HT204387 Bluetooth problems with car sync

I did the latest update on my iphone 5. Since the update, I keep having problems while trying to listen to my audiobook via bluetooth in my car. It is "Skipping" constantly. I did not do that before. What can I do to fix that?

unfortunately theyre's not much you can do, it's a connection thing.. just try clearing some memory and simple thimgs like that

Similar Messages

9860 Bluetooth problems with car hands-free

I have a Torch 9860 that has problems with my new 2012 Hyundai Santa Fe. I can pair it with the bluetooth in the car, and it will sometimes keep the connection on the next trip, but usually I get a 'connection failed' message.
If I revert to the previous OS version, the problem goes away. I had to have the phone replaced recently, though, and the problem is back. It works great with a Jabra earpiece, but not with the car. I could do the same downgrade, but I would prefer not to.
Any ideas, please?
Thanks!
Solved!
Go to Solution.

Another user posted, and it worked for me ... go into the properties of the Bluetooth connection and disable everything except 'handsfree dialing.' You will probably then have to re-pair. You won't get streaming music, but I never use that anyway. Hyunday is supposed to be working on a fix, and gave me a rough date of the end of the month. Good luck!
Dave

Bluetooth problem with car system -- HELP PLEASE!

New IPhone owner. Want to/have to use Bluetooth for hands free driving. Efforts to "pair" phone with car's system unsuccessful so far. Help would be appreciated.
Specs: IPhone 8gb purchased yesterday. Running Version 1.1.3. Vehicle is 2008 BWM X5.
Advised by BMW Bluetooth techs to try to get download of version 1.1.2 because vehicle's system may not recogize 1.1.3.
OK, how do I get 1.1.2? If I get it, will it erase 1.1.3 on IPhone? How do I speak to an Apple/Bluetooth/vehicle expert?
Thanks in advance.

Did you call Apple Care? They could at least walk you thru the sync. Mine took a few attemps to sync with my Landrover's bluetooth.

Iphone bluetooth problem with car stereo

I bought a third party bluetooth adapter for my car stereo. Hooking it up with any other device ( other mp3 players, my husband's windows phone ) all work and stream music. Pairing it with my iphone 5 causes constant crackling and static like blown speakers. Same with the ipod touch. Is there a setting in the phone that will fix this?
Thanks

I had same issue on iPhone 4 using "ebay" type adapter but improved it
with Blackberry bluetooth receiver
I however now have iPhone 5 wired in for perfect results

Bluetooth problem with car deck ...

I bought both myself and my wife an iPhone 4 (iOS4.1) this fall (altho mine is ~6 weeks older -- she wanted white ...<g>...), and then bought us each a Pioneer DEH-P6200BT for each of our cars. I had hers installed first, and it continues to work and connect perfectly. Mine, on the other hand, works but I need to force the connection every time I get into the car. I can either use the deck to select the device and initiated the pairing, or I can use the iPhone's bluetooth settings to request the pairing (neither involving the PIN - I just need to give each device a manual poke).
Relative to my wife's working properly, mine should as well -- it's almost as if there's a switch somewhere that I've overlooked. One difference between mine an hers however, is that I have 2 devices listed for my iPhone, a Plantronics bluetooth headset and the Pioneer deck, whereas her iPhone has only the deck. Has anyone noticed automatic pairing problems when more than one device are on the iPhone's list? Is this normal? Please advise ...
TIA & Holidays' cheerios from the Avalon Peninsula

After the ios 4.2 jailbreak today I finally solved 2 of my most annoying problems between iphone4 and the Pioneer BT200.
1) +Always had to manually initate the connection.+ If you drill down into settings, general, bluetooth, connect up the device... then KILL settings (which leaves your phone in a discoverable mode) If jailbroken you can use SBsettings to kill the process. If not jailbroken, you might get lucky by switching apps then toggling off settings in the multitask bar. This will work until you power off the phone, but many people don't bother for weeks at a time.
2)+I use a USB dock cable for ipod, pandora, app interface, but once the bluetooth connected, bluetooth AUDIO took over and killed the docked audio streams.+ A free jailbreak app called Bluetooth profiler allowed me to turn of A2DP (the streaming audio part) per device. Now the dock is free to handle all of the audio and hands free works perfectly.
I'm posting this because googling for WEEKS did not solve both of these issues. Good luck to others. It seems pointless that we need to find cobbled work arounds in 2011 for what should be basic connection options.

Bluetooth problems with car and iOS 8

Since I uploaded the new iOS 8 on my iPhone 5s I can't get the bluetooth connection working anymore in my Volvo XC60. It pairs but then it doesn't work. Can't receive calls, can't make calls. Nothing happens! It just says "Calling" and the number shows, but nothing happens. I tried also to pair my old iPhone 4 which has iOS 7.1.2 and that works great, just as my iPhone 5S did before with the iOS 7.1.2 version. So this really seems like an iOS 8 issue, unless something has happened with the bluetooth hardware in my iPhone 5S... Any ideas?

Hello,
I have an iPhone 4 and iPhone 4S under 7.1.2 and they work perfectly with my car bluetooth (Land-Rover).
I have now an iPhone 5S, that was delivered with iOS 7.1.2 and after updating in OTA mode to iOS 8, it worked fine also with my car.
BUT I preferred to make a clean install of iOS 8 on the 5S (bad idea ...), and now it does not work anymore, I can pair and connect the phone with the car, but it is impossible to send or receive a call and the car says "no signal" (for GSM network).
After resetting network preferences, the car sees the GSM network again (but impossible to send or receive a call ...), and after rebooting the phone, the car says "no signal" again (and of course no call).
I have tried to unpair, pair again, reset again network preference, but no succes.
I think that obvioulsly iOS 8 is faulty, and Apple guys, if you read me, I think it is really a pitty from Apple to deliver this OS with such bug without giving possibility to downgrade !!! (if possible, I would immediatly come back to iOS 7.1.2, waiting for the fix).
I HOPE it will be fixed quickly now !!!

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problems with mobileme syncing ...

Hi everyone. I'm having massive problems with mobileme sync with my iphone, my macbook and MacPC G5. Essentially I want the iphone contacts and calender data to overwrite anything on laptop and pc but I keep getting message that contacts couldn't be synced due to inconsistent data. Despite me overriding it. I'm not sure how I go about confirming that the computers data is valid and actually whether I want to because its the iphone data I want. Then despite saying its synced calenders its not updating on my macbook or PC ... any suggestions gratefully received. Its doing my head in! Oh I'm on Leopard OS.

Hi Chris, Thanks for the advice, I haven't tried that yet. Will do so and pray that it will work. This however doesn't solve the problem of appointments I'm putting on my iphone not updating on PC and laptop - they do however update on mobile me cloud! Any advice greatly appreciated!

Problem with config sync between two CSM-S modules

Hi everybody,
I have a problem with config sync between two CSM-S modules.
I am using CSM-S software version 2.1(8).
The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
Failover seems to work fine:
switch-active#sh modu csm 2 ft
FT group 1, vlan 398
This box is active
Configuration is out-of-sync
priority 150, heartbeat 3, failover 40, preemption is on
switch-standby# sh modu csm 2 ft
FT group 1, vlan 398
This box is in standby state
Configuration is out-of-sync
priority 80, heartbeat 3, failover 40, preemption is on
The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
switch-active:
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049: FT CONFIG SYNC: Failed config sync entity send
switch-standby:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
Maybe someone has the same problem?
kind regards,
Christoph

Hi Christoph,
I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117. You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 . Apparently this is fixed in ver 12.2(32.8.11)SX323 .
I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
Regards,
Brandon

How to fix the Bluetooth problems with the Treo

It’s pretty obvious by now that Palm had not intentions of addressing the Bluetooth problems with the Treo smart phones. As for me, I need to reset my Treo 700wx several times a day to keep the bluetooth connection working. At my house it simply does not work because I live in a rural area where my cell signal drops out continuously, only for a moment but that’s all it takes for the Treo loose the Bluetooth connection.
I’ve searched here on this board for a solution only to find out that I’m not the only one with this problem. I’ve searched the Internet and could not believe the endless complaints about this problem, not a single fix was to be found. I will be going to every single site I can find on the Internet where I can leave a review of this product and I would encourage others with the same problem to do the same.
Post relates to: Treo 700wx (Verizon)
Post relates to: Treo 700wx (Verizon)

The "Mobile Device" you see only shows what is on your Treo when ActiveSync is running and connected. When it's not connected, there is "nothing". This is good when you want to copy a file you have saved in RAM (main memory). Connect your Treo and have Activesync run (successfully, of course). Then, you will see all the accessible files on your Treo.
Please read the previous reply (I have added and edited it to respond to some of your questions). Also, since I have the Card Export 3.14 for the WM5 and 6 running and it works on my Treo 750, I believe it should also work for you. I have WM 6. Earlier versions of Card Export actually "broke" Activesync for me. It wasn't until very recently that I wanted to try it again, in hopes that they have fixed the bugs. Apparently they have and I now use it to "fix" Activesync when it doesn't want to connect.
So, the latest version is 3.14 and it supports WM 5 and 6 (although they incorrectly named it Windows Mobile 2005/2006).
Post relates to: Treo 650 (Rogers)

C7 - Bluetooth connection with car kit - problem

Hi all,
Can anyone help me about my problem. I bought new phone Nokia C7 with Anna software and I have a problem with pairing with my car (Bluetooth device Parrot CK3000 Evo). I think that the problem is with phone, because when I paired devices all things work well, but when I turn off the car (Parrot is switched off) and go away, other phones that I previously used disabled connection and can be used normally. But with this phone I see that for the phone connection still present (?!?) The car symbol on display still shown, and when I try to use the phone, I can make call, other people say that they receive calling , but I can't hear them, and they can't hear me. When I manually disconnect Bluetooth device, phone work normally, but when I am in the car again, two devices doesn't initiate pairing, and again I have to do this manually. It' a huge problem for me.
Is there anyone who have the same problem, or anyone who know how to solve this. I couldn't find option to solve this from menus.
Any ideas?
Unfortunately my warranty doesn't allow me to change software version from 022.014 to another... but if this will help...

Thank you for your reply,
Do you think, that the solution is new update for Parrot device?
As I understand, you still have the problem and your hope is this update eventually.
Do you read somewhere something about this?
I have registration in Parrot forum, but I haven't read inside anything about the problem . It looks, that they never heard about it...

Iphone 3gs with ios5 update. bluetooth connection with car problem.

I updated my iphone 3GS to IOS5. After the update, the bluetooth (handsfree) connection to my car (Lexus RX350) does not work anymore. I can connect any other cell phone bluetooth to my car. Only iphone after the IOS5 update is failing. Any suggestions (I reset many times)?

Some people havent had one problem when updating to iOS4, others have been over run with problems. I myself have lost virtually all sound from my loud speaker so calls, txt messages and ipod are virtually unheard now..
Went to my local Genius bar in Liverpool today, complete waste of time, the guy restored it like I hadnt already done that a 100 times, then said oh yeah it is qeit not heard of that one before, to get a new one will cost you £139!!
Yeah right mate, not payin that as its not my fault! did ask him if he ever looks on the Apple forum about faults people are having, and I got a blank look. Told him a thread with tens of thousands people all having the same problem with low sound from the speakers and calls being ended in mid conversation since updating to OS4 seems a bit strange then... another blank look!
Ive lost all faith with apple as a company now and will not be upgrading to a iPhone 4 anytime soon or any apple product, no one seems interested in helping but quick enough to take your money, thats my opinion anyway..
Gaz

Bluetooth connectivity with car

I have recently changed to a Nokia 7230 and when I connect via Bluetooth to my car (Grand Cherokee) with a MyGig system some numbers do not sync across to the telephone address book in the car. I have a 2nd 7230 and the same applies, I have tried a different car at the dealers same problem, so it appears to be a phone compatibility issue. Reverting to my old phone works ok. Any suggestions or ideas greatly appreciated.
Thanks
Les

mch44120 wrote:
Je possède un Nokia 7230 et lorsque je veux le connecter à mon Peugeot 3008 (Wip Nav) via BT, je ne peux âs accéder à la totalité du répertoire. Certains noms sont ignorés, seuls les numéros apparaiseent. Quelqu'un aurait-il une idée ? Merci par avance
No French, please.
I own a Nokia 7230 and when I connect it to my Peugeot 3008 (Wip Nav) via BT, I can't access the entire directory. Some names are ignored, only the numbers appear. Does anyone have any idea? Thank you in advance
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Bluetooth problems with Xperia C4 - Android Wear - Motorola 360

Hello, I have a serious problem with my new Sony Xperia C4 Dual phone
I'm always losing the connection with my Motorola 360 smartwatch.The first time I start everything, I can pair my phone with my watch.
Everything is working fine (watchfaces, apps, notifications, etc).
But randomly (can be 1 hour or can be 1 day, when the phone is too far from the watch, after a phone restart, or ...) the Bluetooth connection is lost and will never come back.
If I could restart the connection that would not be that serious but... I can't!
Android Wear will then start hanging on "Connecting" state and it will not reconnnect until I completely restart the pairing process. The only way is to reconnect is :
1. Delete the watch in Motorola Connect
2. Delete the watch in Android Wear
3. Hard reset the watch (otherwise it's impossible to start the pairing process)
4. Turn off and turn on bluetooth on Xperia C4
5. Disconnect all other Bluetooth devices (like car audio and BSP10 Speaker)
6. Restart the pairing process
The whole process is taking about 15 minutes and 30% of the watch battery. (because every apps needs to be reinstalled) What I did so far and did not fix the random disconnection problem :
-Hard resetted 2 times the phone
-Hard resetted 4 times the watch (2x on 5.0 and 2x on 5.1 Android Wear)
-Restarted many times the phone
-Restarted many times the watch
-Tried with the "Sony Smart Connect App" disabled on the phone
-Tried without any extra app on the watch (uninstalled trackID or Sony Music, for example)
-Updated all the apps on the phone
-Tried with a "Blank" phone and "Blank" watch (did not install ANY application) What I can say :
-The problem occurs even in Android 5.0.2 or 5.1.1 on the watch (Motorola has just rolled out the 5.1.1 OTA)
-The problem occurs with different Moto 360 Watches (tried with the watch of a friend, same problems)
-The problem occurs only on the Xperia C4 (Dual) phone. (works great on a Zopo ZP999, Wiko Highway and Galaxy S3)
-Even after resetting, it is sometimes difficult to find the watch in the Bluetooth list, while every other phone can see the watch perfectly!
-Bluetooth hardware is working perfectly, because I can connect to my car, with my BSP10 speaker and another Bose SLIII Speaker. Additional information for the watch :Motorola 360 Watch Build LDZ220Android Wear 1.1.1.2006643Google Play Services 7.5.76 (2002306-534)Android Platform 5.1.1 Additional information for the phone :Android 5.0Model E5333 (Xperia C4 Dual)Build 27.1.B.1.81Smart Connect 5.7.18.401 (11 june 2015) What I think :
There is something that is preventing the watch from being connected properly in the Sony extra Apps.
I think the Smart Connect and Throw (and maybe other) extra apps are bringing a lot of trouble to the Bluetooth connection with the watch. Since 2 days, Motorola has just rolled out the 5.1.1 update of the Moto 360 watch, the update is now enabling WiFi.
I connected my watch to the wifi and the "Cloud sync" connection is working perfectly in Android Wear.
When there is no Wifi network, the phone/watch are trying to connect back with Bluetooth... and the problems can begin. Other problem : when the watch is connected to the phone, immediatly after making NFC contact with my Sony BSP10 speaker (to pair them), the connection is lost between the phone and the watch. So if I use my speaker i will have to hard reset my watch. In fact... every morning I take my watch and I need to start that f*c*in pairing process because of the software bug on the phone.Can somebody help here?
Is there any update planned? Thanks in advance, Guich

Hello Quester : Like I said, I tried with two different watches ( 2x moto 360) and the problem is still present.
So you can exclude there is something wrong with the watch.
I tried with 5.0.2 and 5.1.1 on the watch and it has no effect. My bluetooth hardware is working fine one the phone, too. (other devices are working, like speakers, car, laptop).So clearly, there is a SOFTWARE issue that drops the pairing and makes Android Wear losing the connection and never coming back. Yesterday everything was working fine until I used the BSP10 speaker, connection with the watch was lost.
I'm absolutely sure the problem is bound to Sony Smart Connect/Throw/whatever because on other phones it works perfectly!

IOS6 bluetooth connection with car stereo

With my iPhone 4S running iOS5, my after-market car stereo bluetooth was able to read my song name, artist name, ect. Now that I upgraded to iOS6 my Kenwood receiver cannot read this data while connected via bluetooth. Since the data can't be read, the steering wheel control to search/skip a song forward or back also no longer works. I tested the car stereo last night with an iOS5 phone and it worked correctly, so I know the problem is related to the bluetooth iOS6.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

HT204387 Bluetooth problems with car sync

Similar Messages

Maybe you are looking for