HT204380 I can't use Facetime. Checked all settings are correct.

I cant use Facetime. I see the missed calls. I can't place a call either. Confirmed settings are correct following the troubleshooting guide. My WiFi works fine (can send text /o issues). My contacts are all iPhone users.

Thanks for your reply.  Since posting this I somehow managed to create an IMAP account on my phone and everything is coming through npow!!
I don't know what i did but it's working.
FYI I'm with Sky,com and a password is required.  No error messages were being received.
Thanks

Similar Messages

  • Can no longer send or get mail. All settings are correct. Worked fine before.

    I can use a secondary account but not my primary yahoo.verizon account. Verified all settings are correct but the password was erased. After re-entering password a message says I have to verify my password by entering it at www.yahoo.com. However, I DO NOT have a Yahoo email account. It is a Verizon email account partnered with Yahoo.

    OS X Mail: Troubleshooting sending and receiving email messages

  • I have Lion on my IMac and it is hooked up to I Cloud, however, even though all settings are correct I am not getting auto sync of calendars  to my I Mac from my IPHone 4S or my iPad 1. Neither am I getting Photfrom my IPhone to my I Mac?

    I have Lion on my IMac and it is hooked up to I Cloud, however, even though all settings are correct I am not getting auto sync of calendars  to my I Mac from my IPHone 4S or my iPad 1. Neither am I getting Photfrom my IPhone to my I Mac?
    Can someone set me straight?

    Check system preferences to make sure you have iCal and your photostream checkmarked to TRUE.
    If you still have problems, give us more details.
    Also, make sure the calendar in iCal you're using/looking at is not "On My Mac", but actually an iCloud one.

  • My iphone is silent since downloading IOS7. All settings are correct and the side button is on.

    My iPhone is silent (ring tones and text alerts) since downloading IOS7. All settings are correct and the side button is on. HELP! Missing inportant calls.

    Try hard reset.
    Hold down the sleep and home button until the screen goes black. Turn the phone back on.
    If that doesn't work, back up the iphone using iTunes.
    Re-install the iOS by putting the iPhone into DFU (recovery mode.)
    To do this,
    Make sure the phone is pluged in to you computer with iTunes open.
    Hold the Sleep and home button until the screen goes black, immediately release the sleep button but continue to hold the home button.
    After a few seconds your iTunes should recognize your phone in DFU mode.
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    At this point you should click on "Restore iPhone"
    After your phone is done restoring, don't start as new iPhone. Restore from back up.
    If that doesn't work, you're SOL.
    Take it to Apple. Tell them they are stupid.

  • HOW DO I GET MY PHONE TO VIBRATE? ALL SETTINGS ARE CORRECT

    my phone is not vibrating. how do i fix this? all settings are correct

    Hey there kgoncalves23,
    It sounds like the the vibration function of the iPhone is not working correctly.
    I have some recommendations to help you out here. First, connect the iPhone to the wall charger that came with it, and reset the iPhone with this article and then test the vibration again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    If the issue persists, I would next backup your phone to iTunes and restore it. Set it up as a new device, and test the vibration again. When it works, restore your backup and verify it is still working. This article will help with that:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Re: I have to reboot the Satellite U400 to ensure that all settings are correctly

    I just first started my new U400.
    However, after registering Windows and Toshiba Quarantee, the system (toshiba message) keeps on showing a warning/info after every time I reboot that I should reboot again to check if all settings are corectly installed.
    Please help!

    Hmm its a little bit strange for me.
    But I assume there is a tool starting always when the notebook boots up.
    Go to RUN and access use the command msconfig.
    There you could check what applications start at the beginning.
    Then unmark (disable) the process which could cause this message and reboot the notebook.

  • I recently downloaded lots of CD's to my itunes library. I have itunes match. None of the downloads are appearing on my ipad or iphone. All settings are correct. Anything I purchase on itunes shows up in the cloud on all the devices.

    I downloaded CD's to my itunes library. I have itunes match. All my itunes purchased music is on my ipad and iphone cloud. For some reason, while the cloud appears in my library, the CD's that I downloaded (popular ones that itunes recognize) are not showing up on my ipad2 and my iphone4s. When I purchase songs from itunes directly they show up on all i devices (with the cloud icon). In my itunes library all the new downloads from CD's have the icloud icon. However, none of these downloads are showing up on my ipad and iphone as stated above. All my settings are correct. I am sure I am missing something, but not sure what....if anyone can help, I'd really appreciate it. thanks.

    This might help: http://www.macworld.com/article/1146958/move_itunes_windows_mac.html.

  • When I take my IPAD to another country and try send an e-mail to friends around the world or the country I am I her message - server can not relay message but I can receive without any problem. What is the fix? All settings are correct I have no problems

    When I move from country to country. I can not send / reply to e-mails. All account settings are the same as when I was at home where there is no problem. Receiving is also not a problem when out side my resident country, what is the answer?

    The easiest fix would be to just use safari and a webmail interface.
    For example, I have yahoo in my mail app. But on some internet connections it just won't work, so I use safari to get to yahoo.com and access my mail that way.
    Your mail provider should have a web interface and you could use that.

  • HT1277 BT have confirmed all settings are correct.  Contact Apple, see if they can sort it......

    I cannot receive webmail from BT office 365.  iMail is unable to receive emails.  All my settings/preferences are correct.  They were confirmed by BT!  Bt operative told me to seek help from Apple!  What do I do?  BT set up iMail using screenshare, before you ask.

    This is a user forum, and not a formal channel into Apple support.  If you're looking to discuss this with Apple Support (which I'd infer was what BT had intended), then you'll want to contact Apple support directly, either by phone, email, or the Genius Bar at an Apple store.
    You have written that you cannot receive "webmail from BT office 365", but there are few details on how that mail is being routed and received.  I'm going to make some guesses here.
    In general, you cannot receive web mail directly - assuming that this BT office 365 is a typical web mail system - as there needs to be a mail server involved somewhere.  I can't determine from what you've posted and what I see on the network if the mail server you're referencing might be the same server as is used by "BT office 365", or if it could be a different server.  If it's a different server, then there are other places that mail can be dropped.
    Based on what I see on the net, this BT office 365 web mail package appears to be the Microosoft Office 365 package.  If that's the case, then Microsoft has troubleshooting information available, and also has information on determining the proper mail server settings for Apple Mail.
    If the server behind the Microsoft Office 365 mail system at BT is the same mail server that you're using here (amd as I might guess), then the issues are within BT's network, or with the network connectivity from your network into the BT servers.  Its also quite possible that there are firewall or other blocks operating within your local network, or in the path to the BT servers.
    Connectivity can be verified -- that's something that a typical front-line support call would try and resolve - but I don't know if that testing has happened here.  Basically, there would be an attempt to connect into the ports made directly, typically using either telnet to the target port, or openssl s_client connect to the target port for SSL-based connections.  This to determine if the port is blocked or not.
    Given that using telnet or openssl s_client are tools that you probably don't want to start out with, start with the above Microsoft documentation for the proper settings, and try the Apple Mail Connection Doctor tool (Mail.app > Window > Connection Doctor), and see what that reports.
    If the error(s) or problem(s) you're encountering here are not a baseline mail configuration error (and if there's more than one mail server involved), then it's quite possible for mail from one mail server to be rejected by another.
    And if you continue to have issues, contacting Apple Support directly might be helpful; you can share credentials and server-related information with them, and that can greatly speed up the troubleshooting process involved here.

  • Firefox is not saving my browsing history anywhere including the addressbar. All settings are correct in options.

    I had to re-install Firefox and since then all my history in the address bar is not being saved. I have followed the instructions and checked all the settings to save history but still no history being saved. Is there a way to go back to original default settings?

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Incoming email will not format in html even though all settings are correct

    I have Windows Vista operating system. Our IT guy recently updated my Thunderbird version to 31.5.0.5531 from a very old version. I have tried all suggestions from forums about settings for HTML viewing. At this point, I don't even get the option of reading an email in HTML. I forward a lot of messages to my coworkers, and I can't do that any more. Any help would be greatly appreciated. I would also gladly go back to an earlier version.
    Thanks Cindy

    You ask about HTML, but most of your settings are about remote content. Is it images that are causing grief or HTML?

  • After downloading iOS5 on iPhone 4, the volume buttons and switch on phone's side won't work? All "Settings" are correct, but phone is completely silenced at all times. Solution?

    There is no longer a Lock noise, Key clicks, Phone Ringer, camera shutter noise, etc.

    has anyone solve this problem? i upgraded my iphone 4 to 5.1.1 and now i can see only ""We're sorry, we are unable to continue with your activation at this time.  Please try again later, or contact customer care."
    i tried mani sim card, laptops, wifi. but for 7 days the problem is still exist....
    Please help me!!!

  • Got both wife's ipad and iPhone working with iMessage. Got my iPhone set up but can't get my ipad to use iMessage. All settings are exactly the same.

    Please help I'm at a loss. I restarted my ipad. Didn't work. I logged out and then back into iMessage. Didn't work.

    If your device is frozen and unresponsive, reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

  • Mac OS X Mavericks 10.9.4 and App Store not notifying about or automatically checking for updates event though all settings are correct

    Seems as though the automatic updates is not working. I have checked the boxes and unchecked them as well. Still no auto updating for the OS. They do work for my apps though. Attached is a command shell screen shot.
        AnonymousUUID = "A08EFDE1-D713-4BEA-93CD-01978C07BCD6";
        AutomaticCheckEnabled = 1;
        AutomaticDownload = 1;
        ConfigDataInstall = 1;
        CriticalUpdateInstall = 1;
        DidRegisterLocalUpdates = 1;
        IgnoringUnseenRamped = 0;
        LastAttemptSystemVersion = "10.9.4 (13E28)";
        LastBackgroundCCDSuccessfulDate = "2014-07-06 01:56:09 +0000";
        LastBackgroundSuccessfulDate = "2014-07-06 01:56:09 +0000";
        LastFullSuccessfulDate = "2014-07-06 01:55:04 +0000";
        LastRecommendedUpdatesAvailable = 0;
        LastResultCode = 100;
        LastSessionSuccessful = 1;
        LastSuccessfulDate = "2014-07-06 01:55:04 +0000";
        LastUpdatesAvailable = 0;
        PrimaryLanguages =     (
            en
        RecommendedUpdates =     (
        SkipLocalCDN = 0;
        lastDownloadError =     {
            code = "-1001";
            domain = NSURLErrorDomain;
            userInfo =         {
                NSErrorFailingURLStringKey = "http://swcdn.apple.com/content/downloads/20/37/zzz061-8477/kGNCGM7LcCG5DGMqpDxQc P5pGN4xRxtBDH/SecUpd2010-005Snow.pkg";
                NSLocalizedDescription = "The request timed out.";
    Any assistance would be greatly appreciated.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have installed latest update and checked all preferences are correct in my MAC but still cannot download PDFs from some websites

    When I am on a website and need to download a PDF it tells me I need to get latest update of Adobe Reader. So I get latest update (God knows how many times now) but still cannot open the PDFs - any suggestions?

    This is probably because the websites you are visiting have bad Javascripts to check the version of Acrobat but can you screenshot the error that you receive and the post it?

Maybe you are looking for

  • Mavericks permission issues with Windows Server deduplicated shares.

    We have a number of 10.9-10.9.3 - Mavericks - machines installed throughout our facility. Much of the user content is pulled from shares stored on our Windows Server 2012 fileservers with deduplication enabled. I have found that files newly written o

  • Item outside the memory bounds

    Hello I built a COBOL service that calls COBOL programs contained into a DLL file. From time to time an error is recorded into the 'stderr' file: Execution error : file 'MQN_SECMQNTESTORCL' error code: 114, pc=0, call=1, seg=0 114 Attempt to access i

  • ABAP Function Module table into crystal

    Hello, I created a ABAP Function Module with one export parameter(a structure), and another table paramemter(with table type of identical to a table in sap). I wrote a simple select statement and dumped the data into the internal table which I am pas

  • My BB Curve 9380 screen stuck in Landscape

    My screen has somehow become stuck in landscape display. I've tried pulliing the battery but this does not help. How do i get it back to automatically change between portrait and landscape modes as i rotate my phone?

  • HT1766 if i backup and restore my iphone 4

    will I be able to same my whatsapp, text and imessages?