HT204306 can i restore my ipad4 without connecting to original pc i used for itunes

need help restoring my ipad 4

Sorry, For not being clear on my problem.  The phone actually does not stay on.  I get a home screen,like when the phone is asleep and you hit the home button and it wakes up and there is a slider to unlock.  Usually the slider is flashing. Mine does not flash.  The phone continuously freezes then restarts, then freezes,then restarts, then freezes, etc., etc.  I can not access the phone by any means.  That is why I inquired as to whether there was a special keystroke that will brick the phone.  None of the onscreen functions work, nor can I access the phone on a computer thru iTunes.  I also tried removing SIM card. No dice there either.

Similar Messages

  • Can't restore backup, I don'find the right format to use for date with RMAN

    Hi I would like to restore my database to a point in time but I can't because I am not able to find the NLS_DATE_FORMAT to use.
    I don't know how to alter the session parameters at the RMAN prompt
    I would like to restore to this time set until time 'May 10 2006 08:48:10';
    Can't some one just tell me how to use thise settings? Please it is urgent

    I am on Debian
    SQL> show parameter NLS_DATE_FORMAT;
    NAME TYPE VALUE
    nls_date_format string
    SQL> select sysdate from dual;
    SYSDATE
    10-MAY-06
    RMAN> sql "alter session set nls_date_format = 'DD-MON-YYYY HH24:MI:SS'";
    using target database control file instead of recovery catalog
    sql statement: alter session set nls_date_format = 'DD-MON-YYYY HH24:MI:SS'
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of sql command on default channel at 05/10/2006 10:21:44
    RMAN-10015: error compiling PL/SQL program
    RMAN-10014: PL/SQL error 103 on line 4 column 57: Encountered the symbol "HH24" when expecting one of the following:
    . ( ) , * @ % & | = - + < / > at in is mod remainder not rem
    => .. <an exponent (**)> <> or != or ~= >= <= <> and or like
    LIKE2_ LIKE4_ LIKEC_ between || member SUBMULTISET_
    For sure I am stupid but why is it so difficult to just set the time

  • IOS 8 lockscreen keyboard does not let me input characters with accent marks. My password has an accent mark. I can't restore the device without unlocking it and turning off find my iPod. What can I even do here?

    I do have a third party keyboard installed (fleksy), and I removed english and emoji from the keyboards list in settings before rebooting the ipod. When it booted up, it asked for my device password with the default keyboard, but I can't type any letters with accent marks, so I can't enter the password. I figured I could fix this by restoring a backup and changing my password, but I can't restore a backup without turning off Find My iPod - which of course requires me to unlock the device with the device password, which I can't do. Am I stuck here? Is there anything at all that I can do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        

  • Can I restore my phone without a computer?

    CAn I restore my iPhone without a computer?

    Yes. Tap Settings > General > Reset > Erase All Content and Settings.
    Be sure you have a network connection to your device.

  • How can i restore old backup without deleting my existing data

    how can i restore old backup without deleting my existing data. unfortunately i have deleted few of my old photos and restored them from my old backup. i got the deleted photos but lost my recent data and photos. how can i get those too.

    You cannot. However, if your back up is through iTunes on your computer and you do an internet search for something like "iPhone BackUpExtractor", I believe there is software that will help you access the SQL database that is your back up. You may be able to pull out what you need.
    Once you restore from a back up, any data that was on the phone is gone.

  • Mac OS no longer available after trying to remove Windows on Bootcamp. How can I restore Mac OS without the Mac HDD in options?

    Mac OS no longer available after trying to remove Windows on Bootcamp. How can I restore Mac OS without the Mac HDD in options?
    So what I did was, I had bought my iMac from a shop and asked them to do bootcamp for me. However, they installed 32 bit instead of 64. My fault, I did not make my self clear about it. So after it has been delivered to my house, I realized that I wanted the 64 bit. I tried to remove windows on bootcamp but honestly, I have not experienced this before. So I failed. I believe, I did something wrong.
    So I opened the iMac and it keeps asking me to go to windows. Windows OS also corrupted.
    I tried the Option Key but the only option is Windows 7 only. So using a different keyboard, I press option and it only shows Windows HDD and the Mac HDD has gone.
    What am I going to do? How can I restore Mac OS without the HDD anymore?

    iMac, Mac OS X (10.7.2)   < your profile
    Try using Lion Recovery

  • Can I update iOS 5 without connecting to PC?

    Can I update to ios5 without connecting to PC?

    No. Wireless updating is only available after you upgrade to iOS 5.

  • HT201263 How can I restore my ipod without erasing everything??

    HOW CAN I RESTORE MY IPOD WITHOUT ERASING EVERYTHING?

    You cannot.
    That is what a restore does.  It erases everything and reinstalls the ios.
    If you are using the ipod as designed then everything is on your computer, so you can resync everything,  and you can restore from your backup to get the settings back.

  • Can airport express boost signal without connecting to 3wire bigpond router?

    Can airport express boost signal without connecting to 3wire bigpond router? just via wi-fi?

    The Express would not sit with the bigpond router......it would need to be located in the area where you need more wireless signal coverage.
    Assuming that you have an open available Ethernet port on the bigpond router, you can use that to connect the Ethernet cable to the Express and locate the Express where it is needed in a remote location.

  • If i have backup phone up to icloud can i restore factory setting without losing apps

    if i have backup phone up to icloud can i restore factory setting without losing apps

    icloud backup and restore http://support.apple.com/kb/HT4859
    you can always sync back your purchased apps via itunes or on the phone itself.

  • Hello, I have an iPod touch 4 generation. I have a problem that my PC is broken and I later forgot my password. How can I restore the system without a PC. Because I have receipts from the rest because I POD and

    Hello,
    I have an iPod touch 4 generation. I have a problem that my PC is broken and I later forgot my password. How can I restore the system without a PC. Because I have receipts from the rest because I POD and

    You need a computer with iTunes installed to regain use of your iPod.  Unless you have the iPod backup file from the syncing computer all you can do is to restore the iPod to factoery defaults/new iPod.  You will also need to place the iPod in recovery mode is you restore the iPod on other than on its syncing computer.  For reoverymode see:
    iPhone and iPod touch: Unable to update or restore
    Remember the passcode is a security feature.

  • I bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
    See the Activation Lock FAQ for what you and they need to know.

  • How can i reboot my mac without lion cd previous owner installed it thru itunes?

    how can i reboot my mac without lion cd previous owner installed it thru itunes?

    Lion is usually installed through the App Store not through iTunes. There is no Lion CD. If you need to perform activities normally requiring an installer DVD, then you do it as follows:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    This will boot the Recovery HD and present a main menu of options such as Reinstall Lion, Restore a Time Machine backup, and run Disk Utility to repair the hard drive. There are additional options in the Utilities menubar item.

  • Can I restore my info to a new iPhone 6 plus using a backup of an iPhone 4s running iOS 7.1.2?

    Just bought a new phone and want to import all my app settings and information. I have heard all the complaints about iPhone 4s running iOS 8 and don't want to update until I have it preinstalled on a new 6+.
    Can I restore my info to a new iPhone 6 plus using a backup of an iPhone 4s running iOS 7.1.2?
    or would I have to upgrade my 4S to iOS 8, backup, and then restore the new phone. I need to ensure that my 4S powers on and works so I can receive trade in credit for it (~$200), so this is worth a bit to ensure that my 4S stays functional.
    Thanks

    You can load a backup from an earlier iOS version onto a device with a later iOS version, but not the other way around.
    If you're going to do this, I'd recommend doing a backup of your 4s to your computer (not iCloud) and load the backup onto the 6+ from the computer.  You can try an iCloud backup/installation, but also do a local backup in case something goes wrong. A local backup is more comprehensive than an iCloud backup, and in my experience it loads more reliably.

  • My iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging as well, bit confusing

    my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please

    Take a look at this link, http://support.apple.com/kb/TS1538

Maybe you are looking for

  • Can you do Digital In or Out on the same port (byte) as PFI timing?

       I'm using an M series board with three digital ports.  Port 0 is only for DIO, ports 1 and 2 can be used for DIO or PFI (e.g. clocking, triggering).  My question is:  can I do both DIO and PFI functions on any one port.  For example, on Port 1, I

  • CONNECTING AIRPORT EXTREME TO NON APPLE ROUTR

    Hi I have just upgraded my broandand from NTL cable to BT ADSL. My emac(in the bedroom) use to be connected to my cable modem and Belkin Router however as the BT line is in the living so is the BT VOYAGER wireless router which can connect to my power

  • BEFW11S4: Windows XP will not recognize my SSID network

    I have a BEFW11S4 router with firmware version 1.5.10. I am using Windows XP Pro w/ SP2. I am using an IBM R52 laptop with a non Linksys wireless card. In the past, I was able to just do this: http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/endus

  • XI Table- Lockbox/ payment posting

    Dear SAP Guru's, I am working on mapping XI table back to Legacy system of Lockbox payment posting and I cannot get a 1 to 1 relationship.  When I looked closer, it appears that among other things, I have multiple postings for the same check.  This a

  • Weblogic 9.2 webservice client getting ClassCastException XmlTokenImpl

    Hi, I have written a webservice using the JAX-WS notation and Weblogic 9.2 MP3 libraries. I generated the server using jwsc and the client using clientgen. The server is working fine. But whenever I used the generated client stubs, I am getting this