HT204370 why is there a lag between sound and the film

can anyone help me my films in i tunes have a lag between the sound and the picture. They worked fine when i purchased them but have now developed this time delay, Very annoying when their lips move but out of time to thier spoken word.

Hey ben.brittain,
There's an article that helps troubleshoot video playback issues within iTunes for Windows 7. It specifically mentions audio that is out of sync with the image on-screen. You can check it out here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Cheers,
David

Similar Messages

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

When watching Youtube, there is a lag between sound and video. Does anyone know how to fix this. It only seems to happen on Youtube.

Youtube starts ok, but there is a sound/video lag which becomes greater as the video continues. This doesnt happen on other sites which use video.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sign out of the ID and sign back in. Note this will delete all old Messages from the iPod.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Why is the price of my Iphone 5s higher than the official price? I bought a 16G balck Iphone 5s in America Airport recently, and it costed me $850. I wondered are there any differences between mine and the ones sold on the apple online store?

Recently, my friend bought me a 16G black Iphone 5s at America airport and it costed $850.
But I really hope to know why it cost $201 more than the ones that sold on apple online store, since the consumption tax can't be that much.
Really hope to get some help.

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

I have a major lag between typing and the letters appearing on my screen? Any suggestions?

When the key board appears on the screen I start typing, but there appears to be a major pause between the typing and the letters appearing on the screen. It started after updating my system some time ago. I have an ipad1.

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

Why are there print differences between Reader and Acrobat Pro

I have a PDF file generated by InDesign (CS3). When I print the PDF from Reader (8.1.4) I get lighter text than when the same file is printed by Acrobat Pro (9.1.0). A close examination of the printed letters shows that the text printed from Reader is not solid black, while the text from Pro is solid black.
Is this typical or is there something I need to do to improve the printing from Reader?

I am a CADD Coord. (CADD Mgr)designer) I used to do a lot of design. Just recently we have noticed that anything printed from Adobe, the reader or the full version, is printing so lightly in many cases that it looks like it is missing data. whenever we create teh PDF from Autodesk products or Bluebeam Revue, it is the same. Bluebeam prints perfect. Yet the exact same file printed through Adobe is very, very light. Even printing as image it does this. And it appears at random. Some people print ok, but the exact same printer sent by someone else, using the same method, comes out too light in Adobe.
I have contacted Autodesk and they have punted it back. Anyone have any answers or clues to fix? i send out deliverables for clients all the time and I hate to find out they print and miss something of the design.

Is there a relationship between InfoPath and the "Solution Approval" and "Solution Unpublish" timer jobs?

One of our developers has a test SP 2010, service pack 2 system. Against it, he is testing form library InfoPath 2010 applications that he is developing.
There are, over the 2 months he has been working, an increasing number of times that the machine becomes so slow as to be unusable. For instance, in his attempt to publish an updated form this morning, the publish time was about 2 hours.
I see nothing obvious in the event log.
However, in the 5.7 million line 14 hive log, there are 5.6 million lines of the form:
Solution Deployment : Deleting directory C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\Template\Features\FT-01-6d499aed-f899-c88e-5f7e-8dad243ccaf1\solution.xsn.1.0.0.1018.1.0.0.735. Delete if not empty. ae8f490c-f1bf-4f25-92aa-6fc8e0de7de5
When I look in the Features subfolder, there are over 13k of folders containing a solutions.xsn and a DLL with the name of the application.
These folders date back to when the work began.
When I look at timer job history , all I see are status of Succeeded.
But I do notice that every minute a series of 6 Solution Approval and 6 Solution Unpublish timer jobs run.
Since the timer says to run every minute, I suspect that something is wrong with the jobs.
This being a test machine, there is no reason to have 13k of old copies of the form and dll. He is not going back to one of those as far as I am aware.
Is there some action that he should be taking that should be "cleaning up" this situation?
Is there something that a SP admin could do to clean things up so that things no longer take so long to run and create such large log files?
Thanks for your ideas.

Try using this document to locate the tag: http://goo.gl/GDeRb
It could have worn off, depending on how long you have had the notebook and what kind of conditions it has been through.
Also, where did you happen to purchase it from?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Mismatch between sound and video

When I watch a movie in iTunes of Apple TV (2gen) and I want to move it few seconds/ minutes and more backwards then it like "losing its mind",
the video jumps forward (a lot forward) and the sound stays the same, so ther is mismatchment between sound and video.
What can i do to solve this problem?
Thank you!

Am I the only one suffering this issue with the video transcoding?

Shift between sound and image ?

Hi there!
I have a weird issue on my computer: there is a tiny shift between the sound and the image: the image goes faster than the sound, which is very annoying, especially when the movies are long. Sometimes it works perfectly and it seems to be because the computer is busy doing something else in the background. Otherwise when I'm just running quicktime, the shift appears... But I am not sure this is because of that actually. Any idea ? Thank you a lot !

Any idea?
Afraid I don't fully understand your question. If you are asking why this occurs, the reasons most frequently are:
1) Camcorder audio recorded at 12 bits is converted/captured by harware/software that expects audio to be in a 16-bit format. In this case audio data is processed in groups of 16-bits where only 12 represent a discrete unit of coded sound.
or
2) "Muxed" source file using custom/non-standard bit rates and/or VBR audio is converted to a "frame-to-frame" sync format file. In this case, audio and video is "demuxed" to individual intermediate audio and video streams before final conversion to the target format. Once again, the intermediate audio usually expects a fixed/constant number of bits to represent a discrete unit of coded sound.
Basically, what's happening is that the audio and video streams of information are no longer of the same length when laid out side by side (i.e., "frame-to-frame) and, thus, the audio and video are "out of sync." Specifics may vary. It all depends on the actual source formats, as well as, the manner in which the final streams are merged. Most frequently, the audio track ends up shorter than the video track. If they are merged by starting both tracks at the same time ("added"), then the audio gradually diverges from the video more and more throughout the movie and by the end of a long clip can be noticeable "out of sync." If the tracks are merged by "adding and scaling" one of the tracks, then the problem is somewhat more difficult to define. In this case, the beginning and end of the movie may be nticeable "out of sync" while the middle may almost seem to be "in sync."
Now, if you are asking about solutions, then those depend on the source of the problem. Where the problem is merely in the camcorder setting, change it. If it is in the conversion/capture by hardware/software and user settings are available, then change them. If no such user settings are available, consider changing your work flow. (E.g., capture/convert using different hardware, software, or methodology such as digital-analog-digital double conversion where all else fails). Lastly, you could attemtp to "fix" the problem in "post-production." While is should be a last resort, many good editor applications do allow you to analyze the audio graphically and scale (compress/expand) tracks in order to "re-sync" them. While I have yet to try the utility myself, a dedicated application called "Movie Sync v1.0" is currently available for Mac machines. This utility allows the user to loop audio at a desired point in order to "locally" re-sync audio and video. (I can only assume a localized "scaling" is being performed.)
Does that help?

Hi. when I'm texting, if the person i'm texting sends a text before i've sent mine, i dont get an alert sound and the message only arrives after mine is sent even though i may know its there waiting. I didnt have this problem till i updated software. 4s

Hi all. Hope someone can help with this infuriating issue that I didn't have until updating. If a friend texts me while I'm texting them, I don't get an alert sound and the message stays outside waiting for me to send and finish. When I send, my friends message comes in but ive probably gone to home position and missed it. waiting for replies till all hours.

I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

Is there any Link between BNK_MONI and DMEE

Hi ,
I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI .
I am running following sequence of T Codes :
RVND --> F8REL --> F111 --> BNK_APP --> BNK_MONI ..
I want to update one of the fields in output file generated by BNK_MONI .
Is there any link between BNK_MODI and DMEE ?
Or shall I have to Debug background job created by F111 like it is done in case of F110 ?
Please suggest..
Edited by: Yogesh Gupte on Jan 27, 2012 6:59 PM

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

Is There any Relation Between PCD and SSO

Hi,
Is there any relation between PCD and SSO, why because if i am try to connect from portal to R/3 in the user mapping i got one error i.e some pcd error.
pls tell me how to rectify that.
Regards,
Jagadish Babu Kanikanti.

Hi Jagadish
The PCD is only a central persistance for storing Portal objects. There is no such relation between PCD and SSO that could create a problem. You can however check for the PCD error in this manner.
1. In the system administration role, choose System Administration -> Support. The Support Desk appears.
2. Select the area Portal Content Directory.
3. Click on PCD Configuration in the test and configuration tools. The next screen shows all the parameter values currently maintained for the PCD.
4. To reload the configuration, choose Reload.
Hope that helped.
Best Regards
Priya

Is there any integration between Payroll and AP or Cash Management?

Hi All
Is there any integration between Payroll and AP or Cash Management?
Regards
Rahman

and that document refers to checkwriter as bridge between Payroll and Cash Management.
Q: But how many legislations have a checkwriter?
A: Only a very few.
So that is why i replied 'not really' in the beginning of this thread.

'Is there a link between OLM and iProcurement'

I have been asked 'Is there a link between OLM and iProcurement'? The person posing the question is wanting to create trainers as suppliers and I know that the supplier information is shared between OLM and the A/P, A/R and G/L modules and I presume that the link to iProcurement will be via one of these modules however is there a more direct vanilla link between OLM and iprocurement?
Any help would be great
Thanks
DM

I am afraid there is no link between the iProc and OLM.
The closest that apps can offer you is that your learner/delegates can be of type external i.e. being an Organization or a Customer. Hence there exists a link for your delegate to be a customer(hz_parties).
However this might be a future integration i.e. Trainers being suppliers. I am saying so because in 11.5.10 there is a table named OTA_VENDOR_SUPPLIES that has reference to vendor_id. Currently this table is not being used by OLM.
You may look into the code of packages OTA_VSP_API, OTA_TEA_BUS & OTA_PLE_BUS and see if Oracle's future functionality will converge towards your business requirement.
Thanks,
Anil Passi
http://oracle.anilpassi.com

Why are there so many more choices on the USA iTunes Store? Surely having an iTunes account should let you access all itunes availability the world over? Also how do you request films/tv series to the UK itunes?

Why are there so many more choices on the USA iTunes Store? Surely having an iTunes account should let you access all itunes availability the world over?
Also how do you request films/tv series to the UK itunes? There's tv series I'd like but they're incomplete like The Batman & Xena Warrior Princess. And films theta aren't available for download but you can purchase in a store like HMV? Apple isn't doing itself any favours by secluding countries by their store. They'd make billions if you could just select the iTunes Store you want to search & purchase from just by signing in! If anything what they're doing is putting themselves into a corner, other companies like Samsung & HTC are already on too of them for innovation & ease of use. The people they're attracting are predominantly existing Apple users not new customers. What do you guys think?

It's not Apple's choice, they can only sell a particular item where the content provider/rights-holder has granted them a license to sell them. Content is licensed by the rights-holders to Apple on a country-by-country basis, each country therefore has to have its own store, and you have to be in a country to use its store - they want control over where their content is available.
You can try requesting that an item be added to the UK store via this page, but unless the rights-holder agrees to then Apple won't be able to sell it here : http://www.apple.com/feedback/itunes.html

HT204370 why is there a lag between sound and the film

Similar Messages

Maybe you are looking for