HT204406 in the step 3 itunes close unespected, i use last version of itunes, win 7 at home (no proxy), any idea?
hello, i'm traing itunes match with my pc and win7. when i arrived to 3th step itunes close unepsected without any message.
can you help me?
You would get better response from the iTunes community forum.
Have a nice day!
Similar Messages
-
TS1424 The search for itunes wont work..... any ideas?
The search for itunes will not work...I can put the name in but when I click on the search symbol it will not work?
If you want to simply do a 'fresh' install (versus wiping out all of your data and doing a 'clean' install) simply boot to your Recovery partition (hold down the Command and R keys whilst booting) and when the Recovery screen appears, elect to freshly install OS X.
Don't know that will solve your problem, though... did you do the 'automatic' update or download the update as a disk image (.dmg)? I wouldn't think that would be causing your problems...
Clinton -
Can't get my address book to sync to IPAD2. Using Outlook Express 2004. I followed the steps in Itunes, but still not contacts. Any suggestions?
Mine is doing the exact same thing, and nobody on any of these threads has had any luck fixing it yet, so far as I can tell. iSync is worthless since it simply won't see the ipod and basically is not used at all now as .mac is done through its own preference window. What did work for me, and was quite easily done, was to just open your ipod through the finder and delete the vcard data in the contacts folder. Export your contacts from address book as a vcard to that contacts folder on your ipod, and it all works fine.
Still won't sync...but at least this only takes a minute to do. I'd like to actually fix it though. -
I am receiving the error code (-50) when trying to access the itunes store. The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system (same PC) and have copied the folder across. Has the switch from 32 to 64 bit caused the problem? Is this why I get the error code? I can, however, access the itunes store to view my account. Any ideas please?
Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
What r the steps that involve while v r using DBCONNECT AND UDCONNEC
Hi All,
What r the steps that involve while v r using DBCONNECT AND UDCONNECT AND IN WHICH DIFFERENT SCENARIOS V USE THEM.
REGARDS
KKHi,
To Configure UD Connect on the J2EE Server for JDBC Access to External Databases;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
To create Driver on JDBC side
http://help.sap.com/saphelp_nw70/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
Configuring the BI Java Connectors
http://help.sap.com/saphelp_nw70/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm
Then to extract data use this...
Before you can transfer data from UD Connect sources into BI, you have to generate the metadata (the information about the source object and source object elements) in BI, in the form of a DataSource with a function module for extraction.
If your dataflow is modeled with objects based on the old concept (InfoSource 3.x, transfer rules 3.x, update rules 3.x), you can generate a DataSource 3.x for transferring data into BI from a database source system.
Prerequisites
You have modeled the InfoObjects that you want to use in the InfoSource and the data target or InfoProvider according to the UD Connect source object elements.
Note the following background information:
Using InfoObjects with UD Connect
Data Types and Their Conversion
Using the SAP Namespace for Generated Objects
Procedure
You are in the Modeling InfoSource tree of the Administrator Workbench. First create in InfoSource and activate the communication structure. Then generate the generic DataSource using the wizard in the InfoSource maintenance.
1. Choose InfoSources ® Your Application Component ® Context Menu (right mouse click) ® Create InfoSource.
2. Select the type of the InfoSource.
3. Under InfoSource, enter the technical name of the InfoSource, and assign a description and choose Continue.
The system creates an InfoSource and shows it in the InfoSource tree under your application components.
4. In the context menu of the InfoSource, choose Change .
The communication structure maintenance screen appears.
5. Using the previously modeled InfoObjects, create the communication structure (see Communication Structure).
6. Save and activate your communication structure
7. In the dialog box that follows you will be asked whether you wish to activate the dependent transfer program. Choose No.
8. In the InfoSource menu, choose Extras ® Create BW DataSource with UD Connect.
You get to the dialog box where you can assign a UD Connect source object to a DataSource and then generate the DataSource with the extractor. The fields for the DataSource are already being displayed in the table on the left side of the screen. The fields have the same name as the InfoObjects that you have used in the InfoSource.
9. Select the RFC Destination for the J2EE Engine.
Make sure that the local server is running. If the local server is running and you cannot open the table for RFC destinations, start the local server again.
10. Choose the UD Connect Source in which the data that you wish to access is located.
All available sources that are connected to the J2EE Engine are provided for selection in the input help. n instances are available per adapter.
11. Select the UD Connect Source Object.
All available source objects that are available in the selected UD Connect source are provided for selection in the input help. Source objects can be multi-dimensional storage or relational objects.
The system generates the name of the DataSource in the namespace 6B.
The DataSource is then replicated in BI.
The myself system is assigned to the InfoSource as source system as well as the DataSource.
The system generates a proposal for the transfer rules.
Since the DDIC structure and the function module are located in the SAP namespace, the following entries can be requested during generation:
Developer and object key or
Developer key or
Object key and
Transport request
If you do not make the requested entries, the generated infrastructure is not usable.
14. Change or complete the transfer rules as needed. For example, if a source object element is not assigned to a unit InfoObject, you can determine a constant for the unit, such as EUR for 0LOC_CURRCY (local currency).
15. Save and activate your transfer rules.
Recognizing Manual Entries
You can enter and change the RFC Destination, UD Connect Source and UD Connect Source Object manually. In order to validate these entries and the ones that depend on them, choose Recognize Manual Entries. For example, if you change the selected RFC destination, all of the field contents (US Connect Source, UD Connect Source Object, list of the source object elements) are invalid. If you choose Recognize Manual Entries, the dependent field contents are initialized and have to be maintained again.
Result
You have created the InfoSource and DataSource for data transfer with UD Connect. In the DataSource overview for the myself system, you can display the DataSource under the application components Non-Assigned Nodes.
When modeling InfoObjects in BI, note that the InfoObjects have to correspond to the source object elements with regard to the type description and length description. For more information about data type compatibility, see Data Types and Their Conversion.
The following restrictions apply when using InfoObjects:
Alpha conversion is not supported
The use of conversion routines is not supported
Upper and lower case must be enabled
These InfoObject settings are checked when they are generated.
Based on the large number of possible UD Connect sources, the most diverse data types are possible in the output system. For this reason, a compatibility check is made at the time of generation of the UD Connect DataSource that is based on the type information supplied by the source systems. This attempts to decrease the probability of errors during the extraction process.
(Refernce:SAP Notes)
Hope this helps,
regards
CSM Reddy -
Every time I try to downlaod update to itunes. I receive an error message. any ideas? I want to update my iphone 4 and each time it requires the installation of newest itunes version?
i am having the same problem, my error message is that basically it (connection) has timed out! i have tried all day to get it to go thur
-
Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?
Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy -
My Apple TV and IPad drop after x mintues from "Home Sharing". To restart it, I need to close iTunes on my Windows 7 PC, open it , then I can listen again X minutes (15-90 minutes) to my music via "Home Sharing". Any idea why? What worked for you?
I believe if you updated your Apple TV, you need iTunes 11 to make it work.
-
When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?
Thank you, Vincent! It's still down for me, but at least I know someone had the same issue. Hoping it's going to work over here soon
Best! -
I've tried to update the latest version however I've been without a phone for a day as it seems to be stuck on an iTunes logo. I've tried updating via iTunes inc updating latest version but my phone still won't reset. Any ideas? Please help
See Here > http://support.apple.com/kb/HT1808
If using Windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
EMPJ wrote:
Spends 3 hours downloading latest software then says unable to restore
If the issue persists, take the Device to any Apple Store for evaluation. Be sure to make an appointment first. -
Got this iphone from my Ghananian friend.He forgot the email and password used to active the 4s iphone currently running on iOS 7.He did a restore using iTunes and now needs to be activated.Any idea?
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
There is No workaround. -
Update to latest iOS. Keep getting pop up message to "Connect to iTunes to use Push Notifications". This message will not go away. Any ideas on how to fix?
Hi
I have the same Problem at my I phone 4s , its killing me all application not working .
now WE NEED HELP ,,,,i could not even know how to connect to I TUNES
Thanks -
i have just purchased a new ipod classic about a week ago and it wont play certain songs/albums and stops them halfway through the track. if you fast forward past the spot it plays and it plays perfectly on itunes and on my old i[od. any ideas?? HELP
Since the iPod is only a week old, I would consider returning it to Apple or wherever you purchased it from and showing them what is happening. If they decide that the unit is faulty, they'll swap it out for you at no cost.
B-rock -
I have had two movie rentals, stop in the middle of downloading tonight, both giving me the error message "(err = 50)" -- It looks like its a network connectivity message, but I'm connected. Any idea on what could be causing this? I cannot find info anywhere!
Thanks for any helpIf you have anti virus software installed, disable that.
Try turning off the Firewall in System Preferences > Security
iTunes: Advanced iTunes Store troubleshooting
It would help when you post to tell us which Mac OS X you have installed. Thank you !! -
iphone2 been unlocked not by network supplier and now cannot be restored and says is on error. iphon says conect to itunes and again error like magic circle;)) any ideas?
Sounds like that phone was unlocked by hacking or jailbreaking , maybe the reason why you are unable to restore your phone.
what does the error message say.
Maybe you are looking for
-
Default File Name in Description of the DIR,
Hello Sap Gurus, We are having automatic DIR creation from notification screen, DIR creation takes place automatically. The requirement is when the DIR is created automatically the File name should be defaulted to the description of the DIR, This is
-
Sub Contracting PO- Table and Fields for Materials sent
Dear Friends, I am preparing a functional spec for the sub contracting PO. Can you pls provide information about the tables and fields from where the data about the materials to be sent to subcontractor are picked? Its picking from the structure MDPM
-
How do I get my exfat formatted external drive indexed by spotlight?
Well I own a macbook pro and a Toshiba external drive that orginally came with Texura NTFS software so it could work with Mac. But I decided to format it from NTFS to exfat since I ended up losing the Texura program when I formated my macbook hardriv
-
Display WBS user defined fields
Hi Experts, I want to add one more user defined field in WBS detail screen. Previously my WBS detail screen has 3 user fields displayed already. So I choose "Ufield 4 WBS element" (PRPS-USR03) in OPUK and set it as Input. And then I set the name for
-
I am trying to upload a share a video with adobe revel, however I get an unknown error message at the start of the export. Has anyone got a work around?