HT204302 my itunes does not recognize my iphone when plugged into computer it recognizes my iphone as still camera
Help
Itunes does not recognize my iphone when plugged into computer it recognizes it as a still camera. I have installed the lastest version of itunes and gone through the troubleshooting tips and still have the same problems.
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
Similar Messages
-
My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc
My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help
You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
http://support.apple.com/kb/TS1538 -
IPhone has 175 songs but iTunes says it has over 600 when plugged into computer
On my iPhone4:
In the Settings > General > About - My phone says it has 175 songs
When plugged into a Mac with iTunes my phone reports that it has 175 songs under the tab 'On This iPhone'
But, in the Summary tab, if you hover the mouse over the Audio area it says 665 songs.
My phone is nearly full and I think this must be the culprit because I don't store much on my phone. So I am trying to figure out if there is a Deleted Music folder somewhere? Why is iTunes reporting so much music on my phone.
I only have a handful of podcasts so that isn't it either.http://support.apple.com/kb/TS1538
-
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?
The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress -
with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.
Having same issue here:
https://discussions.apple.com/message/19043181#19043181 -
I just bought new computer and redownloaded itunes. Will it erase everything on my iphone when plug into the new computer?
Yes, it will.
Copy everything from your old computer, or your backup copy of your old computer, to your new one. -
IPhone will not charge when plugged into computer
My phone was not working, and so I took it to the apple store nearby. Here were the problems:
-error message saying "this device not made to work with iPhone"
-would not charge when plugged into computer OR wall charger
-person on other end of phone calls said i sounded really far away and had trouble hearing me
-when i shut it off, it restarts itself immediately
-cant do a manual reset holding the power and center buttons at same time
-when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
Is there any way they will replace my iphone at no charge?Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say. -
My iTunes does not downloads the latest software when I click check for updates or download latest version, a message appears "iTunes could not contact the iPod sortware update server because you are not connectet to the internet" even though I am connected, can some body help me?
If necessary, also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Itunes does not see my device when connected
As above when I plug iphone in, itunes does not see my device. i have repaired the itunes files. I have deleted all itunes files and re-installed and still no good.
When I do connect the usb to my iphone the computer bleeps three times in succession.
Has anyone got any advice as to what to do next?Try this... http://support.apple.com/kb/TS1495
-
i tried everything that was suggested. still cant get connected
Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Itunes does not identify old music contents on new computer -
I have moved "my music" contents from and old computer to a new one. Itunes does not recognize these contents.
How do I make them corelate?If you use automatic syncing, you must set up the iPod's Music tab in iTunes so that the selection of songs includes all the songs you want on the iPod.
Select the iPod in iTunes. There is a row of "tabs" (starting with Summary). Click on Music there. That is the Music tab, where you tell iTunes how to sync songs to the iPod.
To use automatic syncing for songs, Sync Music is checkmarked. You can choose to sync Entire music library, if it fits. Otherwise, you can choose to sync Selected playlists, artists, albums, and genres.
If you chose the latter, you create a selection of songs on the Music tab by selecting playlists, artists, albums, and/or genres. For example, if you want that new playlist, it must be checkmarked under Playlists. If you want to keep it simple, you can create a new playlist in iTunes and put ALL song you want on the iPod on that playlist (including that new purchased song). Back on the Music tab, checkmark that one playlist.
When you Apply the change, your selection of songs on the Music tab syncs to the iPod. If the iPod was not previously set to use automatic syncing, its existing content is replaced. Going forward, any changes to the iTunes Music library that relate to the selection of songs on the Music tab sync automatically when the iPod is connected, or when you click Sync. So, if you are syncing a playlist as your selection of songs, just update that playlist (add and remove songs), and the iPod gets updated with those changes at the next opportunity. -
I plugged in my IPOD today to sync but ITunes does not see it. Also I notice it's not charging. I restarted both the computer and the ipod. Not go. Any thoughts?
Hatter . . can I ask you a question on a different topic? Sorry to disturb but,
Does anyone have a minute to help me Boot my G5 from the CD, tried the C key but it still spits the disk
out and boots from Internet. Reset SMU battery and backed up all files on external HD. Have Firewire
hooked up MacBookPro, etc. just trying to erase HD and reinstall OS since I installed an older
version of MacOSXv10.2 (over what may have been a more recent OSX) and Nothing has worked
since!! Not even the Finder . . having trouble, would Really APPRECIATE any help!! Thanks, G
PowerMac, Mac OS X (10.2.x) , already backed up everything ExtHD
Correct Answer by MacGina on Oct 14, 2011 1:35 PM
Clarification . . it is the older G5 that I am trying to get going again. I have a software install disk but have machines CD drives have always been unreliable and I can't get the machine to boot from the install disk -
iPh 4s plugged into computer iTunes to update. When I came back to ck on it msg said ph not found. Ph showed plugin w/arrow pointing to iTunes symbol. Turned ph off/on but same thing on screen. It is frozen. Now what?
Additional comment from Carl 37: Phone is locked up with screen showing usb cable end with arrow to iTunes logo. What can I do to regain use of phone?
-
IPod does not respond at all when plugged in
Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
Here's a rundown of the computers I tested it with.
500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
515MHZ Dell running Windows 2000 (256MB RAM)
UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
------------------------------------------------------------------Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.
Maybe you are looking for
-
Can I directly communicate with an EnDat Sensor or do I need an interface?
We are using cRIO with FPGA and some DIO interfaces (NI 9411 and NI 9403). Until now we had incremental signals which are easy to detect with the DI module. But now we are have an absolute signal with this EnDat signal. Is there a way to add this sig
-
Hi .. is there a place that i can sell MBP spare parts like "keyboards" ??
I recentrly baught a MBP mid 2010 with an english keyboard ,, I want to change it with an Arabic/English keyboad ,, I dont want to use any covers or sticker on my keyboard as i want to get advantage of the backlitting feature which is awesome .. can
-
Skype for Business not updating icons on start menu - Using OCT for Lync 2013 deployment
We're currently deploying Lync 2013 to out fleet using the OCT to customize where the shortcuts are created. What we are finding is that the Skype for Business Patch does not update these icons. It only updates the icons if they are in the default l
-
Math.atan2 Code Explanation Help
Hello guys This is a piece of code from AS3 Making Things Move I tried to understand how this code works, but failed Please explain this code Thanks in advance
-
How To Free Up Memory (RAM) N95(ninety-five)
Does anyone have a sugestion on how to free up some ram, apart from closing running aps?