HT204291 Video is black screen

I am getting a black screen when I AirPlay a home video captured by ipad3.
Air playing other video sources like YouTube works fine as does still frame pictures.
IOS is latest version and no updates available.
Suggestions?

seems to be a problem with ClicktoFlash. I went back to 1.5.3. The one available on the Apple extensions page causes the problem.

Similar Messages

YouTube videos a black screen an no play button since installing Flash10. Firefox 3.6.14 and OS X.4.11 What to do?

Hi
Re Mac intel... Firefox updated to 3.6.14 and advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11
Do I need to uninstall Firefox and re load an earlier version and an earlier version of Flash etc... will I lose my bookmarks and firebug? If so not worth it.
Would really appreciate help so sad not to be able to view any YouTube. Many thanks, Clare

Hi again - since writing the above I have posted on Adobe>Webplayer>Flash forum the following request and will post on here if I receive a reply that works:
Firefox updated to 3.6.14 and then advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11 Have now followed Adobe instructions to Uninstall Flash player on system and then Install Flash 10. But still at YouTube Safari says Flash 10 is needed and in FF shows a black box only. I use Intego virus barrier but this has never blocked an update before. Flash is enabled in Firefox and Safari.
eldnolb at Adobe forum advised: Go to this site and right click on the Flash logo, Settings, Display Settings. UNcheck the hardware acceleration.
http://www.adobe.com/software/flash/about/
But when I go to this page no logo appeared for me to right click on, which again means that Flash player is not working... so I could not access Settings, Display Settings, Uncheck etc. Was advised to start a new Mac entitled thread. Clare

Mov videos show black screen after latest update (idvd, iweb)

Hi MacUsers,
I am facing a severe problem after updating my MacBook Pro (Mac OS X 10.6.8) with iDVD 7.1.2 and the iWeb Update. I opened a keynote'09 presentation and encountered that most videos do not show up or just show a black box. Then I tried to open the original mov videos with QuickTime Player 10 and 7 but also black screen. Everything worked perfectly before the update. Any ideas how to solve the problem? It is urgent because I have to give a presentation tomorrow. By the way, using VLC works fine, but this does not help me with keynote. Thanks for any answers.
Best - $putnik

Here is a comparable problem described in an older thread:
https://discussions.apple.com/thread/2259769
It seems that there is still a problem with QuickTime. All other players such as MplayerX, VLC or mediAvatar can handle the mov videos (Apple Motion Jpeg A). Is there a solution?
Best - $putnik

Exporting "Youtube HD" Preset results in no video just black screen

Hello,
I am a new user to Premiere CS5. I made a short video and would like to put it online in HD for youtube and vimeo. I shot the footage using a Canon DSLR t2i in HD at 24fps.
I am trying to export it in order to upload it to youtube and I tried to the preset under H.264 that is called Youtube HD. When it finished I went to watch the video and it was just a black screen but the audio worked fine. The Export video box is checked so it is not that.
I exported using Quicktime Format but the quality was a little worse. I am now trying HDTV format to see how that turns out.
Is there something I can do to make the Youtube HD preset work correctly? I imagine that's the best option for uploading to youtube.
Thanks!

Thanks for replying =)
My footage properties are all as follows (except different file names obviously for different files):
Also, I am not using the audio at all in the project, just the video.
File Path: /Users/jonirizarry/Documents/LBR/MVI_0726.MOV
Type: MPEG Movie
File Size: 1.3 GB
Image Size: 1920 x 1080
Pixel Depth: 32
Frame Rate: 23.976
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:03:50:15
Average Data Rate: 5.6 MB / second
Pixel Aspect Ratio: 1.0
I am not sure what you mean by assets but if you mean what computer am I using. I am on a MacBook Pro.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,3
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Just installed Adobe Premiere Pro CS5 a few days ago.

Video.app black screen

64 GIG 3G
========
Watching a video on the train and the 3G cellular connection is lost (through the tunnels). A message appears with "Dismiss" or "Settings" which interrupts the video so hit "Settings" to turn airplane mode on so avoid the constant connection lost message. Go back to the video and nothing but a black screen with no controls or ability to do anything apart from hit the home button.
A hard reset, quitting the app, or any other trick does nothing. The app is still a black screen.
Any ideas apart from a full restore?

Sorry, I am a WiFi only iPad owner. I have no clue how to get the message to stop. But now I do understand that the comment was made so you could describe what was going on at the time.
If my first suggestion doesn't work, another thing you can try is to double tap the home button and scroll the the ro the iPod control and hit the resume play arrow. Then go back to the videos app and see if it works.
Ironically and oddly enough, a third "fix" that I've read about involves downloading a free podcast, or playing a podcast in the iPod app for a short time, quit and then go back to the videos app and try again!

I need help with Final Cup Pro X...Video clip Black Screen

Hi,
While I was editing some video clips for a movie i am making (the files im using are .mov), everything was going fine then i made one mistake on one video then every video went black. There is no audio to the video clips. the begining part of the video played fine but the last clip is black.
the last clip playback is black.
my other clips that are not on the time line playback is black too.
then when i switched the media to show proxy, i got this....
but the beginning of the clips on the timeline
everything was working just fine till i made that one mistake on that one clip.
my mistake was slowing down the clip with with transition. Then **** happened.
Please help.
I really want final cut pro to work for me, I've just started using this software and paid alot for it. I just really want it to work out for me because i heard great things about this software.

Supported media formats
You can import and work with the following video, audio, and still-image formats in Final Cut Pro:
Video formats
Apple Animation codec
Apple Intermediate codec
Apple ProRes (all versions)
AVC-Intra
AVCHD (including AVCCAM, AVCHD Lite, and NXCAM)
DV (including DVCAM, DVCPRO, and DVCPRO50)
DVCPRO HD
H.264
HDV
iFrame
Motion JPEG (OpenDML only)
MPEG IMX (D-10)
Uncompressed 10-bit 4:2:2
Uncompressed 8-bit 4:2:2
XDCAM HD/EX/HD422
QuickTime formats
Audio formats
AAC
AIFF
BWF
CAF
MP3
MP4
WAV
Still-image formats
BMP
GIF
JPEG
PNG
PSD (static and layered)
RAW
TGA
TIFF

Camera Pod Problem: Preview video is ok, Shared Video is Black Screen

We have several rooms with a USB or Firwire capture device and an NTSC PTZ camera feeding composite video.
For example, we have a Startech SVID2USB23 USB Composite Video Capture device with a Sony EVI-D70 PTZ camera.
The problem is that we can "Start My Webcam" and get good preview video, but when we "Start Sharing", the screen goes black.
I did find a couple related postings in the forums:
http://forums.adobe.com/thread/778016
http://forums.adobe.com/message/3942993?tstart=0
From the postings, I think the problem is that the video may not be 640x480@20fps.
But I have to ask, why do we get good video in the preview window?
In the second link above, it's mentioned that higher resolutions and frame rates will be supported in future releases.
Is this issue addressed in the version 9.0 release scheduled for December 7?
For a work around, I saw the Talking Stick Add-on which looks very interesting.
I also found that ManyCam (http://www.manycam.com/) works to address the problem.
These work, but add a layer of complexity for our users that we would like to avoid.
Is there an easier way to address this problem?
Does version 9.0 fix the issue?
Thanks for any help,
Paul

I had the same issue when I upgraded. The "fix" currently via Adobe support is Stop the camera, open Camera and Voice Pod Preferences, move the slider to Low or Medium, restart the camera.
I am using the Osprey 230 card in 8 rooms, I would have been **** if I couldn't get this working. I changed all my templates to reflect this change so I don't have to troubleshoot every time we have a class.
Here is a link to the Known Issues where this is listed: http://helpx.adobe.com/adobe-connect/release-note/connect-9-known-issues.html There do not give the solution but when its fixed they should remove it from the list.

Sudden video crashes/black screen flashing with MSI GTX 680 + MSI GT 640 (PhysX)

I've been running an MSI GTX 680 Lightning + MSI GT 640 (dedicated PhysX) setup since last September with excellent results. Most of my Steam games would crash in less than 10-15 minutes before I added the 640.
Just this week, however, I've noticed a new and different problem. While playing several different games, the monitor randomly flashes black, then the game stutters and finally my whole system crashes. I've never seen this before. The only thing that seems to correct the problem is to scale back the resolution from 2560x1600 to 1920x1200 or even 1280x800.
The problem seems to be getting worse. Now, while doing anything on my PC, the system freezes briefly, the screen rapidly goes black, then turns back on and system unfreezes. This happens 3-5 times in a cycle then stops. The cycle repeats every few minutes and happened twice while typing this post.
I've got the latest graphics and other component drivers installed. All diagnostics say the video cards are working properly, but these problems persist.
Are these indications of failing video cards? Any/all suggestions appreciated.
My system specs: MSI GTX 680 Lightning 2GB, MSI GT 640 1GB (dedicated PhysX), i5-2500K, Asus P8Z77-V, Coolermaster V8, 16GB Corsair Vengeance 1600, 4TB storage, Corsair HX1000, Dell 3008WFP, Windows 8 Pro 64-bit.

First of all remove the GT640 so we can check if the issue is solely related to the GTX680. Then monitor temps in load and idle using Afterburner (>>How to use MSI Afterburner<<)
If problem presists when not using the GT640 remove current drivers in safe mode using >>Driver Fusion<< and install latest MSI driver (http://www.msi.com/product/vga/N680GTX-Lightning.html#/?div=Driver&os=All). Yes, I know that driver is older than Nvidia one but it is a surely working one with the special MSI design and features.

All flash videos have black screen and cause Firefox crashes

Whenever I'm playing a video with Flash, the screen is black although the sound is playing. Then Firefox is crashing.
I'm using the newest Firefox Version (28.0) on Mac OS 10.9.2 (newer Macbook Air) and the newest Flash version. I tried Safe mode and deactivated my plug-ins to make sure it's Flash.
I re-installed Flash and installed but it didn't help.
My Firefox crash reports say "hang | libsystem_kernel.dylib@0x15a3a" under signature and "EXC_BREAKPOINT / 0x00000002" under crash reason.

I solved this problem by disabling hardware acceleration in the settings of adobe flash (right click/context menu). Although this might be difficult if the video is crashing before you were able to access the settings menu.

Airplay only plays audio - video is black screen with subtitles

On my 5th generation IPOD Touch, after downloading a movie from Itunes, I only see audio. The video is all black, with subtitls only.
After many attemts to fix this - i.e. reboot Apple TV, Reboot TV, Reboot IPod touch, Reboot WIFI Router, I still saw this problem.
This is with IOS 7.01. Has anyone seen this problem? So annoying and frustrating!

I suspect you are out of luck based on this:
Can I play my rental on more than one device?
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.

Slideshow export video p1080 black screen only

I'm trying to export video, a 60 min slideshow, all tiff's, all previewed, no music but all I get is a 3.6 GB large mp4 file which is black, from start to end.
Does anyone has an idea what the problem could be?
Thanks for your help
Rolf

I'm trying to use Quicktime X, I'm on Mac. I exported a smaller version of the video (960x540) which worked but quality is by far not what I need.
I have to try p780 later to see if that works, but 1080p does not give me anything but black..
Thanks
Rolf

Youtube video is black screen

When I click on a YouTube video, the window has the word H264 right in the middle of it.
When I click on it to play, the window turns black. I cannot see any video. The sound plays ok.
I have tried many videos and it just won't play anymore.
It still works ok in firefox though.
Close all tabs and print plus are extensions just added recently.
Also I have ClickToFlash, but I have used that before with no problems.
How do I remove extensions?
I also had Wondershare Free YouTube Downloader installed, but I ran the uninstaller and that did not fix the problem.
Ussing Safari Version 5.0.3 (6533.19.4)

seems to be a problem with ClicktoFlash. I went back to 1.5.3. The one available on the Apple extensions page causes the problem.

Video loading into iphoto as black screen

I have loaded videos from two different cameras. One is fine. The other loaded the videos as black screens. I have downloaded a divx converter per the owner of the camera but it still doesn't work.
When I go to Macintosh HD from my desktop and go to all movies. These movies are there and have a thumbnail that shows a picture. But when I click to play the movie it shows the black screen.
Please help, thanks.
Ben

Ben
This probably means that the Mac doesn’t have a codec appropriate for the video format. Try install Perian
Regards
TD

News Videos will not play just get black Screen

I have IE 11 and FP12. When I click on a news video get black screen with message need FP 9.0.115. Why does the video not work?

Check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

I updated my MacBook Pro and now NO video will play. I get a black screen with "Plug in's Blocked" in gray on the display screen. Any suggestions?

I have a black screen instead of any video and Plug In's Blocked written in a gray box. This was after an update for Adobe (?). And can't find how to fix it. Everything else is geat. Tried restarting it and; as you might have guessed I'm not very tecky. Anyone out there? Please help me...I'm hopeless. Thanks

I'm experiencing the same problem as described above and it all started after tha 10.8.2 upgrade.
I had no issues until the last upgrade.
Has Apple responded to anyone about a solution to this problem?
I'm running a Mid-2012 MBP-R also.

HT204291 Video is black screen

Similar Messages

Maybe you are looking for