HT204407 Friend not showing up on Find Friends despite all the settings being correct??

All their settings are correct and on yet they are not showing up on my find friend app. I am on theirs though....from both my iPad and iPhone!

- Restore from backup. See:                                 
  iOS: How to back up

Similar Messages

  • My iPad will not send emails, even though all the settings seem correct.  But it receives them OK.

    My iPad will not send emails, even though all the settings seem correct.

    Patricia,
    When you say seem correct, have you checked in Settings > Mail, Contacts, Calendars > Account name > Outgoing Mail Server, SMTP and the outgoing server name is correct, then > Primary Server name is correct >  Host Name, User Name, redo the Password, Use SSL is OFF or ON according to your provider, may just try it both ways, Server Port, often 25 is the best to use.

  • My ATV is not displaying on my TV.  My network is working, my software is up to date, ATV turns on and the white light does not flash.  I have recycled all my equipment and it is still not responding.  All the settings are correct as well.  I am puzzled.

    My ATV is suddenly not displaying on my TV.  My network and Internet connections are all working, my software is up to date, the ATV white light is on steadily, all my settings are correct and I have power cycled all my equipment.  Is there something more I can do, or is it possible my ATV needs repair?

    it might
    for my appletv to display on my tv I have to choose the hdmi port i have connected to as input source
    I do that using my tv remote
    how depend on the tv
    before taking it back you should also test with another hdmi port and another tv (friend of family) to verify that it is indeed broken

  • Downloading TV shows from itunes - episodes appearing seperately not all under the same series despite all the information being the same.  How can I get them to appear under the same series

    Just that
    I have many series - NCIS, West Wing etc where some episodes appear under the series and some appear on their own.
    I have checked the info anf they appear to be identical.
    How do I get them to group together corectly?

    After a couple of days, I'm noticing that the repeat(ing) offenders have more than 10 episodes, and seem to keep repeating them every time I sync.
    They only show once in my phone and in the iTunes Podcasts, but through iTunes and looking at what's in my phone is when I see the repeats.
    Even after I've marked a podcast as played, and deleted it from within my phone, as well as telling iTunes to delete the played episodes, it still shows multiples of the played episodes.
    There doesn't seem to be any rhyme or reason to it either. They aren't the newest ones either.

  • My safari does not keep my history despite all the settings and adjustment i made to the safari preferences so as to be able to keep my browsing history. the browsing history is wiped out whenever i close safari.

    i use macbook pro mid 2012, OS X mavericks. my safari does not keep my history desp[ite all the adjustments made to the settings at safari preferences. my browsing history are cleared whenever i exit safari. i dont know why. i want to try and re - in stall it . the safari is version 7.0.1. but i dont know how.

    If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • When I send an email and BBc to myself/ the BBC does not show. It uses to do all the tyears before, but we change web hosting to another company. The reason fof BCC is that I work from outside the office and want to let know what I have replied to en

    We recently changed our webhosting company and i work and answer emails from another location than main office. I worked with Mail
    So it is important that on the main office they can read my reply to customers. That is why I always send a BCC to myself (main account)
    After the change my cc and BCC are not send. What can be the reason?? Before it worked perfectly.
    Can somebody help me out of have same experience
    thanks in advance
    Hans

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

  • TS2446 I have been through all of the settings & done what was indicated however, my Apple ID that shows on my iphone when I want to update my apps is incorrect even though all the settings are correct in Settings/Store. Now what can I do???

    The Apple ID on my iPhone is incorrect when trying to update apps.  It is correct in my Settings.  I have signed out & signed back on & this does not make any difference.  I have also changed my password and that doesn't help.  HOW can I correct the incorrect Apple ID that only shows when I try to update apps?? I would appreciate help!  THANKS!

    Even if you put a credit or debit card on file with iTunes it will still use your balance FIRST.
    I would suggest putting a card on file and testing to see if it will allow you to make a purchase, then removing the card from the account after successful download of an item.
    EE

  • Bleeds wont show up on pdf (and i'm pretty sure all the settings are correct)

    So i think i've done everything right settings wise. also checked on internet just to be sure i wasnt forgetting anything. But still... no bleeds when i export to pdf
    Can anyone tell me why it wont work?? Tnx!

    In Normal view mode you should see the page trim and the bleed area. An object can extend outside of the trim box. So both of these pages have an 1/8" bleed, but the orange box on the bottom page bleeds but on the top page it doesn't:

  • IPad not showing up in find my iPhone

    Hi,
    I am having a problem with my new iPad. I have an iPhone and iPod which both show up as devices on find my iPhone but when I set up the iPad using the same apple account it failed to show up. I have checked that all the settings are correct. The two orriginal devices were migrated to an iCloud account when the software was updated to ios5.
    This is quite anoying so if anyone has any ideas on how to fix this it would be much appriciated.
    Thanks

    I managed to fix this by following someone elses lead on another thread. It was fixed by going into the Wifi settings and changing the DNS to 8.8.8.8. I then worked fine. Interestingly I then changed the DNS setting back to the original and it still works fine!

  • 1 TB External WD Drive Not Showing Up In Finder/Disk Utility/Terminal

    Hey everyone,
    First time posting here so forgive any mistakes. I recently purchased a Late 2013 Macbook Pro Retina, 15-inch, 2.6 GHz Intel Core i7 from Apple. Previously, I had the late 2007 Macbook Pro model until a friend spilled some water on it and corrupted the motherboard. Regardless, I was using a Western Digital 1 TB external hard-drive to keep all my documents and files backed up, manually, alongside the time machine feature built in. (This was not connected at the time of the spill, and was not thereafter, so rule out water damage) During the period between when the old one died, (earlier this year May-2013), I kept the drive safely in storage because I knew I would want to transfer my 100gb music librairy along with my photos and other files when I finally got the new one later that year (was waiting for the hardwell processors to come out for the MBP). Just recently after this purchase I tried to connect the drive to my new MacBook Pro but it was not showing up. I have scowered the online forums for trouble shooting tips and took all the steps to no avail. I have replaced the data-drive cable with a new one, connected it to the wall outlet in case it wasn't drawing enough power from the laptop, among a few other simple tricks, but still it would not show up in either Disk Utility or the terminal command to show all active drives, all that's there is the internal Macintosh HD one. It was a fairly quiet drive-however I do notice there is not much of a 'spin-up' noise or any sound of it begining to work when turned on or plugged in, so I'm worried there might be something wrong with the drive itself. Nonetheless, the power signal continues to flash but still no recognition from the computer that it's there, so I'm certain it's not reading it. I have tried on my other buddys Mac and it is the same situation, as well as my roommates PC (which I figured wouldnt anyway because of how its formatted, but it was worth a shot) I am not sure which avenue to take next as I have all my files and college work that I still need access to on the drive, and would really hate to have to format the drive or anything drastic as such. Possibly there is a part I can buy and replace myself to make it start up and spin again, but I am not sure what that part could be or if there is an easier solution out there.
    I would greatly appreciate any information or help on this problem, thank you all for the time and advie.

    Clicking from a hard drive is bad.  Does the external drive have an external power supply?  If it does I would use this supply.

  • Windows Vista Computer not showing up in finder

    Hi, my WIndows Vista computer is not showing up in finder under Shared. I can connect to my PC from my mac by clicking on finder, go, connect to server and typing in the PC's IP Address, Username and Password. I can also see my Mac computer from my PC running Windows Vista.
    What's weird is that it was showing up for awhile but I recently changed my network key and unchecked file sharing on both my Mac and PC.
    Afterwards I re-enabled file sharing on both my mac and Vista computer but my PC won't show up in finder.
    I can connect to my PC and see the computer in finder but when I click eject, it disappears. I would like it to remain in finder. Is there some setting that I need to enable? Please help

    Assuming that the missing machine is part of the same Workgroup/Domain:
    Open Terminal and enter "nmblookup -M workgroupname" (without the quotes, and replacing workgroupname with the name of your workgroup or domain.
    This will list the IP address of the machine that is the "master browser" of your network. If you are on a domain, the address should be that of your domain controller. There should only be one ip address listed.
    You can then get that machine to list the shares that it see on the network by entering:
    "smbclient -L ipaddressofmasterbrowser"
    You should be able to just press enter when it asks for a password.
    This will list available shares and servers.
    Regards,
    Rodney

  • External Hard Drive does not show up in Finder

    My external hard drive is not showing up in Finder.
    It shows up in Disc Utility, but I do not have access to it. I have tried the following:
    command-shift c, nothing happens
    confirmed in Preferences/General that external hard drive was checked
    tried another cable
    tried another port on the back of the external drive
    tried to connect through the USB port
    re-started, etc.

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • Windows Shares Not Showing Up In Finder (Master Browser Problem)

    Hi, on leopard I had no problems with Windows shares showing up in finder. However, having upgraded to Snow Leopard, I've now lost that ability.
    Before I had my Leopard computer set as the master browser. I did this by specifying domain master = yes and preferred master = yes in my smb.conf. However despite importing these settings into Snow Leopard's smb.conf, it is not acting as a master browser.
    When I run the command "nmblookup -M -- -" which in Leopard returned my Mac as the master browser, now it says "failed to find name _MSBROWSE_#01".
    I'm sure this is why the Windows PC is not showing up in finder, but I don't know why the smb-conf isn't taking effect in Snow Leopard, and setting it as the master browser?
    Also, I can use Go -> Connect to access my Windows shares, and Mac shares show up in Vista okay.
    Any help appreciated.

    Problem fixed upon updating to 10.6.2.

  • Blank DVD and CD not showing up in Finder or anywhere

    My blank dvd and cd are not showing up in Finder. I checked my preference and deleted from my library com.apple.finder.plist. All to no avail. I have the new upgraded Lion.

    AppleHoop wrote:
    When I open the Disk Utility I see SuperDrive but I can't burn nor eject the disk. The only way I can eject the DVD is to restart my computer.
    Do other blank discs appear normally?
    Do other commercially manufactured discs (software, movies) show up normally?
    Those questions are to help narrow down exactly what the problem is.
    AppleHoop wrote:
    I have no idea what it means to "zap the PRAM" and Reset the SMC"
    Honestly i don't think those are going to make much difference for this problem. Go ahead and do them, but they're usually last resort desparation solutions, not first resort.

  • Blank CD/DVDs not showing up in finder

    Hi,
    When I insert a brand new blank cd or dvd, it does not show up in finder or the desktop, which is how i used to make data dvds and such. however it does write in itunes or idvd, it will write to it and recognize it. any ideas?

    Open up preferences and then go to CDs & DVDs. For the options on "When you insert a blank CD/DVD" choose "Open Finder." This should work for you.

Maybe you are looking for

  • How do I create a track with just controller MIDI data in it?

    How can I create a track with just MIDI controller data in it?  For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it. I can then use this setup as a template for futu

  • How to prevent changes to SOLD TO in sales order

    Hi, Can someone remind how to stop users from changinf the address of the SOLD TO in a sales order? We allow users to change the SHIP TO address but sometimes they select the wrong partner and update the SOLD TO and then the delivery is made to the w

  • How to use program RFBISA00?

    Dear all, We want to update our account descriptions in several languages. In order to do this we need process in mass using RFBISA00 which is standard. But I do not understand how to use it because we only have for only one structure BSKX. This stru

  • New mac user, iPhoto keeps crashing

    Have only had our macbook air about 1 month. We went to a one on one for iphoto yesterday and installed a lot of our old photos on to the mac in iphoto(~5000 pics). When we came home and started doing things with the pics, iphoto keeps crashing. Usua

  • BVI interface IP doesn't respond on AP802

    I have my AP now running... Mostly... And associated clients now get ips from the router dhcp server, But although the docs indicate that you should be able to contact the ap via the BVI ip and use that to run the web intface, i cant get any response