HT204400 I cannot get my Apple TV to show WiFi network settings.
I've had my Apple TV connected to internet using an Ethernet connection, and it had been working really good. However, it cannot connect to the internet anymore. I first thought it was a problem with my router, so I disconnected the Ethernet cable to try to connect wirelessly instead. However, even when there is not an Ethernet cable connected to my Apple TV, it reports as if it is, and does not show me the WiFi networks available (in fact, it still shows me the Ethernet connection I used to have).
I tried resetting the Apple TV, restarting it, unplugging it for up to 10 minutes and connecting it back, connecting it with the mini USB port to my computer and restoring it to factory default settings, but still it shows as if it was connected through the Ethernet port.
I then tried to connect it again through the Ethernet port to a router that I am sure is connected to the internet, but I go back to my original problem... which is that it says that it cannot connect to the internet.
Has anybody had this same problem?... if so, how can this be fixed?
Thank you.
I have the same issue an I've tried all the same remedies as you to no avail. You would think that restoring the Apple TV to factory settings would fix it, but you'd be wrong. Wireless is not even an option because the device thinks it's still connected to the wireless.
Similar Messages
-
Cannot get ipod touch to sync with wifi network at home
hi , , no matter how i enter the password on my ipod touch it will not connect to my wanadoo wireless router ? any ideas ? it just comes up cannot connect
i have it set up on wep key securityDo other devices succesfully connect to the network?
Does the iPod successfully connect to other networks?
Try:
- Resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering your router off and then back on
- Resetting network settings: Settings>General>Reset>Reset Network Setting
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id, I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.
Finally got through to tech support and found someone who seemed to know what was going on, he walked me through and using appleid.applesupport got me to a point where i could get a new password for the apple id that kept showing up.
I think you were on the right trail and I want to say thanks for your help. Much appreciated
ccl43 -
how can I sync my Apple ID to my iTunes store sign-in window? An old ID keeps showing in the iTunes sign-in window and I cannot get rid of it to show my current Apple ID. I don't have the password for the old ID in order to "manage" my account and make changes. Help. Thanks.
Did you create a new account or did you update your existing account with a new email address ? You can tap on the id in Settings > iTunes & App Stpre and sign out of it and you can then sign with the new/updated account.
If you did create a new account then your existing content will remain tied to your old account, so only that old account will be able to redownload that content and/or download updates to its apps. If you can't remember the password for it then you can try getting it reset via this page : http://iforgot.apple.com -
WWhen I turn on Apple TV, my television blinks "no signal". I have checked my connections and I am connected to my wireless signal. I've unplugged Apple TV and plugged in again. Now the television screen goes "no signal" to Apple picture" to no signal, and keeps doing this. Yet I cannot get the Apple TV menu to show up. What do I try next?
Sounds like it's run into a firmware problem.
Restore via microUSB:
Restoring your Apple TV - Apple Support -
I cannot get the Apple ID option of resetting my -forgotten password- up. MacBookPro. OS X LION.
How to proceed?
Christian.dkUse Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve -
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Castle15 wrote:
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Cannot get the Apple.. what?
Model and actual device you are talking about?
Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work. -
In itunes, pressing alt to display the menu bar totally worked for my windows running machine but I CANNOT get the menu bar to show in itunes on my imac. what's with that?
You got me experimenting ... and it was viewing the display with the green button (rather than amber) on the left that revealed the menu bar. Hovering didn't do it. Thanks for your help. First time in Apple Support.
-
I upgraded my Macbook Pro to Mountain Lion and cannot get my album artwork to show. Help!
Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.) -
cannot get internet except at home my wife has a kindle and she can connect anywhere
- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Reset network settings:Settings>General>Reset>Reset Network Settings -
i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone
Restore the device.
-
I cannot get the zoom bar to show on my camera (iphone4) I only get a square when I tap the screen?
Your wonderful! Thanks so much, that worked.
-
HT201269 MY I PHONE FROZE ON ME I CANNOT GET IT TO OPEN IT SHOW THE WIRE & I TUNES SYMBOL
MY I PHONE FROZE ON ME I CANNOT GET IT TO OPEN IT SHOW THE WIRE & I TUNES SYMBOL
That means connect it to iTunes on your computer in order to restore it as new.
-
I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?
Hi there pamela123456,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W. -
Is it possible to print from an apple device without a wifi network?
Is it possible to print from an apple device without a wifi network?
I cannot make out the text, but my previous apply assumed that you wanted to create a wireless network.....without Internet access...... using an Apple device, like an AirPort Express.
It's simple....just "create a wireless network with a name and password of your choice. You will be notified of an "error" that you do not have an Internet connection. Simply click to "ignore" that error you will have a green light on the AirPort.
If the Apple guys told you that this is not possible, then they are simply wrong.
Devices will be able to connect to the wireless network and print to the printer....assuming that it is AirPrint compatible model.
My guess would be that the printer that you already have is not an AirPrint compatible model. In that case, the Apple store guys were partially correct. But, there are Apps that you can install on the iPhone and iPad that will allow printing to most printers, even if they are not AirPrint compatible.
If you have a question about how to configure an AirPort Express or AirPort Extreme to create a wireless network.....without an Internet connection.....we can probably help.
Maybe you are looking for
-
Very strange problem with wikipedia on my Macbook Pro 15"
I have a Macbook Pro that I bought in June 2010, 2.66 GHz Intel Core i7 4 GB memory, Snow Leopard OSX (of which all may not be relevent) but recently I've been having possibly the WEIRDEST issue with wikipedia. I just go to the site, and a split sec
-
Urgent ! Help in linking Work center to goods movement
hello, i need help in finding the work center for the goods movement in AUFM. The goods movement AUFM table shows all the goods movement entries but i want to tag it to the corresponding work center. i found out a way to tag it. by linking AFKO - RE
-
10.2.1.192​5
Hi All: I Upgraded my Verizon Q10 to the leaked 10.2.1.1925, the process went smoothly. However, there was no wireless connection after the reboot, so I went and turned on the wireless connection manually, which gave me Internet service, but still no
-
Removing Adobe Acrobat reader 5.0, and installing newer 7.0.9 version
My IMAC with Panther 10.3.9 has Acrobat reader 5.0. This appears in Finder>Applications>Adobe Acrobat reader 5.0 folder. I find that the lastest version of the reader for my system is 7.0.9, per Adobe's website in the reader download section. I downl
-
Hi experts, In TCode, VL31N, at the item table control, I want to add a new column. How do I go about it. Is it modifying the SAP standard or can I enhance the table control to add my own data. Warm Regards, Abdullah