HT204380 Hi some one can help me? I have a iPhone 4, FaceTime and iMessage never activate? I did all what the page says! Thanks!!
Problems with FaceTime and iMessage, not activateD
Are you using a supported carrier? See this list for supported carriers: http://support.apple.com/kb/ht1937
FaceTime/iMessage use SMS messages sent to Apple's servers in the UK. If you are using a supported carrier and your account is properly provisioned for an iPhone, you should have no problem. If you are using an unsupported carrier, they may be blocking the international text message used for activation.
Similar Messages
-
HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me
Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi 51 KB
Binning example.png 12 KB -
Please some one can help me to fix the special char issue
Hello,
Please some one can help me to resolve the issue.
I was try to load data from PSA to DSO,where it was got failed.
error message is saying that "Value 'Blythewood' (hex. '0042006C00790074006800650077006F006F0064') of characteristic ZSHPTOCIT contains invalid characters".
Please advise me to resolve the issue.Hi Aryan,
Change your info-object ZSHPTOCIT to accept Lower Case Letters(it is in General tab of the Info-object definition screen. Check the Lower Case Letters Box) and then load the data. I dont know why you are using the info-object but you may want to check what "Blythewood" means to business users. If it makes sense to them then its fine or esle ask the R/3 team to correct the data.
Regards,
Nikhil -
Since installing 7 I cannot get facetime and imessage to activate. I have taken all the steps that have been recommended in supportbut still nothing. I get a text of characters that mean nothing everytime i try. Please can anyone help?
Thank you!Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Above is from:
http://support.apple.com/kb/TS3694 -
So I just updated my MacBook (2009 model) to Maverick and I tried signing into Facetime and iMessage but it just stays stuck in the log in screen. Any help?
same problem, its driving me crazy, never had this crap with any other phone
-
I am a new user...how can I permanently (not have to go to view and zoom every time I go to a new page) increase type size
In the System Preferences, you can change the display resolution.
Cheers, Tom -
How can I make my number appear on my facetime and imessage
Can someone help me with my facetime and iMessage. I can't use them at all. And how can I put my number on facetime and iMessage? I want both mynumber and email on both.
The Settings App. It has a greay icon with gears.
-
When I try to select my phone number as a way of FaceTiming and to iMessage me, it is blanked out in a light grey and will not let me select it as an option so I can only be contacted by my email but this isn't how I want to be contacted. Please help?
Hi there Scrivzy,
I would recommend taking a look at the information found in the article below.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
-Griff W. -
How can I verify my phone number to use FaceTime and iMessage instead of email address!?
My iMessage and FaceTime are both working, but it still says "Waiting for activation.." right under both the FaceTime and iMessage settings. Under the "Receive At" setting, my email address is entered in. When I press on my email address, it takes me to a page shows my Apple ID, my email address, and in gray it says "Vertifying" with my phone number also in gray. I am currently out of the country and am using wifi for my apps, iMessage, FaceTime, and checking email. Why does it still say waiting for activation even though I can use everything fine?
I want that to be my last option if I need to. I don't want to delete everything and update everything back over. Are the finished with updating the severs? Last night I was unable to sign in using my Apple ID to use FaceTime or iMessage, but now I am logged in, but I can't verify my number. My iMessages are going through with my email instead of my number
-
We had a storm here and I unplugged all of my computers and modem. After the storm passed I plugged everything back in. The main computer connected to the internet without any problems. When I tried to use my computer I could not get on the internet. I turned the modem off about 100 times, restarted my computer numerous times and still unable. When I typed in 192.168.1.1 only the one computer was showing. My computer and my wireless laptop were no longer listed. I tried numerous things, installing a network etc... I used the online tech support, which is totally useless and verizon should just get rid of it. I mean come on I am talking to you on the internet and you are going to ask me if the modem has power to it. Anyhow I digress. Can someone please give me some suggestions or tips to get my other computers back online?
magnum1973 wrote:
It is an actiontec gt704wg. I don't even care about the wireless right now I just want to be able to get the 2nd one that is hooked up via ethernet cable.
Start with the simplest information. When the Ethernet Cable is connected, do indicator lights on the Actiontec and on the computer's network interface port light? Lights indicate signalling exists between the two devices - most basic information.
If OK, then open a Command Prompt windows (under Start>Programs>Accessories, or click on RUN and enter CMD, or view Windows Help). In that command Window, enter IPCONFIG or IPCONFIG /ALL to learn what you have.
Also in Cmd Prompt, enter PING 192.168.1.1 to see what it really connects to.
In each case, you are not yet fixing anything. These exercises provide facts so that your replies can be useful. -
Some one can help me with Properties()
hi, i try and i try to reasign one group of final static var, and i cant, so i see can i use the Properties() class to reasign one final static var.
import java.util.Properties;
Public class Config extends Object{
static final int EMITIDO;
static final int PAGADO;
static final int ENVIADO;
static final int SOLUCIONADO
public void Config(){
Properties defaultProps = new Properties();
try{
defaultProps.setProperty("my_new_emitido","2");
defaultProps.setProperty("my_new_pagado","3");
defaultProps.setProperty("my_new_enviado","4");
defaultProps.setProperty("my_new_solucionado","5");
EMITIDO = (new Integer(defaultProps.setProperty("my_new_emitido"))).intValue();
PAGADO = (new Integer(defaultProps.setProperty("my_new_pagado"))).intValue();
ENVIADO = (new Integer(defaultProps.setProperty("my_new_enviado"))).intValue();
SOLUCIONADO = (new Integer(defaultProps.setProperty("my_new_solucionado"))).intValue();
the compiler send me a error : cannot assign a value to final variable ABONO
some can help me please!!!tks, yes i now but that was the only way to use them
in other class with the case statement
meabe you now other way tks.Use ifs instead of the switch. -
I HATE Menubar ... some one can help???
Hello, i'm alone inside this project (
http://br24.dialhost.com.br/~areaproj)
and want to use flex... but having troubles with idiot menu.... In
my case user que can change viewstacks when he click in Item of
menu and in subitem to. For this a must make menubar show submenus
when user rollover mouse... Some one know how to do this?
Thanks.create a menubar, link it to a xml list (for the drop downs)
then on event "rollOver" have it expand the menu.
<mx:MenuBar id="myMenuBar" useHandCursor="true"
buttonMode="true" toolTip="The Main Menu" labelField="@label"
width="322" cornerRadius="10" alpha="1" left="171" top="48"
styleName="TopMenu" themeColor="#333333" selectionColor="0x7FCEFF"
rollOverColor="0xFFFFFF" borderColor="#642200"
itemClick="mainMenu(event)">
<mx:XMLList>
<menuitem label="Products" id="products" top="48" >
<menuitem label="French Bread" data="1"/>
<menuitem label="Croissants" data="2"/>
<menuitem label="Muffins" data="3"/>
<menuitem label="Rustic Bread" data="4"/>
<menuitem label="Desserts" data="5"/>
<menuitem label="Pretzels" data="6"/>
</menuitem>
<menuitem label="Customers" >
<menuitem label="Login" data="7"/>
<menuitem label="Steps to Become Potential Customer"
data="8"/>
</menuitem>
<menuitem label="Company Resources" >
<menuitem label="History" font-color="#FFFFFF"
data="9"/>
<menuitem label="Employment" data="10"/>
<menuitem label="Employees" data="11"/>
<menuitem label="Newsletter" data="12"/>
<menuitem label="About Us" data="13"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar> -
Boot Camp Issues like crazy. Maybe some one can help?
Hello,
I own a MBP late 2010. I also own a copy of windows 7 ultimate. I had it installed and it worked fine for over a year. I had to reformate my system last week. So I decided to start fresh and just completely re-format my drive. Well, I made the partition useing boot camp and that worked just fine. Boot camp restarted and gave me the error saying that it was missing dvd drivers. Well, this is odd to me because ive used this same exact disk before for the same exact thing on the same exact computer. THe disk isn't messed up or scratched. I read that it means i downloaded a curroupt copy. Which can't be the case because it is a legit copy from microsoft.
So I then preceded to delete the partition and start over. Now boot camp will not partition my drives. Why? Why must this software be so stupid? What am I missing here. Why/ What is causeing this?It wasn't an ISO, it was the actual DVD of windows 7 ultimate. I didn't add any drives to my system. It is a stock unit, no changes made.
So, I guess my question is did something change about a bootcamp update that would possibly make it not work again? I did a fresh install of OSX Snow Leapoard. It is currently updated to 10.6.8. I also waited till the macbook pro was completely updated before i attempted my Boot Camp Installation.
So my system specs are
MBP late 2010 (stock everything)
OSX 10.6.8
boot camp 3.0.4
and a pysical copy of Win7 Ultimate(64bit).
I'd like to re-add that this all worked properly in the past. I did a system reformat and this is what happened when i tried to put windows back afterwards. -
Some one can help me ? Idendification of MultiCube
Hello Experts, (BI7.0)
I have a MultiProvider in wich 4 InfoCubes inside. In ervery InfoCube is ProfitCENTER.
Like this:
1. CUBE :0WBS_ELEMT__0PROFIT_CTR
2. CUBE: 0COSTCENTER__0PROFIT_CTR
3.CUBE: ZWIO_COOR__0PROFIT_CTR
4.CUBE: ZWIO_COOR__0PROFIT_CTR
When I create my MultiCube, what is important. I want to Show in the Query:
- Profit Center Hierarchie ...
- Costcenter Hierarchie..
I have Problems with the idendifications :(((
Someone help me about this ?
THANKS
Edited by: Christina Meier on Jul 8, 2008 10:01 AM
Edited by: Christina Meier on Jul 8, 2008 10:23 AMHi,
You must press in the identify characteristics and select key figure icons for identify each caracteristics and key figures, that will be used in the query.
AleX
Maybe you are looking for
-
Deployment issue on windows server 2008(64 bit)
Hi all, I am using crystal reports 2008 trial version for my web application. Its working fine in development environment but when I deploy application in windows server 2008 64 bit edition it shows following error:"An error has occurred while attemp
-
Reading XML file from application server and put into internal table-4.6C
Dear All, Is there any way of reading XML file from application server to SAP? I am using 4.6C. Function module SCMS_STRING_TO_XSTRING function module is not available. Please suggest. Thanks and regards, Atanu
-
Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How
-
Create a work order using the BAPI for IW31
Hi, I want to create a work order using the BAPI for IW31 tr. can any one help me with the program description. Full points will be awarded for the useful answers. Thanks and regards, Sunil
-
Hi frnds, These many days i was using toad in my office and am very much comfortable with it.But now am forced to use SQLDeveloper. When am using Toad, whenever i want to change the data i would just press F4 on table name and a window appears and th