HT204306 My Ipad does not reboot after the last update, I tried the reset mode and that didnot work . All I get when turned on is the apple icon. Help Please?
I have and Ipad Model A1458 and serial number DMPJVX72F183 I did the last update 8.1 and since then I can not get it to work. The apple icon comes on then fades and then comes back then fades , this continues until I turn it off or the battery run died. I tried the reset but that did not work. Any suggestion?
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.
Similar Messages
-
My iPhone is frozen. It was working find about a hour ago and then for no reason the screen went to the apple logo. I have tried to reset it and that doesnt work. When I press the power/lock button and the center key it turns off but then it comes right back to the apple logo screen and wont go any further. Please help I dont have my stuff saved and would like to keep the stuff i do have on it!!! Every once in awhile the screen will go black for a few seconds then the apple logo pops right back up! I dont know what to do.....
Try to set it up as new device, explained here:
How to back up your data and set up as a new device
First without using the backup, in case it contains corrupt data.
If it works after that, use the backup to restore from. -
Please fix the missing website detail pics in the tab bar.
== This happened ==
Every time Firefox opened
== Last update a few days agomikeporter wrote:
I'm sorry I'm not aware of any "cumbersome" subpanels - unless of course you don't know what you're doing. There is this wonderful invention called a "subVI" that can be used to organize and simplify your code, or are they too "cumbersome" as well? You should really learn a bit about what you are pontificating over before you start running off at the mouth.
Mike...
I didn't want to step on your toes. No need to get personal.
Subpanels make some additional code necessary that hasn't got to do anything with the actual program. And I AM using subIVs as I wrote in my first post, which is exactly the root of the problem.
Nevertheless I now solved it in a way that comes close to what I wanted. I don't know if some of you meant your suggestions to be understood that way (at least I didn't ). The subVIs will now "insert" themselves (via invoke node) into a subpanel on the main vi, which they are given a reference of at call. This adds minimal aditional code, especially on the main VI which I want to keep as clean as possible. By clustering the panel reference into the parameters the subVIs are already given (not used in the example I attached below), there isn't even a change on the terminals of the subVIs.
I got to check now if this works well with event structures within the subVIs or if it can create the same problems like multiple event structures within a single VI.
So no global variables anymore and no writing values by property node. I don't know if this just wasn't possible in previous Labview versions I had a try at that (I guess it was 8.6 and/or 2009) or I just didn't come up with the idea back then.
And if the text wasn't that helpful, here are two screens:
Parent VI:
SubVI:
Attachments:
main.png 2 KB
subvi.png 5 KB -
Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?
Did you purchase the software in another country than where you live?
-
The airport utility does not find my Airport Extreme. I tried to reset the base, but I can`t make it. What can i do?
Please perform a Factory Default Reset exactly as follows:
Pull the power plug from the back of the AirPort Extreme (AEBS)
Wait a minute
Hold in the reset button first and continue to hold it in for at least 7-8 more seconds while you simultaneously plug the power back in to the AEBS
Release the reset button after the 7-8 second hold period
Allow 30-45 seconds for the AEBS to restart
Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the AEBS
Open AirPort Utility to see if can now see the AEBS -
IPad does not show on latest iTunes update
iPad does not show on latest iTunes update. Suggestions?
Hello Dave,
Sorry to hear that your iPad is currently not recognized by iTunes. I found an article with steps you can take when you experience an issue like this. I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Can anyone help?
That screen means it has gone into recovery mode. You need to connect to a computer running iTunes by following the instructions in http://support.apple.com/kb/HT1808 for the procedure of recovery mode connection.
-
macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no hash key appears that will allow me to type in: fsck -fy
have my trials for IB in one week and my history notes are all on my hard drive, that has not been backed up. help please =(macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no hash key appears that will allow me to type in: fsck -fy
have my trials for IB in one week and my history notes are all on my hard drive, that has not been backed up. help please =( -
My ipod touch wouln't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and and an empty loading bar. Please help. Thank you.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
What happened to the nifty "sync" button in iTunes? It syncs as soon as I plug it in, and that's great! BUT! When I go to the iTunes Store and buy new stuff, I can't just 'sync' the device again so my new stuff gets added. Why?
Nothing happened to it.
It is still there. Maybe it says apply now, not sure, but it is still there. -
Since the last update my i tunes wont launch it just give error message Error 7 (Windows error 127) how do i fix it please?
Like many others I have been reading about online I am having the same error. I tried the fix listed above and simply wasted 30 minutes of my time. I scheduled a time for Apple to call and help me through this and their solution was for me to call Microsoft for some reason?!! iTunes made me upgrade then stopped working - I really don't see how this is a Microsoft problem??
Like Darren if a solution is not found quickly I will also have to sell my phone as the only way to get videos and music on my phone is through the software that you made me upgrade, broke and won't help me fix. -
hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?
bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
What I should do now?Something has gone wrong. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new". -
TS3274 iPad does not start after the latest software update
After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.
If the reset doesn't work, force iPad into recovery mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Since the last update to Firefox, I have had crashes non stop about every ten minutes or so, with very typical use. The update SUCKS and is crashing computers. I am SURE I am not the only one. PLEASE FIX THIS ASAP. I have been a Firefox user forever, but now going to Chrome and Explorer until I hear from you about fixing this issue. Never before have I had this problem with Firefox. Bums me out. But I can't deal with the constant crashes and it is ABSOLUTELY since the last update a day or two ago.
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.
Maybe you are looking for
-
Making selection filed in infopackage mandatory
Hi all I have a requrement to make selection fields in an infopackage mandatory. Is there any way we can acheive this!!! Thanks in advance jP
-
PDFs from CS3, ligatures not showing up on editor's PC, fonts appearance changed
Hi there. I just redesigned a magazine using the Hypatia Sans family, Avenir family and Arno Pro family. Avenir is the one font I have been using. With both Hypatia and Arno, the ligatures totally drop out of the pdf when viewed on a PC. And, when th
-
Definition of various colours in project info
The Project Info shows Bar Charts in three colours, namely green, yellow and red. I guess the green and red are selfexplanatory, but what meaning is attached to the colour yellow? Hank iMac 20 G-5, 768 of RAM; 12 PowerBook G-4, Matrox 300 GB, Sony HC
-
When I download CC it comes in the Dutch version not in English
Even though I have selected English as my preferred language when I try and download CC it comes in Dutch! What is going on?
-
I have setup a replication group with 4 nodes (1 master, 3 replica nodes). 1. When there is a failure in current master node, the election is triggered. Is it possible to specify which replica node should be selected as next master either programmati