HT204384 My SD card wont read in FInder but will show in disk utility, any advice?
Hi, my card reader started to become inconsistant over the last week and it has now stopped reading cards all together. It will show up in Disk utility so i can format it etc but it just wont show in the Finder section. When i remove the card without prompting, i get the 'Failed to eject properly' message. Any advice would be appreciated. I only purchased in Nov 2011 brand new so not sure what operating system it is but you may know from date of purchase.
Thanks
Rob
I had this problem too on my MBP mid-2012 running Mavericks. SD cards (in MBP slot or USB reader) would not show up in Finder. I was able to see them mounted in Disk Utility. What tipped me off that they were in fact mounting (and led me to check Disk Util) is that the OS complained of improperly ejecting the sd card when I removed it.
To clarify what BDAqua said, but I didn't understand until I saw another thread, here's what fixed my problem: Click on 'Finder' 'Preferences', select Sidebar tab and tick the box 'external disks' in the Devices section.
Now my sd cards show up. Thanks!!
Similar Messages
-
Can't see drive in finder, but see it in disk utility
Hi everyone!
I have a SeaGate drive I've use as my project folder drive. All of a sudden I cannot see it in finder under "devices". If I go to disk utility, I can see it there. I ran a "verify" and "repair" and everything comes out fine. No issues. If I right-click on the drive (in disk utility) and say "open" and I see and work on my files. I did notice that after hitting "open" the drive icon shows ghosted... see attached images. The drive in question is "MTP Server". Any idea why this is happening? Thanks in advance!It may mean it has suddenly gained a 'hidden' flag, which would also explain why you can access it whilst being oddly absent from Finder.
One way to check is to open up Terminal and type:
cd /Volumes
ls -laO
The two l are lower case L and the O is a capital o. You should get an output like:
drwx------@ 52 owner staff hidden 1768 Jul 25 16:05 VolumeName
drwx------+ 11 owner staff - 374 Apr 13 16:41 OtherVolume
Look for the entry saying 'MTP Server' in place of 'VolumeName' and see if the word 'hidden' shows up in the same place as the first example above, or whether there is just a hyphen in place of that word like the second example. -
My external HD will show in Disk Utility but not in Finder
Here is the External hard drive info.
Type : Partition
Disk Identifier : disk1s2
Mount Point : Not mounted
File System : Mac OS Extended (Journaled)
Connection Bus : USB
Device Tree : IODeviceTree:/PCI0/EHC2@1A,7
Writable : Yes
Universal Unique Identifier : A15B5F63-3A83-30E2-B2D2-7EF07CF136BE
Capacity : 999.86 GB (999,860,912,128 Bytes)
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : No
Disk Number : 1
Partition Number : 2
It will show up in Disk Utility but not show up in finder. Ive tried mounting it, verifing it, repairing it. Nothing is working. I dont know what else to do! Please somebody help! I was in the process of backing this up when this happendAlso, here is the log of my disk utility with my external. Im not sure if that will help at all
===== Tuesday, September 3, 2013 11:18:20 AM Pacific Daylight Time =====
2013-09-03 11:18:24 -0700: Verifying partition map for “Seagate Backup+ RD Media”
2013-09-03 11:18:24 -0700: Starting verification tool:
2013-09-03 11:18:24 -0700: Checking prerequisites
2013-09-03 11:18:27 -0700: Checking the partition list
2013-09-03 11:18:27 -0700: Checking for an EFI system partition
2013-09-03 11:18:27 -0700: Checking the EFI system partition’s size
2013-09-03 11:18:27 -0700: Checking the EFI system partition’s file system
2013-09-03 11:18:27 -0700: Checking all HFS data partition loader spaces
2013-09-03 11:18:27 -0700: Checking Core Storage Physical Volume partitions
2013-09-03 11:18:27 -0700: The partition map appears to be OK
2013-09-03 11:18:27 -0700:
2013-09-03 11:18:27 -0700:
2013-09-03 11:18:43 -0700: Verifying and repairing partition map for “Seagate Backup+ RD Media”
2013-09-03 11:18:43 -0700: Starting repair tool:
2013-09-03 11:18:43 -0700: Checking prerequisites
2013-09-03 11:18:43 -0700: Checking the partition list
2013-09-03 11:18:43 -0700: Adjusting partition map to fit whole disk as required
2013-09-03 11:18:43 -0700: Checking for an EFI system partition
2013-09-03 11:18:43 -0700: Checking the EFI system partition’s size
2013-09-03 11:18:43 -0700: Checking the EFI system partition’s file system
2013-09-03 11:18:44 -0700: Checking all HFS data partition loader spaces
2013-09-03 11:18:44 -0700: Reviewing boot support loaders
2013-09-03 11:18:44 -0700: Checking Core Storage Physical Volume partitions
2013-09-03 11:18:44 -0700: Updating Windows boot.ini files as required
2013-09-03 11:18:44 -0700: The partition map appears to be OK
2013-09-03 11:18:44 -0700:
2013-09-03 11:18:44 -0700:
2013-09-03 11:18:46 -0700: Verifying volume “Steven Polanco Mac”
2013-09-03 11:18:46 -0700: Starting verification tool:
2013-09-03 11:18:46 -0700: Checking file system2013-09-03 11:18:55 -0700: Checking Journaled HFS Plus volume.
2013-09-03 11:18:55 -0700: Checking extents overflow file.
2013-09-03 11:18:56 -0700: Checking catalog file.
2013-09-03 11:19:10 -0700: Checking multi-linked files.
2013-09-03 11:19:10 -0700: Checking catalog hierarchy.
2013-09-03 11:19:22 -0700: Checking extended attributes file.
2013-09-03 11:19:34 -0700: Checking volume bitmap.
2013-09-03 11:19:35 -0700: Checking volume information.
2013-09-03 11:19:35 -0700: The volume Steven Polanco Mac appears to be OK.
2013-09-03 11:19:35 -0700: Repair tool completed:
2013-09-03 11:19:35 -0700:
2013-09-03 11:19:35 -0700:
2013-09-03 11:19:39 -0700: Verify and Repair volume “Steven Polanco Mac”
2013-09-03 11:19:39 -0700: Starting repair tool:
2013-09-03 11:19:39 -0700: Checking file system2013-09-03 11:19:39 -0700: Checking Journaled HFS Plus volume.
2013-09-03 11:19:39 -0700: Checking extents overflow file.
2013-09-03 11:19:40 -0700: Checking catalog file.
2013-09-03 11:19:54 -0700: Checking multi-linked files.
2013-09-03 11:19:54 -0700: Checking catalog hierarchy.
2013-09-03 11:20:06 -0700: Checking extended attributes file.
2013-09-03 11:20:18 -0700: Checking volume bitmap.
2013-09-03 11:20:19 -0700: Checking volume information.
2013-09-03 11:20:19 -0700: The volume Steven Polanco Mac appears to be OK.
2013-09-03 11:20:19 -0700: Volume repair complete.2013-09-03 11:20:19 -0700: Updating boot support partitions for the volume as required.2013-09-03 11:20:29 -0700: Repair tool completed:
2013-09-03 11:20:29 -0700:
2013-09-03 11:20:29 -0700: -
I have problem to read my HDD, but it appears on Disk utility how can I fix it Please?
Hello, How are you and thanks for your time to review my question. it's been like 8 months my Macbook pro stop reading my 1TB HDD but I have noticed that I can read Flash Drive. whenever I connect the HDD to the computer and I Check on Disk utility it appears but not on my desktop. I have connected the HDD on several computers and it's working perfectly. Please help me solve this issue.
Sorry I didn't notice that the pictures weren't inserted
I did click on mount and I have this message I'm going to run first aid and see if it would work
Yeah it has been eight months. the problem is that i had an HDD before that one it stops working because of a fall and obviously that one didn't work on my computer and neither on others so I bought a new onethat has no defect since it works perfectly on other computers Mac and PC but doesn't show up on mind I can't access my files like I told you previously and the funny fact for me is that DU can see i have a disk connected.
PS: i did run first aid ----> verify disk---> Repair----> and try to mount again-----> but same mount failed result
Sig Really appreciate your attention to my case, hopefully there's a solution. -
My ipod has recently stopped charging through my laptop but will still charge through the main socket - has anyone any suggestions to rectify this problem
Try a different USB port. Also, does it show in iTunes on your computer?
-
Itunes wont read my iphone but will read my ipod nano?
Neither me or my wife can get our iphones to show up on Itunes, but my ipod nano shows up just fine. I went through all of the troubleshooting process and still nothing. Can someone help, i have a 3gs and my wife a 3g.
I'm having the same problem. My iPod Classic syncs up with iTunes and charges fine, but when I plug in my wife's iPhone 3G (may be 3GS) it doesn't do anything; it doesn't charge, it doesn't mount, it doesn't show up anywhere. There's no response to either my iMac or her iPhone, as if it isn't plugged in at all.
I've tried different cords, different ports, restarted the computer, restarted the phone... ugh...
I'm using iTunes 10.4.1, Mac OS 10.6.8... I've gone through the Troubleshooting Assistant at http://www.apple.com/support/iphone/assistant/itunes/
The iPhone is charged... never had a problem before; synced it previously with no issues. -
SD card not shown in Finder, but shown in iPhoto
Hej all,
I have a problem with my SD card. It was shown by Finder on my iMac and it was shown in iPhoto too. Since a while no SD card is shown in Finder, but each SD card is still recognised in the Finder. I have a guess: I think, that I unconciously moved the SD card from the Finder to the s Desktop. Since then it's not in the Finder anymore, but also not on the Desktop.How can I get the card back also into the finder?
Hope someone can help me.
MarkusSee if pressing the Eject key ejects the disk. If it works, restart your Mac then re insert the disk.
-
In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
Thank you!When you erased the disk did you select Mac OS Extended Journaled as the format option?
-
I have set up 3 ipod today and now the 4th one wont connect to itunes, but will charge from a power point
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Try another cable. I dubt it will help but do it since you have more cables
- Try another USB port
- Try on another cable. Again I doubt it will do anything
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
External Hard-Drive not showing in Finder despite no errors in Disk Utility.
I have tried to follow certain steps as described in this community but I am at a loss on next steps here. I have a wester digital that I have used for Time MAchne which all of a sudden does not appear on Finder. I have run Disk Utility and I can see it there and run the verify and repart and it reports no problems...
Here is the results of Terminal Query:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 120.5 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS My Passport 999.8 GB disk1s2 -
Wd my book shows in disk utility but not in finder
can open the drive from within disk utility and a regular finder window will pop up. all data is intact. verify and repair show no issues. have checked finder preferences for showing external drives.
Do know the name of any file that is on the iso image? If so, do a Spotlight search on the file name and see if it show up. If it does, Command click on the result in the Spotlight list and see if the enclosing folder opens in Finder.
Francine
Francine
Schwieder
PS--Forgot to aske: when you said "shows in Disk Utility" I'm assuming it is shown not just as existing, but as being mounted.
Message was edited by: Francine Schwieder -
Mounted .iso file shows in Disk Utility, but inaccesible through finder
Hello.
I have an .iso file that used to mount flawlessly, but now when double clicked shows only in Disk Utility, while remaining inaccesible otherwise (finder hierarchy starting from computer should show all mounted drives, but this one is missing). Disk Utility doesn't find any errors. Is there any other way to find out what's wrong?
thanksDo know the name of any file that is on the iso image? If so, do a Spotlight search on the file name and see if it show up. If it does, Command click on the result in the Spotlight list and see if the enclosing folder opens in Finder.
Francine
Francine
Schwieder
PS--Forgot to aske: when you said "shows in Disk Utility" I'm assuming it is shown not just as existing, but as being mounted.
Message was edited by: Francine Schwieder -
Media Card wont read on the BB
I have read through the forums on various help that is provided for this problem but for me non of it helped.
When i put my media card on it wont read it unless i turn mass storage mode On, but when i turn it off it will read it on the BB but not on the pockemac sync program and wont recognize it as a media card.
I am using a mac so i dont know if that is a problem but help would be greatly appreciated.
thxHi and welcome to the forums!
Leave masws storage mode enabled. It allows you PC to access the media card to load data.
You can also set it to not prompt you to open mass media mode when connected.
Just to make sure, make sure these options are enabled:
Media Card window ON
Encryption NONE Mass storage support ON
Auto enable when connected YES
On your media card do you have these folders?Blackberry
Pictures
Music
Ringtones
Videos
Voicenotes
This is the folder structure that the Blackberry needs to allocate the media to.Do you have these folders on your media card?
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Message Edited by Bifocals on 10-25-2008 07:37 PM
Message Edited by Bifocals on 10-25-2008 07:39 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
SDHC Card not recognized in finder but shows up in disk utility.
I have an SDHC card that I can only find in the disk utility. When I try to verify it won't. It also won't let me try to restore it.
Info:
Macbook Pro
Mac OS X 10.7.4
32 GB SDHC
I have also tried this on a 24" iMac that is also 10.7.4 with the same problem.Very bad.
If select the SDHC card in Disk Utility, what does Disk Utility have to say about it?
Allan -
Macbook pro wont find my ocz ssd in disk utility
i tried upgrading my hard drive to an ssd. created a bootable drive via usb. installed ssd, partitioned it...started downloading os x lion and my macbook restarted. it wouldnt load anything, an image with a file with question mark came up. so i once again put the usb in. it came up with the install menu...clicked disk utility andtried to locate the ssd and it is nowhere to be seen? what can i do??? someone help please
check for updates here. there were problems with sata III in 2011 MBPs, update should cure it.
check that drive is firmly connected (and alive).
Maybe you are looking for
-
How long does it take to repair a damaged cable?
I am wondering if anyone reading this can advise me. I'm sorry if it's a long read. Grab a brew and a biscuit My partner and I live in a small cottage adjacent to a working farm in Wales. For the third year running, the farmer has ploughed the field
-
Bluetooth Speaker sometimes missing in the output list
Hi all ! My computer runs on the latest version of Gnome Shell, with pulseaudio as the sound manager. I have a bluetooth speaker (Creative D100); I can pair it with my computer without any problem, but *sometimes* after having paired it successfully,
-
Warning Message only if 1 to 3 fields do not equal 100%
I have 3 potential fields that will be completed. If Field1 (Primary Beneficiary) is 100%, then the user will leave Fields 2 and 3 empty. If Fields 1 and 2 equal 100%, then Field 3 will be empty. Otherwise they will have values in Fields 1, 2, and
-
How to display folder.jpg in iTunes ?
I have a file called folder.jpg in each album directory which contains album art. How do I get iTunes to display this.. 1. in iTunes 2. on my Nano ? Thanks
-
Can I operate the view object outside application module?
I publish a Application Module into Oracle 8i Server. When I operate the view object in a class that published in Oracle 8i Server. It raise a remoteException. Can I operate the view object outside application module?