HT204406 What will happen if my computer shuts down during the initial setup of iTunes Match?

What will have if my computer shuts down or restarts during the initial start of iTunes Match?

Video: Nvidia Geforce 9600M GT
If you have a recent nVidia driver installed, you might want to check to see if you have either of these two modules loaded - check in the nVidia console:
PhysX, or 3D Stereovision. If you have them, definitely disable 3D Stereo, and test. If no improvement, disble PhysX and test.
Also, try adjusting your Hardware Acceleration. If Max, set to Min and test. If Min, set to Max and test. If either helps, try incrementing up, or down, until it no longer helps.
Last, check your OpenGL settings. If ON, turn OFF. If OFF, turn ON.
It appears that you have a laptop. Is that correct?
Good luck,
Hunt

Similar Messages

I rent my movie but my computer shut down during the download and I cant see my movie !?

i rent my movie but my computer shut down during the download and I cant see my movie !?

Re-download a rented movie after a factory restore?
This is archived so I hope this helps.

My computer shuts down in the middle of installing iTunes 6

Hi all,
I've just upgraded my 3rd gen ipod to the video model. I've been using iTunes 4 for two years now with no problems. Since I now want to be to include photos and videos I had to upgrade to iTunes 6. I start to install this programme and all is fine until it gets to 'removing installations’ in the installation process and the computer just shuts down, no warning, nothing.
I apologise if this topic has already been addressed but I really need some help!
by the way, I'm using Window XP
Thank you all for your time,
Steve

hi Steve!
are you getting a blue screen? if so what text and error message codes are you getting? here's a reference for some of the more common ones:
http://kadaitcha.cx/stop_err.html
if you're not getting one, lets see if this technique will show up a hidden one:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
keep us posted.
love, b

Whole computer shutting down during encoding sequence

this is a new problem for me - It used to work perfect until 1 week ago. now everytime I am trying to encode a sequence into a MP4 the whole computer shuts down during the process - at different % of the encoding why?

And a few other shutdown message threads that may help
Read Bill Hunt on BSOD shutdowns http://forums.adobe.com/thread/772169
-win32k.sys BSOD http://forums.adobe.com/thread/1404938?tstart=0
-and an Encore fix http://forums.adobe.com/thread/1060443

I can only start my iBookG4 after deleting preferences. I have to go into single user mode to do so. If I don't go into single user mode, the computer shuts down during boot up. What might be the problem?

I can only start my iBookG4 after deleting preferences. I have to go into single user mode to do so. If I don't go into single user mode, the computer shuts down during boot up. What might be the problem? How can I fix this?

I do not have a startup disk. I did try fsck (based on what I learned from your reply-thank you). This failed (fsck); here is the message:
** Checking catalog file.
Invalid key length
(4, 8198)
** Volume check failed.
/dev/rdisk03 (hfs) EXITED WITH SIGNAL 8.
I am sure this is an easy fix; I just have no clue how.

My computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?

my computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

My computer shut down in the middle of syncing in now my ipod is frozen. it won't turn on or off

my computer shut down in the middle of syncing and now my i pod is frozen. it won't turn on or off

See Here for,
Frozen or unresponsive iPod touch
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If none of the above works, you may need to do this
http://support.apple.com/kb/HT1808

My ipad i have been restore it yesterday my computer shut down in the middel now my ipad2 stuck in recovery mode and cant be detect by itunes ?

my ipad i have been restore it yesterday my computer shut down in the middel now my ipad2 stuck in recovery mode and cant be detect by itunes and it is jaikbroken ?

Try these steps. If it doesn't work the first time, try a second time.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off. (If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.)
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on. (Note: If you see the screen that shows you are out of battery, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.)
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button
If necessary, open iTunes. You should see the following "recovery mode" alert: "iTunes has detected an iPhone in recovery mode..."
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. http://support.apple.com/kb/TS1538
Hope this helps!
~Joe

HT4796 If my PC shuts down during the migration and I restart the assistant, do I have to do anything with my iMac?

If my PC shuts down during the migration and I restart the assistant, do I have to do anything with my iMac?

Check the user accounts via System Prefereces > Users & Groups.
The migration creates a new user account each time it runs, so depending on what it was doing/had done, it might leave a partial user account.

HT201303 what will happen to my apple id after 5 time using it on iTunes on PC?

I have installted windows and formatted the drive ( disk c ) 4 times and my apple ID in the PC when I authorized it said you authorize 5 out of 5 times. I never used it on another computer but now what should i do? I did not know that I shoud deauthorize it befor formatting. so what will happen to my apple ID. please help me and give me more shots or find me a solution.thanks a lot.

If you've reached five authorizations for that account, there will be a button in your iTunes Store account information that will allow you to deauthorize all systems associated with that account. Log into your Store account and you should see it. You can then reauthorize the computer(s) you're using now.
For the future, it's best to deauthorize your system before reformatting the drive and reinstalling. That will help prevent a single computer from using up multiple authorizations.
Regards.

My computer shuts down but the restart feature will not work. It just hangs.

Hello
I have a MS6547 version 1 (645 Ultra Motherboard)
The problem I am having is that my computer will not restart. If I press the power off button in windows it will shut down but the restart windows function will not work it just hangs at (Windows is shutting down)
I zero'd my hard drive and installed a fresh copy of windows but the restart feature still doesn't work. Even when I was in the middle of installing windows when the computer says it will reboot in 15 second that hangs on restarting computer as well/
Hope someone can help
My spec is
645 Ultra Motherboard
2.2gb Pentium CPU
256ddr2100 RAM
ATI Radion Graphics Card
60gb Hard Drive
LG CDRW
Please Help.

Hello and welcome!
It sounds like it has a hard ware reason. I suggest you take the motherboard out, to see that there are no stand-offs/spacers/distanser left unused creating a short.
Also, remember to have as little hardware as possible when you install Windows. No extra PCI-cards, USB-devices and such.
If the system has worked well earlier, above still rules, but here are some many other reasons for the described symtoms:
http://www.aumha.org/win5/a/shtdwnxp.php

What will happen to ongoing transaction in RAC if the node fails?

In my RAC setup with three nodes .....if there are few transactions going on one node and the same node fails what will happen to those ongoing transactions........i mean will they be rollback....or what?????????
Thanx in advance
Gagan

this is an sqlplus feature. If you do not useSQLPLUS, but something like toad or any other client,
it will not work.
But, it gonna work with middleware softwares.well, if sqlplus could do it, another software could do the same. The trick is, you must reexecute the same select and be sure to get the rows in the same order !!!
If you do a fetch, this is ok, there is well a "select cursor" failover, but for a "bulk select", you should restart your query.
>
well, the transaction will be rollback and you willlose contact if you use sqlplus
Not necessarly, if you configured load balance, then,
you wont loose the connection.Will not you? I must try it one day, I just removed RAC from my notebook last week because of the lack of disk space...
>
the select actually reexecutes on the other node insqlplus, but you only "see" the lines comming after
the current ones (but the whole select is
reexecuted)
Exactly, but, user wont realizes this.apart from the time he will have to wait, which can be quite long if the query already returned 90% of the rows...
>
Go through the link which I have provided in my
earlier reply for more understanding on type of
failover and load balance.well, quite unclear actually :
Therefore, with Transparent Application Failover, a client notices no connection loss as long as one instance remains active to serve the application... there is no "connection loss", which does not mean there is no "loss" !
http://download-west.oracle.com/docs/cd/B10501_01/network.920/a96580/advcfg.htm
Active Transactions
Any active transactions are rolled back at the time of failure because TAF cannot preserve active transactions after failover. The application instead receives an error message until a ROLLBACK is submitted.
which means, your application must manually resent the transaction or whatever is appropriate

What will happen if I delete a photo from the library that is in a iPhoto Book?

What will happen if I delete photos from my iPhoto library that are in an iPhoto book? Will the book stay intact?

no - it will be deleted from the book too - books are like special albums that point to the library photos
LN

Computer shuts down during startup

Hey everyone,
it shames me a little to ask for help about computers because I am usually ok with doing this stuff myself.
This time, however, I cannot seem to fix the problem indefinitely.I need a laptop for school and cannot afford another so any help would be greatly appreciated!:
I will just point the facts out:
After a few years use (two) it now shuts down during (windows) startup.
I ended up cleaning the Heatsink/fan yet the problem persisted.
The model is a Toshiba Satellite A200-PSAF6A.
I am no longer under warranty.
The school techs cannot help me.
A few oddities that I noticed:
It starts up fine when the power plug isn't plugged in.
It starts up fine with the power plugged in only in safe mode.
Using CCleaner and Defraggler temporarily fixed my problem (for about 5 minutes or so).
I hope that you guys can help me. It's just annoying that I cannot fix this myself..
If any further information is required please just ask and I will reply with as much haste as I can under my current circumstances.
Thanks,
Norak.

Linton wrote:
I have a couple of years old A200 satellite and have the same problem.
During a "cold start" I may get up to the windows login screen and then it shuts down and restarts. (sometimes it doesn't make it to the windows screen and turns off to restart). Then it will start to load windows and the little bar at the bottom will be loading windows and then freeze. I would have to hold the power button down to turn off and restart. Then I start windows normally and it usually works OK, sometimes I have to do this step again, but eventually I get into windows. Then if I shut down and restart it starts up fine, unless I wait for it to cool down.
Since this started happening, I have reinstalled vista 32bit to out of the box condition and updated to the latest bios, to no avail.
Computer has always run hot since new, seems to have very poor cooling. But the fan operates, most of the time on full boar.
Do you think this is a software issue or a component issue, or cold joint.
BTW it will not shutdown at all if I keep the computer in the F12 key settings area,im not sure what this place is called, but you choose to boot from cd here.
Okay, this is weird and I'm not sure if this has anything to do with what I had mentioned earlier. I was having some issues with my DVD drive, it was rattling bad and the spin off time was off causing coasters on almost every blank DVD, so I had the thing sent in for a replacement. They put in a new DVD drive, checked the status of my BIOS (V 4.2 which I had all along) and returned the unit back to me sometime around April 22, 2010 -- ever since the thing was working fine. I'm not sure if the bad drive had caused the unit to work erratically.
Before it was sent in, the issue was of course with the DVD drive, the startup then shutdown problems, plus a whole plethora of other small problems which I didn't bother to mention on my first post. For instance; the illumination lights that controls the media -- sometimes they would not turn off when I shut my computer down. The light stays on even after the computer powers off and I'd have to unplug the AC power cord for the lights to completely shut off.
My initial problems with the laptop was:
Media lights won't go off,
DVD drive rattles very loudly and burns bad media,
Shutdowns during startups,
The screen housing would creak every time when I wanted to adjust the position (this happens when I adjust it slowly).
After they replaced the DVD drive, everything seems to work fine. It's been almost two months now and I haven't had issues with any of the above mentioned problems.
Satellite P305-S8997E | Windows7 Pro 64-bit | Intel Centrino Core 2 Duo T8100 2.16GHZ | 4GB DDR2 RAM | 320GB 5400RPM
Dell XPS 17 | corei7 andy Bridge | 8G DDR3 | 1TB x7200 | BD-RE | 1080P

Computer shuts down during render/prerender

This was not my original problem but it has occured before and I know it will occur again.
My computer shuts down for no reason when I try to render or prerender video in Adobe Premiere Pro CS4. From what I can tell it is a general issue with premiere that I am having. I have tried multiple video formats, multiple video lengths, and multiple rendering options and I am still getting random shut downs during rendering.
Here are some specs for my computer which is a laptop:
OS: Windows 7 Ultimate (64 bit OS)
Proccessor: Intel Core 2 Duo @ 3.0 ghz
Ram: 8 gigs of it
Video: Nvidia Geforce 9600M GT
1 Hard Drive w/ 280 gb of space
As a recap.... My exact problem is that during the rendering or pre rendering proccess my computer simply shuts down as in it turns off.
I can also add that the computer does act strangely leading me to believe that theres some hardware or software incompatibility. While it is rendering I can hear the CPU fan pick up which is usually normal for any rendering application but what I noticed was that it doesnt stop speeding up. Its like if it was going into an overload and I can confirm that at its peak, the computer shuts down.
To add troubles... whenever I pre render any video and it succesfully renders.... Premeire will hang up really really bad if I try to play the pre rendered preview. In otherwords when you preview a video that it pre rendered it usually plays smooth and everything is fine. After I pre render something though and play it I can tell its locking up because the timeline bar is really jumpy and the video playback skips also.
This is the problem I would really love fixed. I usually have to button smash my keyboard until I lock premiere up and then once it unfreezes itself i can preview my work smoothly. This is however like a good 5 mins of my time trying to get the preview to play smoothly though so its really hurting how fast I can work.
If anyone can help me out I would greatly appreciate it. I will be trying to run the same stuff on my older laptop and observe the results. I personally think CS4 is incompatible with windows 7.

Video: Nvidia Geforce 9600M GT
If you have a recent nVidia driver installed, you might want to check to see if you have either of these two modules loaded - check in the nVidia console:
PhysX, or 3D Stereovision. If you have them, definitely disable 3D Stereo, and test. If no improvement, disble PhysX and test.
Also, try adjusting your Hardware Acceleration. If Max, set to Min and test. If Min, set to Max and test. If either helps, try incrementing up, or down, until it no longer helps.
Last, check your OpenGL settings. If ON, turn OFF. If OFF, turn ON.
It appears that you have a laptop. Is that correct?
Good luck,
Hunt

HT204406 What will happen if my computer shuts down during the initial setup of iTunes Match?

Similar Messages

Maybe you are looking for