also the battery, wifi, clock, etc are located). And in display settings at the bottom there ought to be a drop down menu labelled Airplay Display.
If not, it seems that your Apple TV cannot be found. Are both on the same network? Have you enabled AirPlay in the Apple TV (Settings -> AirPlay set to On)?

Apple TV loses wireless network connection when using AirPlay from iPad or iPhone 5

Our Apple TV loses connectivity to our wireless network while using Airplay from our iPad or iPhone 5. This started occurring after the latest iOS update. We are able to wirelessly stream movies from iTunes without any problem. This issue occurs only when using AirPlay. Does anyone have any suggestions?

I have a:
new MBPr 15" late 2013 with dedicated graphics card
new airport extreme base station
3rd generation apple tv
iPhone 5s
200mb download speed (not important, as streaming video on your local network has nothing todo with outside bandwidth)
All equipment is up to date software wise. Airplay mirroring from my laptop to my apple tv is ok. I get frequent lag, pixelation, audio skip (every 10 mins or so).
I'm using the 5ghz specturm to connect to the airport express so shouldn't have any inteference from my neibours (accordiing to iStumbler i'm the only person with a 5ghz setup using channel 30). I've tried connecting apple tv wirelessly and wired. No issues streaming from my iPhone or an iPad!
Surprisingly, using apps such as Beemer or Air Video Server on my MBP work better than native mirroring when it comes to video play back.
Strange when you think how Air Video works:
Video file lives on MBP
iPhone connects to laptop
Video plays on iPhone and is sent to Apple TV via Air Mirroring
Rather than:
Video played on laptop
Video sent to Apple TV
Seems bizzare that my iPhone can handle better streaming than my pro laptop.

HT4437 Help with airplay and pioneer AV amp

Hi, I have a Pioneer 1326-k (Basically an Elite VSX 53). It is wired directly into my router. I can use airplay from the PC, But not from the Ipad (belongs to the kid, don't know what gen), Iphone (3GS), or the ipod (I am guessing 4 as we just bought it). I have the blue tooth adapter, and it works fine. The wireless control of the amp works fine as well (iControlAV2). Any help appreciated.
Ian

Not sure why your Pioneer receiver is unable to perform as a DHCP client, but adding the appropriate IP address information should be relatively straight-forward.
You can easily get the information using your iMac and going to: System Preferences > Network > Ethernet or AirPort depending on how your iMac connects to the network.
Here's an example from mine. Note: I'm using OS X Lion so it will look a bit different from yours.
For the Pioneer, the DHCP address = Router address; DNS = DNS Server, etc. However, DON'T use your iMac IP address for the IP address used by the Pioneer. The IP address you should use would be in the same subnet, BUT OUTSIDE of the DHCP server range of your router. By default, the AEBS, uses 10.0.1.2 thru 10.0.1.200 for these addresses. I would suggest using 10.0.1.210 for the Pioneer.

HT5517 AirPlay from iPad to tv

have iTunes loaded on my PC. Do I need it on my iPad to use airplay to protect from iPad to tv?

Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

Apple TV causing problems with Airplay from Airport Express?

I am having a problem with Airplay on my home network. I have two Airplay devices - Apple TV and an Airprot Express. I soon as both of these devices are on my wireless network Airplay starts to create all kinds of errors, delays, inability to connect and ultimately both AP devices crash.
The AE is connected to the existing network and is only being used as an airplay device to send music to a set of speakers.
I have looked at the knowledge base & I tried all of the following (plus every conceivable combination):
Restored both the Apple TV & AE to factory settings.
Checked both are on independent IPs.
Checked all the settings on my router.
Restarted my router.
Changed the channel on my router (it's worth mentioning here that both devices are on a 5GHz connection).
It's also worth noting that when I did a factory reset of everything and set the ATV up on an ethernet connection everything worked swimmingly until I unplugged the ethernet cable and connected the device to the wireless network.
Both work independently (i.e. when the other is not connected to the wireless network), but need restarting if the two have been run at the same time.
So - in a nut shell - it appears to me that the two devices are interfering with each other - but how?!
Are any geniuses out there able to help?
Thanks in advance.

Thanks Winston. I put the APE onto the 2.4 connection. This didnt solve this issue, but then with the two devices on the different connections I changed the channels a few times and eventually I found a coblination that works! I now have a problem where the ATV doesn't wake up to AirPlay, but I feel this is most likely a separate issue.

HT204291 Help with AirPlay from iPad

Similar Messages

Maybe you are looking for