HT204368 what's the factory setting PIN on a new IPhone 5?

Can somebody please tell me what the standard 4 digit PIN number is on a new IPhone 5 when trying to connect to my car through Bluetooth?

They should.
You can check your warranty status, just as they will.
Check Your Service and Support Coverage: Apple - Support

Similar Messages

  • What is the factory setting pin code for my ipod touch?

    im looking to make a purchase in app on my ipod touch and i need to switch off the restrictions under general settings. in order to this i need the pin code which is 4 digits. this must be factory set as ive not set it previously.
    thanks

    A: what is the factory setting pin code for my ipod touch?

    There is no default setting. You have to set the passcodes. If you cannot remember them, then see:
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
    Verify that you are using the latest version of iTunes before attempting to update.
    Connect your device to your computer.
    Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
    Select the Summary tab.
    Select the Restore option.
    When prompted to back up your settings before restoring, select the Back Up option (see in the image below). If you have just backed up the device, it is not necessary to create another.
    Select the Restore option when iTunes prompts you (as long as you've backed up, you should not have to worry about restoring your iOS device).
    When the restore process has completed, the device restarts and displays the Apple logo while starting up:
    After... [Show more]

    Read other 6 answers

  • What is the factory set password for the administrator for a macbook pro 13" retina display?

    what is the factory set password for the administrator for a macbook pro 13" retina display?

    Welcome to Apple Support Communities
    Macs don't come with a password. You have to set up the password during the initial setup. If you have forgotten your password, follow these steps to reset your password > http://discussions.apple.com/docs/DOC-4101

  • What is the factory setting for the Brightness Control?

    Hi. I'm calibrating my monitor and I have to set the Brightness Control back to the Factory Setting. Does anybody know what the factory setting is? Thank you!

    That may still be too high. The brightness is really cranked up on monitors these days. I doubt even at the minimum setting if you can get to the recommended luminance of 150 cd/m².
    This link might help you determine the best setting. As you are adjusting the brightness up and down, you might see a subtle difference; a lot depends on the capabilities of the monitor.
    http://www.drycreekphoto.com/Learn/Calibration/monitor_sensitivity.html

  • What is the factory set restriction passcode? I need to erase all content and settings on my handset as I have just upgraded to 4S and need to wipe my old handset off all content.  It keeps asking for a passcode even though I never set one. Thanks

    Restrictions passcode for iPhone 4. I need to erase all content and settings for handset

    There is no factory set restriction code. If you need to completely reset then follow the instructions you find here:
    IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Please Get the iPhone User Manual for iOS 5

  • What is the factory set passcode for iPhone 4s?

    Hi Everyone. As far as I know, I have never set a passcode on my iPhone 4s.
    I do have a passcode for when my phone goes to sleep, but when I go to Settings/General/Restrictions, my passcode does not work. I always get the Try Again in 60 Minutes message.
    Any hints?
    Is there a factory preset passcode that I need to know about?
    Thanks in advance.

    There is no factory set passcode.
    The restrictions code can be different than the home screen passcode.
    If you forgot the restrictions code per iOS: Understanding Restrictions (parental controls) you will need to perform a factory restore: Use iTunes to restore your iOS device to factory settings
    If you forget the home screen passcode: iOS: Forgot passcode or device disabled

  • What's the best way to add a new iphone to family itunes?

    We just bought a second iphone for my wife.  It was set up with her own apple id.  It looks like the family sharing for itunes requires a common apple id.  What's the best way to share the family music library with her new device?
    Thanks

    Hi,
    I would suggest looking into some javascript samples to insert within your site. 
    Ex: http://www.mortgagecalculator.org/free-tools/
    Kind regards,
    -Sidney

  • What is the quickest way to get a new iPhone swapped for my current iPhone?

    Hello all,
    I'm in search of a solution for my parents. The conundrum is this:
    Parents have a pair of iPhone 4 8GB picked up for free on contract back in 2010 from Verizon Wireless.
    They're interested in the new iPhone (6) and would like to get replacements for both. Issue is they don't want to pay. They want it "free" just as they did the first time.
    Everyone has a decent idea about the carriers offering up to $200 for working iPhones from 2010 and later.
    My parents do not want to be without their iPhones for any amount of time so they have ruled out Verizon's ship your old phone, let us confirm it's a working iPhone, and then wait for us to give you a virtual gift card for use later. Reading their small print states this could be weeks.
    From what I was hearing AT&T was offering the $200 upgrade in brick & mortar stores, essentially allowing customers to walk out with a "free" iPhone 6.
    My parents do not want to switch carriers.
    Does the Apple community have an viable tips, suggestions, or comments regarding my parents situation? Any feedback is greatly appreciated as every option I've brainstormed with them results in a time loss.
    They do not have back up phones to take the place of their current mobile devices and I don't believe they would want to issue themselves temporary throwaway phones, like a Tracphone. With that said... what do you think?

    Trade-in: The trade-in value for an iPhone 4 with only 8GB will be minimal, but you may be able to get some credit through Verizon Apple. Those phones through Apple result in about $35 credit if in great working condition. AT&T is offering up to $200. I can tell you from experience you won't get $200 for an 8GB iPhone 4. We received $100 for a very good condition 4 with 16GB of RAM at AT&T.
    Verizon trade-in: https://www.trade-in.vzw.com/home.php5?c=en-us
    Apple trade-in: http://store.apple.com/us/iphone/reuse-and-recycling
    New phone: Generally the only "free" iPhone on contract is the bottom-end one, which is the iPhone 5c at the current time. It is important to note that that phone is limited in terms of lifespan (won't likely get OS updates after next year).
    That said, most US carriers are moving away from, or financially discouraging, completely subsidized phones towards monthly subsidized phones. The iPhone 6 is generally $199, iPhone 6+ is $299 on contract in the US, regardless of carrier.
    You can walk out of a Verizon store (or AT&T) with a "free" iPhone 6, but you'll be paying for it monthly (~$27 for a 6, $31 for a 6+) over the two year timeframe instead. If they absolutely don't want to spend anything out of pocket but want a 6 or 6+, that's about the best they'll be able to do.

  • Hello! What's the whole process in getting a new iPhone 5 charger?

    Well, just so recently my iPhone 5 charger had stopped working , it doesn't recharge at all..
    I thought it was dust in my phone, but it's not..
    So I wanted to know the whole process to exchange my charger,
    my warranty did not expire yet , but I'm pretty new when it comes to my phone..
    Do I just go to any Apple store and ask for an exchange in my charger?
    What do I need to bring (if anything)??
    What do I ask for?
    How does the process go?
    ( Sorry if this question seems stupid, I'm just looking for a very descriptive answer to specific questions)
    Thank you!

    They should.
    You can check your warranty status, just as they will.
    Check Your Service and Support Coverage: Apple - Support

  • What are the first steps when getting a new iPhone?

    I want to make sure I do everything right...any tips on how to begin then proceed?  Thank you!

    Step 1: Walk into store.
    Step 2: Ask Gentleman on buying Iphone
    Step 3: Choose between iPhone 3gs, 4, 4s, and 5,
    Step 4: Choose between factory unlocked(full price) or substidized price($200)
    Step 5: Choose Carrier
    Step 6: Select a plan from that carrier
    Step 7: Buy and other bells and wistles for your iPhone. (optional)
    Step 8: Walk out with new phone.
    Step 9:

  • HT6154 What is the factory iPhone 3GS pin code?

    What is the factory sim pin code for a iPhone 3GS?

    There is none. If you have a SIM PIN, contact your carrier.

  • HT201210 my iphone is now in recovery mode... how do i set up as a new iphone?

    i got my daughter an iphone and she used her old itunes acct and now it turned her iphone into something like an ipod touch. It is now in recovery mode and was wondering now what? can she set up as a new iphone?  my internet connection ***** right now to download the new iphone software...

    she can set it up as new she connects it to the computer and restore it

  • HT1338 i bought an eMac that has been restored to the factory setting.  It runs os 10.4.11.  the default user is eMac.  What would the default password be?

    I bought an eMac tat has been restored to the factory settings. it runs on os 10.4.11.The default user is eMac. what would the factory password be?

    There is no default user or password; these are set up with the computer following the installation process. Ask the person who sold you the computer for it.
    (75864)

  • HT1349 I lost/had my iPhone stolen. Tried using Find My iPhone and it's offline. It was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

    Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

    Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
    You chance of getting it back is very small.
    There are a few things you can try.
    Try remote lock/wipe your iPhone through Find My iPhone.
    https://www.icloud.com
    You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
    Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
    http://support.apple.com/kb/HT2526

  • Is there a risk of setting a console connection timeout and what is the recommended setting?

    Is there a risk of setting a console connection timeout and what is the recommended setting? Please suggest if there is any best prctice documentation that can be referred.

    Hi Henrik
    depend on what you need or what your security policy says for my lab gear i use 60 minutes. because i know how can access this. if you have gear outside in insecure space set it to a minimum or disable the console. everybody how can access your gear can break in. simple restart and boot w/o config. and you are in.
    it realy depends how secure is your space and how much security you need.
    and than the settings for policy have to match, what sec do you have if your console login and logout is secure. but when you restart you can simple break in by starting w/o config and than load it.
    HTH
    Patrick

Maybe you are looking for

  • Solve oracle multimedia post upgrade errors

    Hello, I performed and out of place upgrade from oracle 10.2.0.4 to 11.2.0.4. when I run the postupgrade script i have issues on oracle multimedia that i cannot solve.. it is about shared memory. I followed all the recommendations suggested on the pr

  • Wierd Wifi config issues

    While trawling the "System Information" for my Macbook Pro (OSX 10.8) I noticed two peculiar things, and wonder if they have anything to do with my intermittently poor wifi reception.  The first is that even though I'm on my own network at the moment

  • Separate email accounts for different apple products.

    I have 2 iPads and 2 iPhones in the house how do I make spectate accounts because at the moment they are all linked to one email address?

  • Suggestions on Posting and Getting Better Answers

    Hello, and Welcome to the Forums! In order for this tool to be of maximum service, you should know that this forum is run and maintained by users just like you. No one in these forums is formally employed by MSI. All the Moderators started out just l

  • Hideshow region column sort problem

    Hi, I have a HideShow region containing a PPR report. All is well except that the region hides when I click a column header to sort. Anyone got a solution to this? I've tried a few methods involving trying to store the ID of the region in a user-pref