HT204400 getting blank screen on apple tv

I'm getting blank screen on apple tv

Hi dtinlin,
The article linked below details troubleshooting that can help restore functionality to your Apple TV.
Apple TV: Basic troubleshooting
https://support.apple.com/en-us/HT200197
Sincerely,
Allen

Similar Messages

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. When connected to mac get message that phone is in recovery mode and that

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
PPlease help

Hello, Chantal105
Thank you for visiting Apple Support Communities.
If your device is in recovery mode you will need to restore the device.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H.

Mail stopped working. Now get blank screen with icons (delete, file, forward, etc) at top. Then goes blank. iPad 2 purchase 12/11

Mail stopped working. Now get blank screen with icons (delete, file, forward, etc) at top. Then goes blank. iPad 2 purchase 12/11

Try to reset your ipad and/or force quit the mail app
Reset
Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.
Force close an app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Getting Blank Screen

Hi Experts,
We has a custom java application which was deployed on Weblogic 8 in 2 JVM Cluster. Recently we have upgraded the Weblogic to version 10MP3. But sometime users are getting blank screens and once they hit F5 the screen comes back. Users are using IE7 and IE8. We are not able to test on any other browser as that is not certified within the orgnization. Any help will be greatly appreciated.
Issue is intermittent so very hard to troubleshoot/reproduce.
Regards
Shashi

You can check the logging, to see if there are any messages related to the issue.
Maybe this discussion can help (http://social.msdn.microsoft.com/forums/en-US/iewebdevelopment/thread/48e60100-1a28-44ca-b382-774b1b7fb65d)

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Mt iPhone shows unread messages that aren't there! I have held down the power and home buttons until blank screen and apple icon appear only to find it is cleared, but within minutes the unread messages reappear! Please help

Mt iPhone shows unread messages that aren't there! I have held down the power and home buttons until blank screen and apple icon appear only to find it is cleared, but within minutes the unread messages reappear! Please help

Have you restored the iphone through itunes?
You say the unread messages aren't there but then they appear?

Email app won't open. I get blank screen and it immediately force closes. I've rebooted the iPad several times. It still works on my iPhone 5s

Email app won't open. I get blank screen and it immediately force closes. I've rebooted the iPad several times. It still works on my iPhone 5s

Hi Darr4425,
That's not good! We definitely want your device to work properly at all times. What email application are you attempting to open? When did the issue start? Do you receive an error message when the application force closes?
Thanks,
PamelaF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

My iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?, my iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?

my iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?, my iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?

You repeat yourself frequently frequently. Perhaps your iPhone is not charged.
Too, you might look in the section "More Like This", right over here ----->

Using iPhone 5 on IOS6, getting blank screen on App Store Search

Anyone have the similar problem?
It was working fine but out of suddent, everything gone and left with blank screen.
Apple, please act.

Hi,
For some reason there appears to be a multitude of threads on this rather than one big one - so it's a somewhat labourious task having to go through all for an answer!!!
I had this and tried absolutely everything before resetting. However nothing worked. The only way this worked for me is:
Settings
General
Reset
Erase All Content and Settings
Then follow from there. It would be wise to ensure that you have backed the phone up to iCloud or iTunes prior to doing this.
Annoying as I've just come from Android and didn't have any issues with apps there. Doesn't inspire confidence at all, especially as a seemingly widespread issue.

I reset settings. Now has blank screen with Apple . How do I get to load?

I Hit reset setting on mini iPad to see if would help programs from going out. Now. all I have is a black screen with Apple showing with white line below it. Doesn't like trying to open. haven't got it to do updates either. Can anyone advise me on how to get to get ipad restarted again?

Try this. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.

This morning phone had blank screen and apple logo only had to do a soft reset

His morning my iPhone 4S had a blank screen with the apple logo and was beeping. could not turn it off or on. Pressed the on/off and other button on lower front and did a reset. Now it cannot connect to my PC. PC cannot find the driver for my iPhone.

Hello there linda,
It sounds like you are not able to turn on your phone after your phone was behaving unexpectedly. I recommend resetting the phone in the same manner you had tried before, but rather than pressing them and letting them go, hold them down as outlined in the following article:
Turn your iOS device off and on (restart) and reset
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists, I would next recommend putting the device into recovery mode, and then restoring the device with iTunes on your computer:
If you can't update or restore your iOS device
If you are not able to do so and continue to get an error about the driver, you should uninstall and then reinstall iTunes on your PC with either of these articles depending on your version of Windows:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Removing and Reinstalling iTunes and other software components for Windows XP
Thank you for using Apple Support Communities.
Take care,
Sterling

Can not get on iTunes app with iPad mini ISO 7.0.2 get blank screen????!

How do I get iTunes back on my iPad mini iso7.0.2 I get a blank screen fron the app

Hi Pault412!
I have an article here for you that can help you troubleshoot this issue with your iTunes app:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Blank screen on Apple tv with Keynote slideshow

Today I couldn't get to play my presentation in slideshow mode neither on Keynote nor on PowerPoint app From my iPad Air through Apple TV. Slides are visible until you switch to slideshow. Then everything disappears and you see just a black screen. The only solution I could find was play through OneDrive in the browser. You get it on a smaller scale but at least I could use all the animations.
Any ideas?

I Had a similar experience, powerpoint app, keynote, imovie all blank when presenting. Even though ATV and ipad had latest updates.Did a hard reset, hold home button and off button down until you see a black screen and apple logo, of my ipad and all fine now.

Getting blank screen when i try to open workspace first time

Hi All,
I have installed hyperion 11.1.2.2 version with Oracle 11.2.0.1 database. Installation and configuration completed successfully.
Operating System: Windows Server 2008 64 bit
When i try to open workspace, it is showing blank page in the IE 10
error msg:
<May 7, 2013 4:29:30 AM MST> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to RUNNING>
<May 7, 2013 4:29:30 AM MST> <Notice> <WebLogicServer> <BEA-000360> <Server star
ted in RUNNING mode>
*<May 7, 2013 4:29:30 AM MST> <Warning> <Log Management> <BEA-170011> <The LogBro*
adcaster on this server failed to broadcast log messages to the admin server. Th
e Admin server may not be running. Message broadcasts to the admin server will b
e disabled.>
<May 7, 2013 4:37:20 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:61,983 during the configur
ed idle timeout of 5 secs>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090171> <Loading the ident
ity certificate and private key stored under the alias DemoIdentity from the jks
keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090169> <Loading trusted c
ertificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\
DemoTrust.jks.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090169> <Loading trusted c
ertificates from the jks keystore file C:\Oracle\MIDDLE~1\JROCKI~1\jre\lib\secur
ity\cacerts.>
<May 7, 2013 4:38:08 AM MST> <Alert> <Security> <BEA-090152> <Demo trusted CA ce
rtificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyStat
e, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 955019287786924425883848070339045601504642537525227827919067306354412
25109254821799633292360521460473564159575876280112824847724589839778989962768154
40753
public exponent: 65537
Validity: [From: Thu Mar 21 13:12:27 MST 2002,
To: Tue Mar 22 13:12:27 MST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState
, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates sig
ned by the demo trusted CA.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Ent
rust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entru
st\, Inc.,C=US". The loading of the trusted certificate list raised a certificat
e parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2
.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - F
or authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US".
The loading of the trusted certificate list raised a certificate parsing except
ion PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.
11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=
T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate
list raised a certificate parsing exception PKIX: Unsupported OID in the Algori
thmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=
T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate
list raised a certificate parsing exception PKIX: Unsupported OID in the Algori
thmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
loading of the trusted certificate list raised a certificate parsing exception P
KIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\
,LTD.,C=JP". The loading of the trusted certificate list raised a certificate pa
rsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840
.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 20
08 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSig
n\, Inc.,C=US". The loading of the trusted certificate list raised a certificate
parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.
840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
of the trusted certificate list raised a certificate parsing exception PKIX: Uns
upported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008
GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of t
he trusted certificate list raised a certificate parsing exception PKIX: Unsuppo
rted OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:39:00 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:62,088 during the configur
ed idle timeout of 5 secs>
<May 7, 2013 4:42:50 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:62,321 during the configur
ed idle timeout of 5 secs>
Thanks,
mady
Edited by: mady on May 7, 2013 5:27 PM

Did you configure the web server as the last part of foundation services? You could always get a patch for IE support but the blank screen always appears if the services wasn't started up correctly or if the web server wasn't configured lastly after any configuration change.
About the Weblogic here's where you can get more info about your error message: http://docs.oracle.com/cd/E12839_01/apirefs.1111/e14397/LogMgmt.html
"BEA-170011
Warning: The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.
Description
The LogBroadCaster on the managed server could not find a reference to the DomainLogHandler on the admin server. Messages from this server will not be logged in the domain log.
Cause
The managed server might not be able to reach the admin server. One of the possible causes could be due to the admin server being shutdown.
Action
To fix this problem, inspect the exception stack trace, correct the problem. If the admin server is shutdown, restart it to resume normal log broadcasting to the domain."
Just my 2cents...

HT204400 getting blank screen on apple tv

Similar Messages

Maybe you are looking for