HT204368 I have a blueant Q2 bluetooth. Previously I had a Plantronics, and a Jawbone. All three headsets use up the battery in 4 to 5 1/2 hours. Actual talk time only about 5 to 10 minutes maximum. What might cause this.
My bluetooth battery dies in approx. 4 - 5 hours. it's supposed to have 5 hrs talk time, 100 hrs. standby. At the time it dies I've only used about 5 -10 minutes of actual talk time. This is the 3rd bluetooth that has done this. I could use some help here. Thanks.
Hi,
I don't have the same problem as you but I know how to conserve energy battery. Don't pay $49 extra service as it is a waste of money. They don't do much and most likely at last they will tell you to contact your carrier and worst of all you need to send in your phone to have it check out. It is a waste of time and they will give you a temporarily use phone that may not be a smartphone and worst of all you have to a fee and a deposit to use the temporarily phone. It is not fair. Don't you agree that the Carrier and Blackberry should pay for the issues? Why does the customer have to pay for it? It is not fair and there is no logic to it. the $49 is just for Blackberry to make more money to increase their bottom line in my opinion. What ever the reason it is, it just does not feel right for the customer to absorb the cost. Afterall, the customer did not cause the problem. Right? Then, why does the customer have to pay for an issue, which customer did not cause? why and why? It all comes down to one logical conclusion. Blackberry is not act on the Customer's best interest. To me, it seems like th bottom line and profits are more important than the customer needs. WRONG WRONG WRONG AND WRONG BELIEVE. Without the CUSTOMER, there is no BLACKBERRY. It is that simple.
Here is how:
1) Don't over charge the phone. Once the phone charge. Unplugg the the charger and let the battery drain until the last bar in yellow shows.
2) watching too much videos drain the battery. Be aware of it
3) Turn off all application you don't use, Facebook, Linked in for example. Just sign out.
4) Change the display intensity to minimum
5) vibration mode and call sound drains the battery quickly. Choose sound mode only.
Similar Messages
-
THe error box says procedure entry point not found....then a string of code that "could not be located in the SoftwareUpdateFiles.dll".
I'm try to update my software so I can sync my iPhone with my current iTunes library.
any help greatly appreciated.Let's first try a repair install of your Apple Software Update.
In your Add or Remove Programs control panel, select Apple Software Update, click "Change" and then click "Repair".
Does the repair go through okay? If so, try another iTunes update. Does it install properly this time? -
What might cause this problem?
You may have an app that is trying to update or download that needs the password to continue... once you enter it it will time out so you don't have to worry about putting it in.
Enter it and it should store it for 15 minute only and after that time you'd need to enter it again to buy something.
Updates do not require password anymore but purchases do -
HT203164 I am getting an error 2131, attempt to burn a disc failed. What might cause this?
I am getting an error 2131, attempt to burn a disc failed. What might cause this?
Maybe you should post in the iTunes forum or other appropriate forum. This is the iPod touch forum and the iPod can't burn CDs.
-
I have an 1phone4s, my wife has an iphone 5c and an iPad; when someone calls, all three equipments ring at the same time??????
try
settings>>>facetime >>>iPhone mobile calls >>>off -
The new VM is being created via a P2V process run from SCVVM. It reaches a completion of 60% and dies. I asked about this in another question detail of the VVM can be seen at this link:
http://social.technet.microsoft.com/Forums/en-US/virtualmachinemgrp2vv2v/thread/71aae7dc-13b5-46f1-b794-cc1b8085541f
Running Win2008 R2 w/ Hyper-V role enabled & SCVVM 2008R2
In any event I checked the Hyper-V logs to see if they might shead any light on the problem and there were two error messages associated with the attempted conversion. The first Event ID 3430
Log Name: Microsoft-Windows-Hyper-V-Worker-Admin
Source: Microsoft-Windows-Hyper-V-Worker
Date: 5/23/2011 4:51:25 PM
Event ID: 3430
Task Category: None
Level: Error
Keywords:
User: NETWORK SERVICE
Computer: Virtual-Mgt.amrinc-corp.local
Description:
'test1' failed to set/change partition property: The system cannot find message text for message number 0xtest1 in the message file for 18568CA2-82E9-4A9F-B462-701D8FB4C447. '0x8007013D'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>3430</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
<EventRecordID>1</EventRecordID>
<Correlation />
<Execution ProcessID="3316" ThreadID="2716" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>Virtual-Mgt.amrinc-corp.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>test1</VmName>
<VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
<ErrorCodeString>%%2147942717</ErrorCodeString>
<ErrorCode>0x8007013D</ErrorCode>
</VmlEventLog>
</UserData>
</Event>
And the second Event ID 3040
Log Name: Microsoft-Windows-Hyper-V-Worker-Admin
Source: Microsoft-Windows-Hyper-V-Worker
Date: 5/23/2011 4:51:25 PM
Event ID: 3040
Task Category: None
Level: Error
Keywords:
User: NETWORK SERVICE
Computer: Virtual-Mgt.amrinc-corp.local
Description:
'test1' could not initialize. (Virtual machine ID 18568CA2-82E9-4A9F-B462-701D8FB4C447)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>3040</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
<EventRecordID>2</EventRecordID>
<Correlation />
<Execution ProcessID="3316" ThreadID="2716" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>Virtual-Mgt.amrinc-corp.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<VmInitialize xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>test1</VmName>
<VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
</VmInitialize>
</UserData>
</Event>
I have blownout the server and reinstalled the operating system and SCVVM and applied all the current updates to no avail. I have the exact same issue again. The problem seem to be at least on the serface an authority problem because I have no problem creating
new VM via the P2V process on an old Virtual Server running on Win2003R2.
Oh yes I can create new virtual machines on the system in question and move them to the library as was suggested to verify in a Blog post so I am really wondering what the problem is?
Configuration Analyzer Just gave me a warning about reporting not being setup on the VVM which it isn't so no suprise there?
Any information that might help me figure this would be greatly appreciatedI've looked at both threads, and there simply isn't enough information for me to tell you what is wrong. Please collect a trace (instructions in General forum) and open a case with CSS. CSS can provide more in depth analysis than what a forum
post allows.
As a shot in the dark, I have seen the issue outlined in the following KB article cause this exact same error message and symptom,
http://support.microsoft.com/kb/967902
Best Regards, Mike Briggs [MSFT] -- posting provided "AS IS" with no warranties and confers no rights -
What might cause this cross version, & cross platform inability to edit PDF?
Basic info: Our office is PC based using WIndows XP and Acrobat Pro 7.0 and I have created a simple PDF that is totally unrestricted to a book publisher. Latter is MAC based using X Pro and is able to open and move around our PDF, but is unable to use highlighter, comments, edit, etc. Publisher works with PDF files alot and claims that they have never had problems with any other submissions. The only "unusual" think I did in creating the PDF of a simple word doc is that in Acrobat Pro 7 I changed Initial View tab that File Title should display rather than the default file name; and in Properties filled in Title and Author fields. My hunch is that this simple change might be causing the symptoms being experienced.
While I am primarily looking for a solution, without trying to determine the cause it seems tougher to find solution other than trial-and-error.
Details: PDF does NOT have any interactive features and is 99% text with a few inserted JPG images. I realize in writing this there is another perhaps unusual aspect. Namely, we are still using MS Word 2003, AND we always make a copy of normal.dot, rename this to book_title.dot and have the word doc file for the book use that _____.dot so that in this way, the Styles that use and update are isolated to that particular book and its associated word.doc. I mention this, but don't think this is the culprit.
The steps in the whole process have been:
1) Close word doc for the book.
2) In Acrobat Pro create PDF from word.doc file
3) Make changes to Initial View, and Properties
4) Save PDF using Pros "Smallest File Size" choice.
In our office, we have opened a copy of the PDF sent to publisher in Adobe Reader and all looks "normal." We have opened it on a stand alone laptop (not connected to our server) and with Acrobat Pro 7 we are able ourselves to use highlighter, comments, editing, etc.
This really has me stumped. To add potentially further challenge with "compatibility" our office and publisher are in USA. Publisher needs to add some comments to the PDF file and then it will be sent to several different people in Europe to use the PDF file to make a translation of the book, and we have not even tried that step yet.
Since our office is 7.0 and not X, am I correct that the latter still allows one to create PDF and have Initial View show pdf Title rather than pdf File Name?
Your thoughts/suggestions are greatly appreciated.@BillI I agree that it is puzzling. I think that @George has the answer and solution, unfortunately publisher will not look at things until this coming Tuesday so can not yet mark his post as "the correct answer" and be done with all of this craziness.
============
After writing above, I tried to learn some basics about PDF/A and now have some additional ?s to understand and unravel this puzzle fully.
1) PDF/A is a newer "more robust" pdf standard, right? In creating PDF file in Acrobat Pro 7.0, is there actually an option to check box that you want the conversion to meet this standard? In creating the PDF that has been problematic for publisher to edit, I, as the author, did NOT intentionally create a PDF/A file.
I did embed fonts (which for this document were kept to Times) to increase compatibility.
I did NOT restrict the PDF file i.e. Printing, Commenting, etc. were allowed.
It was also created as a Tagged PDF
I believe it is true that the extension .pdf does NOT tell you whether a file is PDF/A. You need to look at the properties of the actual file, OR with more current versions some Adobe products there is a color bar that would let you know.
2) If @George has the solution, I am delighted but still has me puzzled. If I did NOT actually create a PDF/A file, could the publisher themselves have done this in their MAX Acrobat X software, and then locked themselves out from using it? Let me try to explain ...
A) I sent PDF file, that we ourselves are able to edit in Acrobat Pro 7.0 on a different workstation from what had created the file in the first place. However 7.0 does not have the user preference that @George refers to.
B) Publisher opens original PDF file and then does a SaveAs, so that they would preserve what I had sent as an original. Can they have their MAC Acrobat X setup with predefined job options that would automatically create a PDF/A file? If yes, then even if I as the creator had not made a PDF/A file, the publisher (downstream) had done this with their SaveAs step. Then thereafter because of the setting that @George points to, they had locked themselves out of editing things.
======
I appreciate anyone who tries to add clarity to this. I think I had already mentioned in one of my posts, that solving this between us and Publisher in just the USA is only the first set of steps in this chain. The PDF file that publisher will add comments to, will then be sent to Europe to someone who is translating the book, and I have no idea of what operating system nor what version of Adobe they are using (and they might even be using Adobe).
Even if @George has solved the problem at the level of the Publisher, I expect that for the entire workflow that everything should be kept as a plain and simple PDF file, and have nothing in PDF/A "mode." For the current use we are not really trying to create a more archival storage of the content and appearance and so it seems that PDF/A has no advantage AND is creating some "compatibility" and usage problems. -
What might cause this execption?
trying to run a simple client, almost stright from the Axis User Guide and I get is error every time. It has no problem building the program but running it is another story. What might be causing it?
//simple client
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class TestClient {
public static void main(String [] args) {
try {
String endpoint =
"https://server.com";
Service service = new Service(); // this is line 11 from exception
Call call = (Call) service.createCall();
call.setTargetEndpointAddress( new java.net.URL(endpoint) );
call.setOperationName(new QName("server.com", "Login"));
String[] ret = (String[]) call.invoke( new Object[] { "1000005", "1111" } );
System.out.println("Sent Message, recieved :");
for(int i = 0; i < ret.length; i++){
System.out.println(ret);
} catch (Exception e) {
System.err.println(e.toString());
Exception in thread "main" java.lang.NoClassDefFoundError: org.apache.commons.lo
gging.LogFactory
at org.apache.axis.components.logger.LogFactory.class$(LogFactory.java:4
5)
at org.apache.axis.components.logger.LogFactory$1.run(LogFactory.java:45
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.axis.components.logger.LogFactory.getLogFactory(LogFactory
.java:41)
at org.apache.axis.components.logger.LogFactory.<clinit>(LogFactory.java
:33)
at org.apache.axis.handlers.BasicHandler.<clinit>(BasicHandler.java:43)
at org.apache.axis.client.Service.getAxisClient(Service.java:104)
at org.apache.axis.client.Service.<init>(Service.java:113)
at TestClient.main(TestClient.java:11)it's in there.... still does not work.. uhm...thanks for the idea thoguh
You don't set a CLASSPATH with Tomcat. It ignores
your system CLASSPATH if you have one, so if that's
what you mean by "in there", that's not helping you.
You need to find the JAR with that .class file in it
and put it in TOMCAT_HOME/common/lib. That way every
context running on that Tomcat server will see it.
If that's what you have, then I don't know why you're
getting this error.
%He's beyond that - just didn't have commons-logging.jar, now he does.
OP - I don't know about your next problem, but it's only a "warning" - looks like if you're not trying to do attachments with the API, you'll be fine. Otherwise, apparently you'll need some J2EE jar in your run-time classpath - is that happening on the client side, or the server side (shouldn't be the latter, as it is running in a J2EE container, so I wouldn't expect it to complain about not finding those classes) -
What might cause this ftp put error?
In JCAPS5.1.3 I got an error:
FtpFileClientImpl.put(): No connection is available. The ConnectionEstablishmentMode is [Automatic].
Unforunately any stacktrace is lost. Can anyone give some hints as to why the automatically connecting connection wasn't available?
thanks
Rohanit's in there.... still does not work.. uhm...thanks for the idea thoguh
You don't set a CLASSPATH with Tomcat. It ignores
your system CLASSPATH if you have one, so if that's
what you mean by "in there", that's not helping you.
You need to find the JAR with that .class file in it
and put it in TOMCAT_HOME/common/lib. That way every
context running on that Tomcat server will see it.
If that's what you have, then I don't know why you're
getting this error.
%He's beyond that - just didn't have commons-logging.jar, now he does.
OP - I don't know about your next problem, but it's only a "warning" - looks like if you're not trying to do attachments with the API, you'll be fine. Otherwise, apparently you'll need some J2EE jar in your run-time classpath - is that happening on the client side, or the server side (shouldn't be the latter, as it is running in a J2EE container, so I wouldn't expect it to complain about not finding those classes) -
Here's a screen cap of what I normally see: http://i41.tinypic.com/4tq52a.jpg
I can see websites that appear like that on Chrome as they should appear, but for some reason Firefox gives me all of that mess. It happens a lot on blogs, if that makes a difference. Also, I tried disabling my add-ons, but to no avail. Anyone got any ideas?That is a font problem. Firefox can't find the font and shows little boxes with the hex code instead.
Try to set the pref <b>gfx.font_rendering.directwrite.use_gdi_table_loading</b> to false on the <b>about:config</b> page.
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean) -
I get the message "Charging is not supported with this accessory" or just no connection at all.
I downgraded flash to 10.3 and it fixed the problem. Everything works fine now. I suggest everyone do this until Adobe releases a fix for 11.7.
-
When I play an instant view movie, I get an all black window with no loading cues. Window doesn't change.
Mac OS 10.6.8
Firefox V 9.0.1 (currently up to date)
Safari V 5.1.2
Silverlight (latest version, recently upgraded. Main problem started after upgrade)
Prior to upgrading to the latest version of Silverlight, the show I played skipped, the video was missing and the audio played, or the video just froze. This led me to upgrading the plug-in, after which I couldn't play anything in Firefox.Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
-> Video or audio does not play
* http://kb.mozillazine.org/Video_or_audio_does_not_play
Check and tell if its working. -
How long should it take to recharge iPad 2 battery from power outlet?
Presuming you're using the iPad power brick and not an ipod's or other 5W one, 8 hours give or take (i do it overnight so I honestly can't give an exact answwer. ANd it also depends on how low it was when you started.
Do you get a 'not charging' up by the battery meter? -
Unable to access endpoints error. What might cause it?
I got the below error
“Unable to access the following endpoint(s): https://secure-ausomxdsa.crmondemand.com/Services/Integration”
I copied and pasted the below url into a browser and I got the “Page Not Found” error
https://secure-ausomxdsa.crmondemand.com/Services/Integration?wsdl
Do you know what might cause this error?
ThanksHi, ok now I see, no you don't if you use bpel, but anyway the ?wsdl url is not reachable in on demand. Url https://secure-ausomxdsa.crmondemand.com/Services/Integration is right if you are on pod "dsa". I'm not that familiar with bpel but as far as I know it's simply loading the wsdl into your bpel process and use WS-Security for server side session handling. If you don't send security headers you have to define a login step first but normally this is not necessarry if you add ws security header in your requests.
Best Regards
SL -
After installing Snow Leopard on MacPro with 23" HD monitor I have noticed an anomaly when scrolling up or down, a horizontal ripple appears briefly, I have tested other browsers and there is no problem, only in FF 8. What is causing this?
Hi applecore_eater,
When Leopard came out, machines were shipping with Tiger for 3-5 months after it's release. So the fact that you bought a machine with Leopard still installed is not uncommon, especially considering we're not even a month into release. Matter of fact, I'd be surprised to see a lot of machines (unless CTO) that are coming with Snow Leopard.
The battery issue is not specific to Snow Leopard or the MacBook Air. I've deployed SL to about 15-20 MacBook Airs and all of them have been perfectly fine (batteries).
Maybe you are looking for
-
HT1495 how to use multiple apple id's with a single itunes account
I am looking to set up two iphones and a two ipads (one for me and one for my fiance) to a single itunes account to allow us to load music and apps from the same itunes account but be able to have seperate accounts for facetime on our phones and ipad
-
Can i use the same payment info on more than one iphone?
Can i use the same payment info on more than one iphone?
-
Special characters (norwegian wovels) not showing correctly in Page Layouts
We have a publishing site which surfaces content from several catalogs in an authoring site in a cross site collection publishing environment. We have a problem with labels for Catalog-Item Reuse Snippets containing norwegian vowels/special character
-
How can I change the default value in IT0009?
Right now in our system when we create a new IT0009 entry, several fields are defaulted such as the payee name, bank country, and currency (field WAERS). But in table T588Z I can not find anything defined for IT0009. Now even I create entries in T588
-
Should I match STD preview size to native screen resolution or the resolution I am actually using?
My iMac 27" monitor is 2560 pixels wide but I run it on a screen resolution of 2048 x 1152. Would it be a waste for me to set the Lightroom Standard Preview Size to size to the setting of 2880? I am thinking I should set the Standard Preview Size to