HT204406 on ios 6.0 iphone4: Now the device was lost to download individual tracks selectively and completely lost the ability to delete individual tracks and albums from the device. its so BAD (((
on ios 6.0 iphone4:
Now the device was lost to download individual tracks selectively and completely lost the ability to delete individual tracks and albums from the device.
its so BAD (((
It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.
Similar Messages
-
How do i get albums from the iTunes store that i accidentally deleted from my library
i accidentally deleted all of my albums from the offspring that i bought on iTunes, how do i get them back without having to buy them again?
If you live in a Region that allows re-downloading Music...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519 -
i have ios 4.2.1 on my iphone4, now i want to udate it to 6.1.3 .is it possible? if yes then how?
and i don't want to update on ios 7 or later
pleaase help meNo you can't. It is iOS 7 or not at all. You need to update to the lastest software or not at all, so the choice is yours. Update to the latest software or not at all. Stick with what you have.
Also stop trolling this forum with the same stupid question to which you have had the same answer time and again. -
I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
How can I fix this error ?I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you. -
How do you delete albums from the music app in iOS 7?
How do you delete albums from the music app in iOS 7?
You use to be able to in the last IOS and it was a nice feature and now it's gone. iOS7 ruined the Music App!
-
HT1414 why wont iphone4 download ios6 without saying the software was corrupted during download
why wont iphone4 download ios6 without saying the software was corrupted during download what do i do n how do i resolve this i jus need an update as it is on ios4 still and *****
im having the same problem. i talked to a friend of mine who is basically a genuis and he said it probably is Apple's server...that so many people are updating and its causing this. i havent found a true answer yet, i tried to call apple support, but that was hopeless. i thought maybe restoring my phone or something, but i dont want to do that and then realize that if i waited til tomorrow or so that i didnt have to. but im stuck just like you guys!
-
# Question
firefox installed automatically the latest version. Now my google browser, history etc. doesn't work anymore. It doesn't respond. I can't run searches from the browser. youtube button is missing. I've tried opening firefox in safe mode but that doesn't workA possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
What happens if you open Firefox in Save mode?
*https://support.mozilla.com/kb/Safe+Mode
*Help > Restart with Add-ons Disabled -
My gamecenter id and password is hacked, and now they are using it to play my game. I already change my password, help me to get it back from the hacker, thanks
If you have already reset your Apple ID/GameCenter Password, then they no longer have access to your GameCenter account.
If they are still somehow still using your game, then contact the app developer. -
Cannot Update to IOS 5 - Error Message : The Software for the iPhone was corrupted during download.
Everytime i connect to itunes and try to update the IOS to IOS 5,
Get pop up box after agreeing to terms and conditions stating the below,
The Software for the iPhone was corrupted during download.
Disconnect and reconnect, then try again. Make sure your network settings are correct and your connection is active, or try again later.
What could be the problem here?
Additional Info:
OS: Windows XP
Connected to Internet at Work through VPN
Itunes 10.5 installed
Latest IOS up to IOS 5 installed
IPhone synced and backed up
Tried reconnect/restart pc, but no change
Also, cannot download direct ipsw file as site blocked from work vpn
I have updated IPhone IOS previously from the current VPN/Work environment
Please help someone?I am on Mac but have a slow connection (its called 'Narrowband') and have had the same message twice. It downloaded Safari 5.1.1 to my macbookpro but I hate it (no back button and keeps on crashing) - I'm on Snow Leopard - the initial message is that it will take 10 hours to download. I may try at work where they have a faster connection.
However, is there another way to download the Iphone update (and Ipad2)?
pft44 -
I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
"The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
Any advice very much appreciated.
Thank you
UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to
update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I upgraded MacbookPro 2009 from 10.6.8 to Yosemite 2 weeks ago. My iphoto is now a nightmare. i went to our local apple retailer but they could not help either. Perhaps someone can help. Beforehand the OS upgrade I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU with 50GB. I also deleted half of my photos from the default library on my laptop, lets call it DE, now with about 20GB, to gain space. I then upgraded to Yosemite.
I have also installed since a long time Iphoto Library Manager 3.8.6. (this may be the cause of the problem as it was not upgraded and perhaps thus not compatible with iphoto 9.6 which I have now after the upgrade to Yosemite) It all worked fine before the upgrade, switching in iphoto between the two libraries DE and BU.
It also worked fine after the upgrade for a few days. At one stage Iphoto asked me to upgrade the iphoto version as it otherwise could not read the photos when I tried to load the BU library into iphoto. I did click yes to upgrade iphoto. As a result I became a brand new but totally empty library, no photos.
BU was still on the external disc, however the "Master" file was empty. We fortunately discovered all photos were in another file called Old Master, also under BU. We made another copy of the Old Master file onto the external disc. Lucky we did, because shortly afterwards we could not open anymore the BU file thus had no access to anything in there. Now I have 17000 photos in a file called Old Master on my external disc and another smaller library DE on my laptop. When I tried to import the photos from Old Master into a new iphoto library it was very messy. All events dates were mixed up, many photos were imported twice. I have no idea whether all my 17000 photos have been imported.
Can anyone suggest what is the most time efficient way? How do I best import my 17000 into a new library ensuring I don't loose any in the process. I do not wish sorting through 17000 photos for a week or so. Shall i also get a new iphoto library version now? Thank you for anything that may work.Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
Can I delete a corrupt message diretly from the In Box in the Mail folder
I received an e-mail that has an .eml attachment. Mail would not download the entire message with the attachment - although it continued trying to download once it started to load in my in box. I deleted this e-mail message from the server. Now Mail seems to be caught in a continuous loop of "Fetching new mail" The only way I can exit the program is to force quit. When I open the program again the same thing happens. When I try to move this partial e-mail to the trash or delete it, bounce it or forward it I get an "opening mailbox and synchronizing with file system" message
or the program freezes. When I try to copy this e-mail to another folder the message is "resuming interrupted append"
Is there a way to delete just a message from any of the in/out boxes?
It seems like all messaged, in/out/sent etc are all compressed together like a stuffit file but there's not way to get in and delete just a particular message. The only other way I have been able to get rid of a partially corrupted file like this is to remove the entire account or in this instance, the accounts in box, move it to another folder on the desktop, reopen Mail and let it rebuild the accounts in box, then copy and paste everything except for the corrupt file into that. There's got to be an easier way!
Any help or suggestions would be greatly appreciated.
Thanks,The problem I have is it will go into the trash, but then I have the same problem deleting it from the trash! Even when it looks like it's deleted and I reboot Mail, the file returns to the same spot or in the original In Box.
The problem, I think, lies in the actual corrupted file that's embedded in the in/out/trash etc file in the main Mail folder. From what I understand, Mac has fixed this problem in 10.4 and one can go and delete that particular message/file. In 10.3 land, they are all hidden. Thanks for brainstorming with me! -
If I have an iPod touch with music on it and I change my pc how do I put my music from the iPod touch to the new pc without losing it on the iPod touch? My knowledge on iTunes is very limited so simple answers please. :-)
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
-
BW 7.0 Automatic Deletion of Similar/Identical Requests from the InfoCube
Hi experts,
In BW 3.5 we have used a feature in a InfoPackage, where you can delete an u201Coldu201D loading, u201CAutomatic Deletion of Similar/Identical Requests from the InfoCubeu201D.
Now we are building a flow in our upgraded system and we can see that this opportunity is available in the InfoPackage to the PSA, when you load data from the source system (ERP) to the BW system but we would like to make this when we load an InfoCube some layers up (see exemple below; InfoCube2)
Source System -> PSA -> InfoCube1 -> InfoCube2
Anyone know if it is possible or if there is anything else you can do?
Regards,
Kerstinin bi7 the load to the datatarget is done using dtp. the infopackage goes only to the psa. in order to achieve the same you need to use the process step in the process chain. you need of course to create a correct variant, but here you'll have the same options as you had before in the earlier version.
M. -
I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I have the product code with me. I am a Mac user and I don't have cd drive in my computer and I am indeed to get this product activated now. How can I install this without cd drive? Anyone please help me with this issue?
You may download the product from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Maybe you are looking for
-
Trying to installe and reinstall Itunes on my PC Windows 7
Hey Have problems with Itunes, it keeps popping up with a message saying: "An unknow error occured (-42032)" Just tried to go thru the whole charade with uninstalling all the Itunes programmes according to a search: In your program list, locate the (
-
Node.length not updating after removeInstance
I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some d
-
I was cleaning my imac today and noticed a significant amount if dust accumulated at the air vents on the back. I vacuumed these out, but Im wondering if it is ever necessary to open the machine and clean out the dust. Is there a filter of some sort
-
Hi I want to invoke a method on a remote server using RMI. The method has to make use of data in an XML file. Hence I have to pass it to the method... Is this possible in RMI, if so can anyone throw some more light on it....
-
How do you download different Brushes for Photoshop CS6?