HT204384 I have a SanDisk Memory Stick PRO Duo and my MacBook Pro will not read it.
I have a San Disk Memory Stick PRO Duo 4GB and my MacBook Pro will not read it. I have also connected the card into a card reader and connected it to the USB port and nothing happens. This is really frustrating. Why wont my computer read my card?
Are both , the printer and the mac in the same network?
You can find the right software and instructions here:
http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/model_top/colormfc/m fcj870dw_us_eu_as.html?reg=eu&c=eu_ot&lang=en&prod=mfcj870dw_us_eu_as
Similar Messages
-
whats a faster internet connection joining one or create one.i have one ps3 one imac 2 ipads and one macbook pro?
For the AirPort Extreme Base Station to provide Internet access to network clients, it would need to be configured for: 1) Connection Sharing = Share a public IP address, and 2) Wireless Mode = Create a wireless network.
Although the option: Wireless Mode = Join a wireless network, exists for the Extreme, it really serves no purpose and should not be used. -
MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?
Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan -
My new apps have changed to try within creative cloud; and my installed apps will not authenticate. I recently canceled one subscription and replaced it with another. Can you please look at it and correct?
Solution for Windows 8.1: Locate the C:\Users\USER\AppData\Local\Adobe\OOBE folder. Log out of Creative Cloud and from Task Manager end task for Creative Cloud. From the OOBE folder delete ALL files. Do not delete folders (com.adobe.accc.apps & com.adobe.accc.home). When complete, restart Creative Cloud and log in with ID and Password.
-
How can I have Facetime callers distinguish between my Ipad and my MacBook Pro?
I'm wondering how does one set things up so that a Facetime caller can distinguish between calling me on my iPad versus calling me on my MacBook Pro? I have family calling me and it is popping up on the MacBook when, ideally, the call would come through to my Ipad when I'm traveling?
Hello Mac_ThePI,
In FaceTime's preferences, you can choose what Apple IDs and/or phone numbers you can be reached at. You might choose to make the phone number or certain Apple IDs the only checked option(s) on your iPad, and others on your Mac.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
Allen -
System upgrade on MacBook Pro stopped and my MacBook Pro will not restart.
MacBook Pro will not restart.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are unable to get it working using the above, then you will need to try this:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
And, if this doesn't help, then the HDD is failing or has failed. -
I am trying to reset my apple id under icloud account information on the original pc that I set the account up. I have changed email addresses now and would like to change to new address. I have gone through the steps on changing apple id and password and have my phone hooked up to pc but it will not change over to the new address and password thus I can not order any apps or use icloud. Help!
Go to Settings, and then turn iMessage and FaceTime on if they are off. If they are on, then turn them both off, restart the phone, then turn them back on.
Go back to Settings > iCloud. Whether the current or old email address is displayed there, try your current password. -
Macbook pro charger powers my macbook but will not charge it
This is the third charger I've had for my Macbook pro, but this time my problem is slightly different. In the past my charger has completely died out (would not connect to Macbook to charge). Currently when I plug my charger in, the Macbook recognizes that it's plugged in and allows it to power on, but fails to charge at all. It maintains power as long as the charger is connected but never charges. Please help!
Check your cycle count and see if you've exceeded the limit.
http://support.apple.com/kb/ht1519
If so, it's probably dead. If not, well, it's still probably dead.
If you can, try another charger and see if it takes a charge. -
I have just updated my iphone to ios6 and now my music will not update?
I have only heard bad things about the ios6 update, hence why i have been postponing up dating it.
so i finally do update it and now this?!
When i re sync the music it will not update at all :/
if any one knows how to help it would be muchly appreciatedSee if this helps
http://support.apple.com/kb/TS1559
if not, it is a hardware failure. Contact Genius bar for evaluation and possible replacement. -
I am trying to backup the movies and TV show that I purchase from Itunes onto a cd or DVD, and nothing seems to work. I tried using CD-R, CD+R, DVD-R, DVD+R, DVD-RW and DVD+RW and they all failed. Is it possible to back up to an external hard drive instead of a CD?
TylerI know this isn't a complete answer because I am not sure why or if your backups to CD/DVD are not working, but one thing I do know is yes you indeed can backup any of your iTunes Media (music, movies, tv shows, podcasts, etc.) to an external hard drive. In fact, it's recommended that you do this anyway (in case of a hard drive crash, computer being stolen, etc.)
You can manually back up your movies by finding them in your iTunes Media folder, or since you have a Mac you can just use Time Machine, which will automatically back up either your entire computer (or only certain folders and items if you want). It's pretty handy. I use a 1TB external and Time Machine to keep everything backed up including my iTunes -
I am getting really ******, been working on this for a couple of hours and appletv tells me to turn on the homesharing on the computers i want to share with.
Never recognizing them.
Apple is on the network thru ethernet, antd the others through wifi.
Any one know why this is happening?
Please help.Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.
-
Hello, I have a 2009 iMac, and my harddrive has failed several times now.
I tired to reinstall snow leopard with the install DVD that came with my iMac. However the disc is damaged so I bought a new Snow Leopard but my iMac wont read the new disc, it just stays in the apple logo screen, I have tired safe boot, holding down the "C" key on startup and tried using disc utility but getting nowhere.
Please help. Thanks.Might be related, if your hard drive is a 1TB drive,it could be a Seagate drive.
The drives are known to fail and your iMac maybe covered for free replacement under the Apple's Seagate hard drive replacement program until April 12 of this year.
I Believe the 2009 models are covered under this replacement warranty.
You can find out if you are eligible here.
http://www.apple.com/support/imac-harddrive/
Good Luck! -
I have changed the CPU on my pc and now Potoshop Elements10 will not load.
I've just updated my computers CPU and changed the clocks and BIOS so that I could run Premiere Elements 10. This went ok And Adobe are going to update this program .
BUT the problem I am having now is that the Photoshop Elements 10 won't load an it's saying that Iv'e got it loaded on 2 computers and that one must be disabled or the program wont run in so maney days
I have not changed the hard drive and only have one copy loaded on the drive I have tryed to cotact Adobe about this but am having trouble with that, and thought someone may have had a problem like this.As this is a user to user formum mostly, only adobe support can sort out activation problems such as yours:
http://www.adobe.com/support/download-install/supportinfo/ -
I cannot get the welcome screen to pop up so that I can complete the download of Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.4; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.3; OfficeLivePatch.0.0)After you download '''Firefox Setup 3.6.3.exe''', you must double click on this file. Usually, you can find this either on your desktop or in your Downloads folder.
Your Downloads folder is located inside Documents. -
My disc drive on Mac Pro will not read installation dvds
I have been trying to install some software on my Mac Pro - OS 10.8. It will not read the installation DVD. It acts like it is blank. I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!
Please help I payed a lot for this software and cant use it.persyna wrote:
...I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!...
Since you're on your second optical drive, does the new one (and, for that matter the old one) read any optical disk? If it does, then there might still be something wrong with the disk from that manufacturer. If no disk is readable, I'd doublecheck the cabling to the drive. I'd also call OWC tech support. I've dealt with them for many years and they've always been very helpful with any problems.
As far as the software goes, you bought a license as well as an installer disk. Does the manufacturer have a website from which you could download a trial version of the software that could be converted to a full, operating version with the license key that should have come in the box with the disk?
Maybe you are looking for
-
Changed G/L Account in Purchase Order
Hi folks, Why is it, that I can change the G/L Account in my purchase order AFTER I have booked a goods or invoice receipt? Can I prevent that from happening? I don't want to have the g/l account changed after I already have booked an goods/invoice r
-
Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive. I already know that you can partition the internal hard drive to do the very same. Idon't want to use any of the internal space to run wi
-
Okay, I give up, I've searched online and in several forums, pored through the Director documentation, and can't find a single tutorial explaining how exactly to use the Flash component Radio Buttons in Director. And apparently I'm not alone, about a
-
Keychain won't remember passwords
after upgrading to SL the keychain no longer wants to remember any passwords. this is effecting ALL passwords, both online and off. The ones already in the keychain do not work anymore. Any assistance is much appreciated Thanks
-
[iPhone SDK] UIDatePicker doesn't move
Hello, I created a UIDatePicker directly in my UIAppDelegate class. The picker appears on my screen but I can't move it. If I add programatically ask it to move with animation the picker date changes. It seems the picker isn't enabled or doesn't get