HT204389 Volume control issues with BlueAnt S4

Does anyone have a workaround with receiving volume using the BlueAnt S4 hands-free unit? It voice dials just fine, but once it connects, you cannot hear the dialed person (even with the volume maximized on both the unit and the iPhone 4s).

Check - Settings > Sounds > Change with Buttons > On
This locks the ringer volume at whatever the slider above this setting is set to.

Similar Messages

Ipad Keyboard dock: Volume Control issue with headphones.

I recently got an Ipad keyboard dock. I am unable to control the volume when a headphone is plugged in. Is there a setting that needs to be adjusted or is it bad hardware? The dock volume control works well without a headphone though...
Thanks!

While it's nice that they tell you this on the keyboard documentation, it's still very undesirable.
Apple, please update this in a future OS release so I don't have to plug the headphones in every time I doc.
Thank you.

5s Volume control issues

Anyone having volume control issues? My wife's 5s (less than a month old) is having issues with the up volume. If she mutes it using the down volume, it won't go back up. I can get it to work if I hold the volume a long time and it eventually comes back. Or last time i had to remove her case, hold the volume and release several times before it finally kicked in. Any thoughts or ideas? Thanks.

Hi,
Please test in other computer to see if the issue persists, it may be caused by the bad output channel.
But for better solution, I recommend you go to MSDN forum for further help.
http://msdn.microsoft.com/en-US/
Thanks for your understanding!
Regards,
Ada Liu
TechNet Community Support

Is iphone 4 having issues with Blue tooth?. I have checked four iphone brand new sets from different location. Not detecting other devices

Is iphone 4 Having issues with Blue Tooth connectivity ? Last saturday i have bought up iphone 4, when i checked that device blue tooth was not detecting the other iphones. I went to apple store in Ottawa. They checked with their Mac computers. They said Yes this iphone is having problem. Please exchange it on the store you bought up. I have exchanged that iphone with brand new, again same issues...
iPhone is not detecting other devices with Blue Tooth. I have checked with other two. they having same problem.
Please tell me, What apple gonna do with my iphone now ? Should i keep it ? or cancel my contract with cell phone company. As i am sure they not going to replace it again or gonna make excuses.
Waiting for replies [email protected]

I have upgraded my iphone 3 to a 4. I just recently discovered that while the iphone 3 automatically discovers bluetooth but the iphone 4 does not (couldn't discover any bluetooth). My bluetooth is Jabra SP200. It turned out, there are other steps to take with the bluetooth device to pair with the iphone 4. As stated, iphone 3 detected it automatically. But w the iphone 4, I had to press and hold the answer button of the Jabra for it to pair with iphone 4. Call the bluetooth manufacturer directly and check with their alternative pairing procedures.
Hope this helps.

ITunes volume control issue?

Ever since I updated my Mac to iTunes 8.2.1 I've noticed that the volume control in iTunes is fixed on about 40% volume. I can drag the control up or down and it changes the volume but it snaps back to where it was when I let go. I can still change the volume on my Mac but it won't go as loud as it could. Any ideas?

Hey tvas22,
I will do my best to assist you in the hopes of resolving the issue with the sound button. The steps that I would start of with first, would be to do a hard reset. I have included the document Performing a Hard Reset or Forced Reset.
If you are still experiencing the same issue, I would set the communication level to do nothing in the Playback devices option. I have included the steps below for you to follow.
1. Right click on the Sound icon in the System Tray
2. Click on Playback devices
3. Click on Communications
4. Click on Do nothing
5. Click Apply, and close the Window
The next step to do if you are still experiencing the same issue, would be to perform a clean boot on your Split. I have included the document Using Microsoft System Configuration (Windows 8). See if following these steps you are still experiencing the issue.
Please let me know the outcome of these troubleshooting steps.
Best of Luck!
I worked on behalf of HP

SB Audigy2 w/Vista: Creative Volume Control conflict with Windows Volume Control(sndvol.ex

Hi Everyone,
I'm running Windows Vista on a Dell Dimension 8300 with a SoundBlaster Audigy 2(WDM) card. I have a few no-mind questions about how these things all work together:
. After I installed Creative's Vista driver upgrade for the SB Audigy 2 series, I noticed that there are now two volume control icons in the system tray. One is for the Creative Volume Control. The other is the original Windows Volume Control (sndvol.exe). Should these two controls be running at the same time?
2. The Master Volume is a lot lower in Vista than it was in XP. When I let Vista pick the sound drivers the first time around, I figured the lower volume had something to do with those. So I downloaded and installed the Vista SB Audigy 2 Driver Upgrade from Creative's website. The volume is still very low, however, and I have to peak all my volume controls to hear much of anything. Does anyone have any ideas why this should be so?
Thanks to all who took the time to read this! Have a good day,
Big Al Mintaka

Hi DakkonA,
Have you been in contact with Support? I would advised you to get in touch with them to rectify this issue.
Best of luck,

20g gig 4th generation--volume control issue

Hi there!
I bought a 20 gig 4th generation ipod just over a year ago now. I've loved it from the start! Lately I've noticed something amiss in the volume of the ipod. I had a brief search on the forum but didn't seem to find anything in relation to the issue that I'm having.
Basically what I've noticed is that I'm needing to crank the volume up even louder than before in order to hear the music (no i'm not going deaf--my friend told me I have hearing like a bat!)
It's not the headphones--I've still got the original headphones (they work and sound fine in other things); I can hear all the songs, see all the songs, etc--it just seems that I need to crank it up higher than I've had to before.
I've also noticed this in the car when I use the tape cassette adapter. The sound system in the car is pretty good but I noticed I had to crank that up as well as the ipod in order to hear the music. The Ipod had to be cranked almost to full volume.
I don't get the sketchy sounds or distortion that I've seen people mention on the forums here. I've also got the latest firmware installed. Considering the other problems I've read on the forums, I'm considered lucky!
Any suggestions or solutions to what might be going on?
Thanks,
Lea
Self built Windows XP Pro

Basically I'm out of ideas. I will not consider replacing the ipod.
Well, if it's a hardware issue, then I guess you are out of luck.
However, I was considering buying earbuds with built in in-line volume control.
Will this somehow solve my solution?
It may help a little, but if you aren't wanting to have it replaced, what other options do you really leave yourself?
B-rock

Volume Control Issue (Satellite L505D-S5983)

My laptop: Toshiba Satellite L505D-S5983
So here's the issue:
Just recently I've started having problems using my volume control located next to the SD card reader slot.. You know, the volume 'slider'. It's been acting rather strangely, when I try to adjust my volume it doesn't change at all from the current volume percentage that it's at... Even when I'm sliding the slider. So then, I have to go into the manual volume in my hidden icons menu to change the volume. However, after I go through this step, I am then able to use my volume 'slider' control, and it actually works.
So, I'd like to know:
A) Why this is happening?
B) Am I able to fix this issue?
C) How would I fix this issue?
ox♥Scairry♥xo

Still in need of a response.
ox♥Scairry♥xo

Amarok volume control issue

Hi guys.
I've got problem with changing volume in music player such as amarok, juk,musique. After yesterday update phonon It doesn't work anymore.
I'am using Kde4+ pulseaudio +gstreamer,after changing to vlc-phonon sound also not changin in amarok. Please help.
The volume control via kmix work fine.

Anyone figure out a fix yet? I submitted bug report, we'll see what happens,
https://bugs.archlinux.org/task/37724

Source control issues with Azure Pack Web Sites

Struggling to get my Azure Pack Web Sites POC off the ground. Infrastructure is built and I'm ready to deploy a .NET app. I can successfully deploy an app from the gallery and tested and it works so we're good there.
However I'm having an issue with source control and getting an app deployed. We have a local instance of Github enterprise here we use for all code repositories. Can I use this? In my tenant site I have created a new web site and added
an external repository for source control. I put in the HTTP link to my local github enterprise repo and it tries for a minute and returns the following error:
Command 'git.exe fetch external ...' aborted due to no output and CPU activity for 60 seconds. You may increase SCM_COMMAND_IDLE_TIMEOUT setting to solve the issue.
git.exe fetch external --progress
There's nowhere I can specify credentials or SSH keys so azure pack can communicate with my repo (i'm assume this is the issue). I can't put company custom code out on codeplex or public github so that's out. Am I trying to do something that
isn't possible in Azure Pack?

I guess I'm confused. When I go into my web site and click the Setup deployment from source control, under the External repository option it says both Git and Mercurial repositories are supported. This is a different button than the GitHub option
for source code. So what's the point of that option is you can't actually use a git repo?

Sound Volume control gone with earbuds

Is there a setting on an iPhone 4S that would disable the volume control from earbuds? The stop/start works fine, but I cannot raise or lower the volume? Thanks.

Make sure the jack is inserted completely.
Clean out the connector in the iPhone with compressed air.

Lumia 920 volume control bar with extra icons

I am using Lumia 920. When I pressed volume key the volume control bar shows up but there are 3 extra icons play, fast fordward and backward
Does any one know what do those three buttons do? I have captured the screen.
Thanks
TBYU
Attachments:
volume_control_bar.jpg ‏169 KB

If those icons are an annoyance to you, you can install an app called Stop the music. Then after you have finished listening to your music you can use that app which will clear the music control icons from the volume bar.
http://www.windowsphone.com/en-gb/store/app/stop-the-music/0899997d-c25a-4075-9b28-685308e1568b
Ray.

Volume control problem with 30GB iPod 3G, Universal Dock, and Apple Remote

I just hooked up my 30GB iPod 3G to the Universal Doc and tried the my new Apple remote. The only buttons on the remote that work in controlling my iPod while on the dock are the play/pause and the skip forward and back buttons.
For some reason the volume up and down buttons don't adjust the volume on my iPod while it's on the dock. Any ideas? Shouldn't the volume up and down work? Or do they only work on the newer iPods?
Any info appreciated.
17' Aluminum Powerbook Mac OS X (10.4.3) 30GB iPod 3G
17' Aluminum Powerbook Mac OS X (10.4.3)

btabz,
Thanks for your response. No the iPod doesn't respond at all--the volume display doesn't come up or change.
When I press the play/pause or either skip forward or back on the remote, the iPod, while on the dock, lights up and responds to the command as it should. But when I press volume up or down on the remote the iPod does not respond at all.
According to Apple's store info on the remote, the volume up/down controls should work. I am wondering if maybe it doesn't work with the 3Gs for some reason. But if that is the case, Apple should indicate that. It is kind of frustrating to not be able to adjust the volume.
Thanks,
gerb38
17' Aluminum Powerbook Mac OS X (10.4.3)
17' Aluminum Powerbook Mac OS X (10.4.3) 30GB 3G iPod

IPhone 6 (with iOS 8.0.2 Bluetooth Issue (with BlueAnt PUMP HD Sportbuds)

Well, I've got an iPhone 6 with iOS 8.0.2 and I can't pair my BlueAnt Pump HD buds to the phone.... Bluetooth is turned on on both devices but the iPhone doesn't seem to recognize my earbuds, it keeps searching, any help would be appreciated, thanks....

Hey EraVulgaris,
Thanks for the question, and congratulations on your new iPhone 6! It is my understanding that you are experiencing issues using a third-party bluetooth device with your iPhone - The following resources should help troubleshoot any issues you are experiencing:
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/kb/ht6473
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks,
Matt M.

Ipod shuffle 3rd gen volume control issue

I have IPod Touch and IPod Shuffle 3rd gen and I bought a new pair of headphones in the Apple store in London few months back and the headphones were totally fine when used in IPod Touch. Yesterday I put them into my IPod Shuffle and I am experiencing a problem with the volume - I can't put it up or down.
It's not the "limit volume" thing, I already tried that...
Any suggestions..?

Hey paralelopipak,
Thanks for the question. After reviewing your post, it sounds like the headphones have a volume problem only on this iPod. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Resetting iPod shuffle
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT204389 Volume control issues with BlueAnt S4

Similar Messages

Maybe you are looking for