HT204387 Connecting two speakers to my ipad?

I would like to connect two speakers to my ipad but seem unable to do so, music seems to move from one speaker to another

What speakers are you using?
There are some apps that allow this, however iPad can only connect to one AirPlay or Bluetooth speaker at a time by default. Some Bluetooth speakers have the ability to connect to each other for stereo, but this is built into the speaker, not the iPad.
If you maintain an iTunes Library you can stream to multiple speakers through iTunes on the computer. Apple has the Remote app for iOS which can be used to manage iTunes on the computer as well as the wifi AirPlay speakers. This doesn't work with Bluetooth speakers.

Similar Messages

  • Is there a way to connect two analog mics recording in stereo to the iPad for recording?

    I currently use an M-Audio Mobile Pre to connect two microphones to my MacBook Pro via USB. If I wanted to use my iPad (or even iPhone) instead, is there a way to get the stereo input into the iPad? Would the Line 6 Sonic Port sold via Apple work? Would it take 2 separate inputs and deliver stereo to Garage Band or another recording app? Or is there another way?

    Exactly that -- the procedure is described in the online Help: InDesign Help | Text variables
    Now every time you insert the variable named "# of potatoes", you'll see the text "50" appear (with a minimal rectangular marker to indicate it's a variable), and when you want another number of potatoes, all you have to do is adjust the text in the Variables dialog.

  • I can't connect two shapes in Pages for IPAD, why?

    I was writing a document  in Pages for IPAD and i try to make an organichart, but i can't connect two shapes (two squares) with the "connecting line", i try many times in different ways, but never work. So i decide to try to connect two shape in Keynote for IPAD and in work perfectly.
    What i'm doing wrong in Pages for IPAD?
    thanks in advance
    Juan Pablo

    I found the option that you mention!, and it works!! thank you very much!
    BUT..... i have to change it manually for each object, either when insert the object or copy/paste the object!
    is there any way to set it before I insert and object?
    thanks again
    Juan Pablo.

  • Connecting two external speakers

    hi
    i have one small question: is there any real harm into connecting two external speakers directly to the mac without the help of an amplifier?
    will there be any problems?
    thanx for replying

    I did actually hook 'em up, without the amplifier and it does work with an acceptable level of sound(sounds quite nice) but i need to know whether this will har my mac in the long run.
    I have two JBL column speakers.

  • I want to connect two pair for earphones to my IPAD at the same time is there a recommended splitter or amplifier I should use?

    I want to connect two pair for earphones to my IPAD at the
    same time is there a recommended splitter or amplifier I should use? 

    tracer took the words out of my mouth.  Doing the search I found this one amongst many others.
    http://store.apple.com/us/product/HA828ZM/A/belkin-audio-splitter-35mm-m2x35mm-f

  • Problem connecting two ipads to wifi

    I'm sorry if this has been asked already. I'm having trouble connecting two ipads or an iPad and iPhone to my home wifi. Ive found that if I have an iPad or iPhone connected to my wifi, then i cant connect a second iPad at all. I have to turn the wifi setting off on the connected device, then I have to completely turn off the device I'm trying to connect, turn it back on, then it will accept the wifi password & connect. Long of the short, my friend and I can't use our ipads at the same time on my wifi. Is there a setting I could change on my router to fix this problem?

    Or u cn try chk hw many ip address ur router was set to allocate.
    Another router setting u cn try is set to WEP shared instead of WEP Open. I not sure if this solve, i set to WEP Shared bcos previous my nintendo DS only work with with WEP shared.
    My home network is able to connect with 2 ipad and 2 iphs all at the same time, sometime with an additional laptop. Meeting 5 devices.

  • HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

    I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
    I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
    But I proceed to type the words do not transfer to the screen.
    Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
    How long before they are?

    The BestBuy guys are clueless.  I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
    A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them.  You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

  • HT204387 my iphone ios7.1.1 won't connect to car multimedia , did mannage to connect two other similar iphones

    Iphone 4s ios 7.1.1 won't connect to car bluetooth . on the other hand managed to connect two other identical Iphones and an 8 year old Nokia .
    please help !!!

    Hey CompeauC,
    Welcome to Apple Support Communities! I can definitely understand the frustration, and there are some troubleshooting steps that don't necessarily necessitate rebooting the router. I found a couple of articles that should be able to assist you in resolving the issue, one for your Mac and the other for your two iOS devices:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    All the best,
    David

  • How can I have multiple users on iTunes (in order to connect to a shared office iPad)?

    How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!

    The library exists regardless of which user is logged in.
    The only way around that is to create different user accounts on the computer.
    There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer.

  • Problem connecting two trunks to sip provider using same CUBE

    We need to connect two SIP trunks from service provider to Cisco CUCM 7.1 using CUBE “Cisco 2821”, SP using the following configuration:
    First SIP PSTN Link Configuration(In-Out DID/DOD 218 7700 – 218 7799)
    Customer IP Address =   10.196.191.158/30
    SP IP Address =  10.196.191.157/30
    Protocol= SIP
    SIP Port = 5060
    Transport Protocol=UDP
    Voice Codec= G711 A-Law
    DTMF = IN-Band DTMF without RFC2833
    Signaling IP address = 10.201.20.49
    IP Address 10.201.20.10 (Media IP) must be visible from IP PABX
    Second SIP PSTN Link Configuration( Inbound Only 920009999)
    Customer IP Address =   10.196.192.94/30
    SP IP Address =  10.196.192.93/30
    Protocol= SIP
    SIP Port = 5060
    Transport Protocol=UDP
    Voice Codec= G711 A-Law
    DTMF = IN-Band DTMF without RFC2833
    SIP server IP address = 10.201.20.49
    IP Address 10.201.20.10 (Media IP) must be visible from IP PABX
    When we tried to configure both links on the same CUBE we faced two problems:
    -          Routing issue, as we can’t route traffic using single CUBE through two different interfaces to the same destination “ i.e we have to configure static route commend (ip route 10.201.20.49 255.255.255.255 10.196.191.157 & ip route 10.201.20.49 255.255.255.255 10.196.192.93), sip traffic coming from one link can’t be sure to send it back to the same link.
    -          SIP media & signaling control binding issue, as CUBE support sip binding using one interface only “one IP Address”, if we not using binding commands on the CUBE we can’t receive any calls though any link.
    We have two options:
    SP to send both traffic on the same trunk link
    Or
    Have another CUBE for the second link.
    Attached network diagram.
    Any solution?????
    Regards,
    Ahmed Rizk

    I didn't mean NAT CUCM, I meant the interface towards it. But since you're using a single interface then yes that is what you NAT. You have a lot going on in that config. Probably a lot more than you need. Like I said you should work on this in two legs. CUBE to ITSP, and then CUCM to CUBE. You're trying to make the whole thing work in one shot which is going to cause you some headaches.
    Install XLite free version. In the account settings set your UserID to a generic 10 digit phone number, domain to something generic, then at the bottom set the Proxy Address to the IP of your CUBE. The media ports will be negotiated dynamically between the CUBE and the ITSP. Since you said you're not registering you will also need to give the ITSP YOUR peer IP (this is how they secure the trunk) which is whatever IP you're sourcing from when you leave your network (what you're NAT'ing the CUBE to).
    For testing, reduce your config to something like this:
    voice service voip
     allow-connections sip to sip
     allow-connections h323 to sip
     no supplementary-service sip moved-temporarily
     no supplementary-service sip refer
     signaling forward none
     sip
    dial-peer voice 10 voip
    description CUBE_TO_ITSP
    session protocol sipv2
    session target ipv4:SIGNALING IP PROVIDED BY ITSP
    destination-pattern [2-9].........
    codec g711ulaw
    dtmf-relay rtp-nte sip-notify
    no vad
    dial-peer voice 20 voip
    description ITSP_TO_CUBE
    destination-pattern .
    session protocol sipv2
    session target ipv4:Eventually your CUCM IP...for now set it to your computers IP.
    codec g711ulaw
    dtmf-relay rtp-nte sip-notify
    no vad
    Use XLite to place a phone call from your PC (if you have a mic and speakers you can have audio if the call connects). This should come pretty close to getting your outward leg established. Once you get this part working you can add in more codecs and translation profiles if you want. Let me know what happens. Include any debug or packet cap results if you can.  

  • Can i connect two monitors to my mac book pro with HDMI?

    can i connect two monitors to my mac book pro with HDMI?

    I retract my previous "No." If you can live with limited performance (slow refresh/choppy action video/no gaming) on the second external monitor, you could use a USB video adapter and a DVI-HDMI adapter to connect it to a USB port on your computer.
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
    Just a note about the system information that appears below your post: iOS 4.3.3 does not run on Macs, only on iPods, iPads and iPhones. When you're posting about your MBP, it would be more useful to those responding to know which version of Mac OS X you're running. Doesn't matter for purposes of this post, but something to remember for future posts.

  • I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac.  I have tried all the usual solutions but nothing works.  It has worked recently but not in the last week. Help

    I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac.  I have tried all the usual solutions but nothing works.  It has worked recently but not in the last week. Help

    make sure it's not being connected to by any of the other two
    one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
    automaticly
    then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac

  • Connecting stereo speakers to an iMac

    I am thinking about making the final jump and just trashing my stereo and running all my music through my iMac. Three questions:
    1.) Is the output of an iMac going to be high enough quality to sound good through my stereo speakers?
    2.) Is this done by simply connecting a set of stereo speakers to my iMac through the headphone jack?
    3.) My current stereo is hooked up to three sets of speakers (one set in each of three rooms) and I'm wondering if I can split the output signal from my single headphone jack so that the music comes out of all three speakers.
    4.) I'm incredulous that my little iMac will be able to produce quality sound equal to my stereo system. Am I wrong? (My wife will only allow this change if I guarantee that she won't even notice a difference.)
    Thanks in advance!
    Peter Booth

    Hi Peter,
    1. the output is good enough to run external speakers through (you'd need to have the hearing of a bat to notice the difference. Only the very highest and ver, very lowest of frequencies are lost.)
    2. yes the headphone jack will work (if you iMac has an 'output' jack though, use it instead.)
    3. Yes, you will lose ouput accordingly (is the stereo designed to run two speakers is running six, all speakers will recieve only 1/3 signal, unless you install extra capacitors in your amps to compensate for loss of output.
    4. refer to answer 1
    Kind Regards,
    Peter Miller.
    Message was edited by: Peter Miller

  • Computer speakers for my iPad 2?

    Can I connect my Bose multimedia speakers to my iPad 2? The jack on my Bose speakers seems the same as my earphones.

    Thanks deggie and Diavonex.  The Bose are self powered, but all I got was muffled sound on one speaker.  Plugged Bose back into my laptop, no problem.  I'll keep messin around and maybe get lucky!

  • Hi Guys, I want to buy some mini portable speakers for my iPad 2 so I can watch movies with better sound. Any ideas in what ones to buy?

    Hi Guys, I want to buy some mini portable speakers for my iPad 2 so I can watch movies with better sound. Any ideas in what ones to buy?

    Here's the one I love, the Altec Lansing iM 237. Don't be put off by the small size or cheap price. I have two, one for home and one for my studio/travel.
    http://www.amazon.com/Altec-Lansing-Ultraportable-Speaker-Players/dp/B001ELK2NY/ ref=sr_1_1?ie=UTF8&qid=1303595370&sr=8-1

Maybe you are looking for