HT204382 i need connect my office camera to my iMac

hello

um... having to update most of the system software is still incredibly time consuming, and I already did it once. Problem persists. Mavericks is fail. Period. The ONLY thing that made paying the premium for a mac WAS the OS. Now? Taking this heap back tomorrow and getting a PC. If I have to trouble shoot this much it would be better if I save money and can play games. Apparently with the death of Jobs so to does the OS die.

Similar Messages

Connecting Wi-Fi Camera to Mac via Airport?

I just purchased a Nikon Coolpix P1, which is Wi-Fi certified. The manuals provided with the camera leave something to be desired, and I am having trouble establishing the Wi-Fi connection between the camera and my iMac. Should I in fact try to make that connection via my Airport Express system? If so, where can I find the settings I need to input into the camera? The camera and computer seemingly should be able to connect directly, but here too I'm not sure where to find the computer settings that the camera needs to have.
iMac Mac OS X (10.3.9)

Welcome to the discussions!
I assume you've read these instructions.
Is your iMac connecting wirelessly to the Express for Internet already? If so then yes you should have the camera join that network. The settings you need for the camera can be found in Airport Admin Utility. SSID is the same as Airport Network Name. The online instructions at Nikon's technical support site look pretty good if the link above doesn't work.

Connecting without DV camera software

iMac gurus, any advice for a newbie. Can I connect my DV camera to the iMac G5 without using camera software? Should I?

Jauhsekali,
Yes as previously posted you should be able to use your firewire DV camera in iMovie with no problem. If you want to use it with iChat, first take any tapes out, connect the camera and start iChat. You should then be able to open a preview window using your camera.
Enjoy.

I need help reinstalling office for my iMac

I need to reinstall Office 2011 for my iMac. I downloaded it off the web and do not have the email that has the product key. I have found out how to uninstall it, but need to know how to reinstall it.
Thank you

Since Office is not an Apple product, contact MS support or post your question on the MS Mac forums, as this forum is for troubleshooting apple software update for Windows, and not related to MS Office in any way. The MS Mac forums are where the Mac Office gurus hang out.
http://answers.microsoft.com/en-us/mac

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

-->Click HERE<-- Does item "B" (Turn video on/off) in the last topic on the page help?
You control the camera for Skype from within Skype, so Skype must be running to running to make video work.
Message was edited by: EZ Jim
Mac OSX 10.7.4

Presenter 8 crashes after connecting external Firewire cam

Good day,
We often organize workshops and conferences which I sometimes record with an external camera for later reference by our own staff or to make them available to clients who couldn't attend the presentations.
For a long time I was looking for a tool to synchronise PowerPoint slides with spoken recorded comment (audio/video), since I don't believe in just making slides available to people who couldn't attend the presentation, without the spoken comments of the speaker.
I also believe in slides with as less text as possible, but more with images, schemes and animations to support the speaker's message. But in such a case, the spoken comment is an essential part of the presentation to get the message, since the slides as-such alone don't tell enough.
I installed the trial version of Adobe Presenter 8 to test its suitability for our company marketing and presentation needs.
Adobe Presenter 8 seems to work perfect to synchronise Powerpoint slides and screen actions, together with video recorded by an external webcam, connected via USB to my notebook or via the internal webcam in my notebook.
However, I also want to record presentations, presented in our auditorium and meeting rooms and I want to synchronise in realtime (= during the actual presentation) the Powerpoint slides together with the video/audio from the speaker. The realtime option avoids the work of recording the speaker on tape or in an MPG or FLV during the actual presentation, uploading the A/V file to my PC and doing the PowerPoint/audio/video synchronisation work afterwards by going through the whole presentation again.
To record the video I therefore use an external semi-pro videocamera (JVC DV-500), since this gives me better possibilities to frame the right image, zoom in/out, better lens, etc ... in comparison with an ordinary webcam. The JVC DV-500 can be connected to a computer via a Firewire I/F.
This always worked perfect when we recorded and streamed video/audio using Adobe Flash Media Live Encoder 3.2. Adobe Flash Encoder recognizes the via FireWire connected external cam without a problem.
But, when using Adobe Presenter 8 within PowerPoint 2010 to start recording a presentation, and when I switch on the power switch on the external JVC-cam, Adobe Presenter 8 crashes, showing an error "Application encountered an internal error ... report to product support forums, etc ..." and "Adobe-Pr-VC.exe doesn't work anymore", and creating some error log and dump-files on my notebook.
After switching off the external cam and keeping it switched off, and manually deleting in Task Manager still running instances of Presenter-software (Adobe_Pr_VC.exe), and restarting PowerPoint, everything works well again with the USB or internal webcam.
Already deleted Presenter from my notebook, cleaned up registry with CCleaner, reinstalled Presenter, but error keeps on coming back.
Someone any ideas what causes this error?
Software conflict, driver conflict, Adobe Presenter incompatible with external A/V devices, no support of FireWire I/F, ... ?
Configuration:
Fujitsu notebook LifeBook T5010
Windows 7 Pro SP1 32-bit (Dutch version)
Microsoft Office 2010 Pro Plus (Dutch version)
Creative webcam connected via USB
External JVC DV-500 videocamera connected via build-in Firewire I/F
Firewire driver was installed by Windows automatically when connecting the cam (msdv.sys 6.1.7600.16385)
The only other real-time encoding software installed is Adobe Flash Media Live encoder 3.2.
Some other usual Adobe stuff (flash player, shockwave player, AIR, reader X, )
The possibility of connecting an external cam to record the speaker and synchronise the PowerPoint and/or screen actions in realtime, would greatly enhance our work.
Thanks,
Patrick ROTEN
Marketing dept.
CIPAL DV (Belgium)

Hi,
started Presenter's Video Creator in troubleshoot mode with external Firewire connected cam switched off.
1. Video Creator started in troubleshoot mode (got the 'troubleshoot' message)
2. default active cam was the USB webcam (HD screen, SD cam)
3. started recording
4. everything worked normal
5. stopped recording
Result looked fine. Got the normal troubleshoot message, asking to send log files. Did not do this, since there was no error at this time.
Then repeated the process with exteral FireWire cam.
1. Video Creator started in troubleshoot mode
2. default active cam was the USB webcam (HD screen, SD cam)
3. powered on external JVC camera connected to the notebook via FireWire
4. Video Creator crashed after windows detected (beep sound) an active appliance on the FireWire port.
Could not even stop recording with Video Creator in a normal way to go to the "send error log to Adobe" procedure.
Instead got a box with the message: "Applications encountered an internal error. If the problem persists, please report on product support forums or contact the support team."
Had to shut down Adobe_Pr_VC.exe manually in Task Manager.
Tried the same procedure with another FireWire appliance, a DV video recorder with a tape of a previously recorded conference session.
Same error, as soon as I powered on the videorecorder, and Windows detected (beep sound) an active appliance on the FireWire port, Video Creator crashed with the same error message as above.
I can't go through the whole workflow to send the error logs to Adobe, since Video Creator crashes from the moment the power of a FireWire appliance is switched on.
No possibility to stop recording in a normal way (SHIFT-END or clicking the icon in system tray).
Had to manually shut down Adobe_Pr_VC.exe in Task Manager again.
Tried again with Adobe Flash Media Live Encorder 3.2 to see how this application reacts, to be sure there is nothing wrong with my notebook or the Windows O/S.
1. started Flash Media Encoder with external FireWire cam switched off
2. saw 2 active devices : build in Sirius webcam and external USB Creative webcam
3. saw image of my webcam in the encoder monitor windows
4. switched on power on external JVC camera, connected via FireWire
5. Flash Media Encoder immediatelly recognized "Microsoft DV Camera and VCR". Selected this and image of external cam was shown in the encoder monitor windows.
6. Could stream FireWire cam image to an external streaming service without a problem.
Conclusion: a FireWire connected cam does work with other Adobe software. Must be something wrong in the Video Creator software.
Sorry I can't send you the log files, since app in both normal and troubleshoot mode crashes prematurely.
Hope my explanation helps you a bit to find a solution.
Regards,
Patrick

How to connect a DV camera through the IEEE 1394 port on my A50?

Hi
I have been trying to connect a video camera to my notebook SA50-109 throught the IEEE 1394 port.. but the notebook didn't recognize the camera at all..
although the camera shows 'DV-in' when i plug the cable witch is (4-pin to 4-pin) DV cable..
is there any thing I need to do before to make it work?
any ideas.. please?

Hi there. Your PC should recognize automatically the DV camera. It's OK to have the firewire (1394) connection shown under "network connections". Next to mine it says "connected" although the harddisk connected to it is switched off. Maybe there is something wrong with the cable? Or, another suggestion, try to restart the laptop while the camera is connected ... Not many further suggestions I'm afraid ... Good luck!

How to connect my dv camera to my mac and make movies?

i just got my new macbook and dont no how to connect my dv camera to it...i got a software disc for my dv cam but it doesnt run automatically and i dont no how to install it....it is usb connection...do i need fire wire?...help me plz help...getting frustrated ...is the any sites that help with macs ..cuz im use to pc...dont no anything bout macs...thanks so much!!!

Hello,
It would be helpful to know what camera you are trying to connect and what exactly you are trying to do with it.
In regards to firewire vs usb i only really have experience with firewire so i can not help you there unfortunatetly.
If you are just trying to get the video footage off the camera you could try and open up iMovie from within you applications folder. Attached the camera, my iMac is currently in for repairs so i can quite tell you the whole thing but look for options of attached cameras.
The reason why the cd doesnt autorun is that it is probably window software, does the disk specifically state Mac OS X?. If you double click on the cd it should open up in a window. Have a look around for any Mac folders or any obvious applications that you can run.

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

Cable specification to connect the Document Camera to the CODEC CTS 3010

Hi to all,
I would like to know the cable specification to connect the Document Camera to the CODEC in a CTS 3010 and which way round it needs to go. As I understand it we need a DVI (Camera end) to HDMI (CODEC end) cable plus one CAT5/CAT6 cable. Can you please clarify?
Best regards,
Alberto

Yes. There are a ton of write-ups on how to do the connections. I connect my m-audio Keystation 61 es through the CCK to my iPad and use GarageBand to control it. Some keyboards require a powered USB hub to make things work. I use a belkin 4 port hub in my own setup. Here is a link to tested / verified keyboards that work via the CCK: http://iosmidi.com/devices/
Hth

"Connect to Office" in Sharepoint 2013

Hi Everyone. I need expert help. I have problems with this functionality on my local PC. I have full admin rights on my pc.
Situation:
1 Using "Connect to Office" I want to create shortcuts to some document libraries in Microsoft Tools(Word, Excel).
2 After that I have got this link on MyQuickLinks.aspx page under my personal site.
3 Next step. I am going to Microsoft Tool(Word, Excel) try to open\save document. As I have read from some documents this is necessary for sync shortcuts
4 Then i am going to "SharePoint Sites" folder under my profile on local PC. C:\USERS\"___". Open this folder, but there are no any shortcuts there.
5 I have checked registry entries (got from this link http://www.jstevensblog.com/post/Connect-to-Office-SharePoint-Sites-Not-Working-e28093-SharePoint-2010.aspx
The registry entries are valid.
6 Also, I have wait necessary time span.
Does anyone can describe how it works and what I need to check?.
Thanks in advance?

Hi Anton,
If the link has bee listed on MyQuickLinks.aspx page, it should be synced to "SharePoint Sites" folder under your account(e.g. mine is administrator in below image) folder, but it will need some time span (e.g. 24 hours or even longer).
You can also change the LinkPublishingFrequency registry value to a small value on client machine for a test per the following article(which is for Office2010, but you can try for Office 2013), see if it could sync the shortcut quickly.
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/04/23/sharepoint-2010-sites-are-not-present-when-going-into-save-as-or-open-dialog-boxes-in-office-2010.aspx
Thanks
Daniel Yang
TechNet Community Support

Cannot connect to Office 365 using Powershell on Windows 7 SP1

Hi,
I was trying to connect to Office 365 using windows azure active directory module for Windows Powershell.
$Cred = Get-Credential
Connect-MsolService -Credential $cred
It failed on my windows 7 machine with the error
Connect-MsolService : Unable to authenticate your credentials. Make sure that your user name is
in the format: <username>@<domain>. If this issue persists, contact support.
This issue happened in Windows 7 SP1 OS.
But, when I tried the same thing on a Windows 2008 R2 VM, it connected successfully.
This means that the account I was trying to login does have the permissions.
Both the machines ( windows 7 and windows server 2008 R2) have the following pre-requisites installed:
Install Microsoft Online Services Sign-in Assistant: http://www.microsoft.com/en-us/download/details.aspx?id=39267
Windows Azure Active Directory Module for Windows PowerShell (64-bit version)
I checked for other settings needed for this to work at :
(Though these settings are for Windows 8, I have all these settings in Windows 7 as well)
http://community.spiceworks.com/how_to/show/45453-how-to-prepare-a-windows-8-64-bit-pc-to-manage-windows-azure-ad-office-365-using-windows-powershell
Can someone please tell what is going wrong on my Windows 7 SP1 environment.
Thanks,
Gagan
Gagan

Hi,
Have you install installed .NET Framework 4.5 and Windows Management Framework 3.0 on Windows 7 Service Pack 1 (SP1)?
Please go through the below article to know more about what is the requirements to Connect to Exchange Online Using Remote PowerShell:
http://technet.microsoft.com/en-us/library/jj984289(v=exchg.150).aspx
In addition that, hope the below link be helpful:
Connect-MsolService : Unable to authenticate your credentials. (Wrong WebServiceUrl value in Registry)
http://jesperstahle.azurewebsites.net/?p=42
Regards,
Yan Li
Regards, Yan Li

Novice trying to connect between office and home MACs

Advice for system novice
trying to connect between office and home MACs
Office MAC OSX 10.2.8 (also runs classic mode)
G4 Computer in the office (only mac in office all others are PC)
I need to connect home computer
IMAC OSX 10.4 Tiger. Connecting via cable modem and have router
I do not have good networking skills, i this something that is doable myself or should I call in a pro?

It's doable.
But at home you need to find the "outside" IP that the Internet sees, not the one you see on that machine.
what's my ip...
http://www.whatsmyip.org/
Then you'll need to "Forward Ports" on the home router so incoming stuff knows where to go.
Then you'll need to enable the Services you wish to use on both machines.

Connect to Office doesn't work after multiple tries

Hello Everyone,
I and my users have a problem regarding the Connect to Office feature of Sharepoint.
When I click on the button, the list is correctly added to my Libraries list in my MySite.
The problem I have is that i don't see the shortcut in my "Sharepoint Sites" folder on my Laptop.
I already followed some topics regarding this issue like :
http://community.office365.com/en-us/forums/154/t/9650.aspx
http://www.jstevensblog.com/post/Connect-to-Office-SharePoint-Sites-Not-Working-e28093-SharePoint-2010.aspx (by clearing the registry)
And i still don't have any results.
After the clearing of the Registry, i correctly had the popup asking me to set up my MySite as a trusted site but i don't see even my MySite in my Sharepoint Sites folder.
It can't be a permission issue as i'm administrator of the farm.
If someone has any clue, he is more than welcome.
Thanks a lot,
Clément

Hi Clement,
Did this happen to all users (everyone)?
Did this happen before, what have you done the change to SharePoint recently?
Have you tried adding the SharePoint url to Local intranet zone in IE?
Have you tried repairing the Office 2010 on the client machine?
May also need to check if some related ULS messages have been logged.
http://office.microsoft.com/en-us/sharepoint-foundation-help/connect-to-office-HA102080653.aspx
Thanks
Daniel Yang
TechNet Community Support

HT204382 i need connect my office camera to my iMac

Similar Messages

Maybe you are looking for