HT204409 wifi on 3gs drop in and out why?

why does my wifi drop in and out on my 3gs ?

Power cycle the Wi-Fi router.
Settings > General > Reset > Reset Network Settings.
Does the issue still occur?
If so, try a restore as new.
If it still continues, you may have a hardware issue. Take it to Apple for evaluation.

Similar Messages

Why does my wifi connection keep dropping in and out?

I have Samsung Galaxy Note 2. The wifi is connected to the wireless router and is the only pc of equipment that is. Full bars. Yet the note keeps dropping the wifi saying it has authenticity errors? My previous cell had absolutely no issues. And its a new router.

I regret to learn of the issues, funeralguy77! Lets figure it out together. Can you try to connect another device to the same WiFi connection. Does it connect? Have you tried to delete/forget the connection and trying again?
Please share additional details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Network coverage drops in and out after upgrading iPhone 4s to ios5.1, Network coverage drops in and out after upgrading iPhone 4s to ios5.1, Network coverage drops in and out after upgrading iPhone 4s to ios5.1

Can anyone please tell me what I can do to fix the following problem....I updated the software to ios 5.1 two days ago and since then my network coverage drops in and out. Very difficult to make recieve calls with this happening every few seconds and near impossible to use the Internet. I have contacted support but got no support as 90 days had just ended. I have researched this problem all over the Internet and am now aware that I am not the only one with this problem after the upgrade. I have reset many times and read every post and still there are no answers...Can anyone please help? I'm trying to run a business and it's impossible with the phone doing this now.

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

Photographer's package - can i drop in and out of membership when required and if so is it only after an initial period has elapsed?

photographer's package - can i drop in and out of membership when required and if so is it only after an initial period has elapsed?

Hi there
The Photography plan is only available as an annual plan (either pay up front or paid monthly) so you'd be signing up for a year.
A month to month plan is available for Creative Cloud complete and single apps which means you don't have to commit for a certain period of time and can stop and start.
Subscription terms available here: https://www.adobe.com/misc/subscription_terms.html
Hope this helps.
Thanks
Bev

Audio dropping in and out on Express

My setup:
- Airpot Express running 6.3 software hardwired into my network gigabit switch. Stereo analog audio output plugged into my home theater system. Airport is setup to "Create a wireless network"
- Airport Extreme 802.11g running 5.5.1 software hardwired into my network gigabit switch. Airport Extreme is setup to "Create a wireless network"
- G4 Laptop with 1GB RAM running Leopard 10.5.8 hardwired into my network gigabit switch. Itunes 9.03 open with shared server mounted (see NAS drive below).
- NAS drive hosting 20GB worth of music (mostly high quality AAC files) that iTunes plays back from hardwired into my network gigabit switch.
My Airport Express was streaming audio fine (using the Remote application on my iPhone) however within the last 4 or 5 months music has been playing back choppy dropping in and out every 5-10 seconds or so for about a half a second. Does not matter what music I am playing. Cannot get iTunes to output audio locally on my laptop (only via Express) so think there is something going on.
I know the Airport Extreme basestation probably has nothing to do with the problem but just wanted to point out the fact that I have configured both the Airport Extreme basestation and Airport express to "Create there own wireless networks". I could never successfully include the Airport Express into the Airport Extreme wireless network so kept them separate. However this should all be a null point as the Airport Extreme is hardwired and should not be using any wireless functionality for streaming the music.
Any thoughts?

an update, switched the G4 laptop out with a G5 tower, keeping the rest of the setup the same, and the music played fine. Switched back to my laptop and the music played choppy. Noticed the CPU was bouncing around quite a bit on the laptop while playing music and that is when the music would cut out. So must be my laptop? Weird as the laptop worked fine for years and that is when it only had 512MB RAM. I did just update the laptop to 10.5 from 10.4 so perhaps 10.5 is the problem?
However I am running Twonhy Media Server on the laptop to stream video from the same server the music is on. I stream it to a PS3 and it streams perfect.
I would seem that iTunes does not efficiently stream music via mounted servers?
Message was edited by: David K Oberlin Jr.

I use a Canon VIXIA HFM41 camera with bluetooth WM-V1 mic and receiver. Audio drops in and out.

Trying to figure out why my audio kept dropping in and out while recording a 90 minute presentation this past weekend.
I just recorded 90 mins today in my office of a TV monitor screen and audio - no audio problems. Batteries were fresh and camera was fully charged over the weekend before I had the audio problems. Bluetooth? Could there have been some sort of cellphone interference with the bluetooth audio signal that caused the problem? I was with a group of about 25 people when recording the event - and I was the only person recording video/audio. My camera was about 15-20 feet from the microphone, which was close to the house mic and sound system - but no interference at all with the audio I did capture.
The audio didn't just drop out - it faded out, and would fade back in after several minutes. Video was complete, no interruption or distortion. HELP!

Yes, you can use the 85 watt adaptor. You cannot use the new adaptors because your computer is not equipped with the proper MagSafe connector. But you can use the older MBP adaptors as well as a 60 watt replacement adaptor. All can be found at Apple's Online Store.

Trouble with audio dropping in and out?

I had this problem for ages.
Apple TV3 was connected to monitor via HDMI. Monitor audio out was connected to hifi system. The audio was dropping in and out. Fix was to go in the monitor settings and set the HDMI audio to 2.0
Hope this helps someone, as I couldn't find this info anywhere on the net.

an update, switched the G4 laptop out with a G5 tower, keeping the rest of the setup the same, and the music played fine. Switched back to my laptop and the music played choppy. Noticed the CPU was bouncing around quite a bit on the laptop while playing music and that is when the music would cut out. So must be my laptop? Weird as the laptop worked fine for years and that is when it only had 512MB RAM. I did just update the laptop to 10.5 from 10.4 so perhaps 10.5 is the problem?
However I am running Twonhy Media Server on the laptop to stream video from the same server the music is on. I stream it to a PS3 and it streams perfect.
I would seem that iTunes does not efficiently stream music via mounted servers?
Message was edited by: David K Oberlin Jr.

Why does my Iphone 4S drop in and out of charging?

Every time I charge my phone it drops in and out of charge. Can someone help me.......

Yes, as paulcb says, it's most likely because coverage inside the building stinks. You're lucky you can get the EDGE signal inside. The last place I worked, AT&T had to come out and place an antenna inside the building. Largely because we threatened to cancel our contract of over 500 phones with them if they didn't fix it.

When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
We also have two iPhones that do use our local wireless network on occassion.
We have stereo speakers that are currently connected into one of the Airport Expresses.
For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express). Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each). So far, here's what we've tried to do:
(1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house. They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely. Spent a couple of hours setting everything up. No dice.
(2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
(3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu). The computer does this at random intervals on a regular basis. The skipping, however, will occur even if the menu is not selected.
(4)     Here's the weirdest part. The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down. In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals. In this situation, the skipping only seems to occur when the menu is selected.
At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it). But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem. I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
Any help would be most appreciated!

Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

Dealing with dropped frames and out of sync audio

Hi!
I'm using Final Cut Studio 3 and I'm trying to record some video from a pretty old MiniDV-camera. The problem is that a have some dropped frames and when I record the whole thing it gets out of sync.
By default Final Cut aborts the capture (without saving) when it finds dropped frames. That won't work for me. I start recording, it records a couple of minutes and then it just aborts without saving anything.
I tried to record the entire tape when using the option of not aborting on dropped frames. I recorded the entire video but not it gets more and more out of sync later and later in the video.
So, do you have any suggestions on how to deal with this? Maybe I can use an external application for this cause I haven't found a way to deal with this in Final cut.
Best
Felix

Hi(Bonjour)!
Did you shoot in DV or HDV ?
Did you try to capture HDV with Apple Intermediate Codec 1080i60 (or 50 for europe)?
Does you downconvert HDV shooted to DV upon capturing from camcorder ?
DV-NTSC 48 kHz is the way to go with downconverted material.
Does your DV audio setting is 16 bit on FX1 ? (HDV is a fixed one).
Michel Boissonneault

TS3406 i have an apple 4s. had no probems until lately when bluetooth capablility and wifi continue to drop off and then come back, then drop off again. verizon guy says, of course, i need a new phone, because by phone can't handle ios7,

iphone 4s, updated to ios7. now dropping bluetooth and wifi all the time. can you help?

Hey whitnep!
I have two articles that I believe will help you troubleshoot these issues with your iPhone:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Take care, and thanks for visiting the Apple Support Communities.
-Braden

TS1398 My new IPad mini has poor wifi reception. Goes in and out. My IPod, IPhone, Ipad1 and Ipad2 work finer. I think it has wifi antenna issues. Does anyone else have this problem?

My new IPad mini has poor wifi reception. It goes in and out. My IPod, Iphone4, Ipad1 and Ipad2 work fine. What can I do? Does anyone else have this problem?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Setting "in" and "out" - why does it export the full timeline ?

Hi folks.
Well, I'm scratching my head.
I go into Premiere, onto the timeline, and set an "in" point and an "out" point. I then get Premiere to render the video. It renders out the whole timeline, eventhough I told it to render only the "work area" which of course one would think would be that area I told Premiere I wanted, because of my "in" and "out" points.
The manual is very vague, and I just don't get it. I don't want to do any razor cuts, I just want to get Premiere to render out the video inside my "in" and "out" points I've inserted.
Any help would be appreciated,
Dave.

The work area bar is different than setting in and out points. It's the bar with the (I think) blue handles at the top of the timeline. Drag those handles to the points where you want rendering to start and stop, and hit Enter.

HT204368 have a blueant Q2 that does not like to stay connected. Have phone in shirt pocket but ear piece drops in and out at will. Blueant says they do not have a proble, has to be Iphone. any ideas at $99.99 plus tax and can't use it, well you figure it

Received new iphone 5 for Christmas. Also Blueant Q2 blue tooth ear piece. Phone works great, blueant, not so. Have had numerous emails and phone calls to tech about dropping out. There is no active phone, you are connected and all I have to do is move my head to have either happen. I keep the phone in my shirt pocket and it can't be over 10-14 inches from one to the other. Any thoughts and suggestions???? At $99.99 plus tax just can;\'t afford to hit it with a hammer.

Didn't really read much at all of your post. Much, much too long, irrelevant details and & no paragraphs.
Can't use time machine due to corruptness
Post over here -> Mac OS X v10.6 - Snow Leopard forum
About my macbook and apple ID how can I upgrade my Macbook from 10.6.3 to 10.6.8 with out all the permissions being changed and corrupt??
Same as above. Post in the correct forum.
Need to gain access to my apple Id that would be a great start
-> http://support.apple.com/kb/HT5625

Audio dropping in and out?

I'm in a Skype group of about 25 people, with calls that usually have between 5-7 people. It is a Cloud-based chat. The audio skips every five seconds and it doesn't matter who is hosting. We've had two hosts based in the US (Seattle and Little Rock), one in Thailand, and one in Norway--all with good Internet connections. It doesn't matter who is hosting the group, the audio is still ridiculously low quality and drops every five seconds. It started doing this Friday night, and it was never an issue before. It does it regardless of whether audio or video is involved, and regardless of whether it's the latest version or an older version.
EDIT: I should also add that people in the chat can always hear the host clearly, it's everyone else that can't hear each other, and the host cannot hear anyone else.

an update, switched the G4 laptop out with a G5 tower, keeping the rest of the setup the same, and the music played fine. Switched back to my laptop and the music played choppy. Noticed the CPU was bouncing around quite a bit on the laptop while playing music and that is when the music would cut out. So must be my laptop? Weird as the laptop worked fine for years and that is when it only had 512MB RAM. I did just update the laptop to 10.5 from 10.4 so perhaps 10.5 is the problem?
However I am running Twonhy Media Server on the laptop to stream video from the same server the music is on. I stream it to a PS3 and it streams perfect.
I would seem that iTunes does not efficiently stream music via mounted servers?
Message was edited by: David K Oberlin Jr.

HT204409 wifi on 3gs drop in and out why?

Similar Messages

Maybe you are looking for