HT204409 wifi will not work after restore

my wifi will not work at all

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:                 
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

  • HT1414 wifi will not work after restore

    wifi will not work after restore

    Se emy response to your other post
    https://discussions.apple.com/thread/4862098?tstart=0

  • My wifi will not work after compurter sleeps

    Wifi works great until computer goes to sleep.  When I turn it back on, it can't connect.  Right now I am restarting the computer everytime.  Very annoying.  This only started this week.  It has worked well since Christmas.  This is an imac bought on Dec. 23 of this year.

    This is a know issue. The work around solution is only letting the display sleep, set the options in System Preferences - Energy Saver - Power. If you don't want to use the work around then simply cycle the Wi-Fi when you wake up the computer. You can do this by click the Wi-Fi symbol in the menu and then choose Turn Wi-Fi Off and then Turn Wi-Fi on.
    BTW PLEASE PLEASE PLEASE fill out your profile. Not having a profile completed makes it difficult for those trying to help you. You can do this by clicking Your Stuff in the upper right of this page, then click Profile and filling in the pertinent information.

  • TS1398 my wifi still not working after restore and make new iphone my wifi still greyed what shall  i do now?

    apple need to do something or answer my question,what i need to do over my wifi doesnt work im so disapointed now because i tried all posible solution for it but still my wifi cant be on still in greyed.pls do something...

    Hello there, Amer.
    The following Knowledge Base article offers up some great basic steps and additional more in-depth steps for troubleshooting the issue you're describing:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
    If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

  • WiFi Not Working After Restore

    The WiFi Is Not Working After I Restored My 1st Gen. iPod Touch
    *PLEASE HELP!*

    luvlabs,
    Thanks for attempting to assist in this. Unfortunately the networks around me are not even being seen by my ipod touch. I of course, to answer the dumb question you asked macpolymer, have my wifi settings turned to on. I will attempt the restore/reset again, but I have done that about 3 or 4 times now, can't recall exactly, with exactly the same result.
    I need to have this resolved, otherwise I am stuck, as I have lost my receipt for Best Buy.

  • After install of ios7 on ipad mini wifi will not work

    I have installed ios7 on my mini. After doin so WiFi will not work.  Button is greyed out.  When I try to erase all content and go back to factory it wants my password and won't do so because it says no internet connection.  Had I know this was going to happen I would have left well enough alone.  I have tried hard resetting by holding home and off button simultaneously but not working.  Anyone have any ideas?  This mini is now basically useless to me without internet.  I'm really annoyed.

    Hello Andy,
    1st guess would be an incompatible extension from the previous OS, 2nd would be a reinstall of the OS is needed, but...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • Iphone 3gs will not activate after restore and update

    my sons iphone 3gs will not activate after restore and ios update.
    phone keeps saying no service but worked fine before restore and update any ideas ? thanks

    Sorry. The jailbreak is undoubtedly the root cause of your problem.
    It is not always possible to repair the damage done by jailbreaking.
    Try searching google for an answer, but be prepared to just buy a new phone.

  • TS1702 Certain apps will not work after ios6 install.

    Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • My aperture library will not open after restoring my whole computer after a kernal panic.  I can not get the Aperture troubleshooting menu to open...any help?

    My aperture library will not open after restoring my whole computer after a kernal panic.  I can not get the Aperture troubleshooting menu to open...any help?

    Leonie,
    Fisrt let me thank you for your reply and assistance!  So here is the problem with so more detail...I was not sure I was going to get any replies ; )
    I restored from a time machine back up.
    History of Failure:
    I was trying to launch Aperture when the kernal panic occured.  My computer had been closed, and asleep and the battery was dead.  I plugged in charger and it was restoring/waking up after being asleep/shutting down from dead battery.  I launched Aperture from the dock and as soon as it opened the kernal panic occured.  After that the computer would not turn on.  It would try to boot then it would shut off.  I even tried to safe boot to no avail.  I went to the Apple store and they told me that the only thing I could do was restore whole computer from back up.  So thats what I did.
    Since then my previous aperture library: "2011" will not open.  I have created a new aperture library "2012", and it runs fine.  I have added new photos for about the past month...no problems. 
    When I launch aperture with 2012 library then try to switch libraries, I get the following prompt: "The selected library is from an older version of Aperture and requires a relaunch to switch."  I choose "Relaunch" and I get the following warning prompt: "There was an error opening the database for the library “~/Pictures/Aperture Library 20111.aplibrary”."  The only option is "Quit"
    Both libraries are version 3.2.3
    Computer stats: 3.06 GHz Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, OS X 10.6.8
    I have tried to launch aperture troubleshooting by holding option+command from both the aperture icon and from the library file, neither will launch the troubleshooting feature.
    I am ok with computers, but not a whiz (mechanical engineer)...to me it seems as though there is a corrupt path or file or some sort of "check" that is failing, becuase the failure occurs so fast after trying to launch aperture. Maybe that doesn't make any sense but just a thought.
    I hope that you may be able to provide some insight.  Thank you again for you time and I hope that you have a nice day!
    Mike

  • HT1338 motion 4 will not work after yosemite upgrade

    motion 4 will not work after yosemite upgrade

    To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
    I am afraid the more the OS is updated the less compatible certain applications will become.
    Good Luck
    h

  • HT201412 phone will not activate after restore

    My iphone 3gs will not activate after restore.

    That's almost always because the phone was hacked or jailbroken to unlock it from the original carrier.
    Where EXACTLY did you get the phone? Did you or a previous owner ever get it "unlocked" by someone other than the carrier it was originally locked to?

  • HT201263 iphone 3gs will not activate after restore and update?

    Please help my iphone 3 gs will not activate after restore and update.

    If it is locked to any carrier, insert SIM from the carrier. If it is unlocked insert any SIM to activate.

  • I have an ipad 1 16gb, wifi and the wifi will not work.  Under settings, it says "no wifi".  Has anyone else had this problem?

    I have an ipad1 and the wifi will not work.  It is a wifi only model which makes it more interesting.  When I go into settings, it says "no wifi".  Does anyone have a solution to my problem?  It is much appreciated.

    If you are positive there is a good Wi-Fi signal in the area of the iPad I would first reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    If that doesn't work, I would turn off your iPad and then restart your Wi-Fi router. Unplug the router for 30 seconds then plug it back in. Once the router had completed its restart process and established a link to the Internet then turn your iPad on. Make sure Settings > Wi-Fi> On.

  • My Wifi is not working after re setting the net work also

    My Wifi is not working after re setting the network also.

    Read here:
    http://support.apple.com/kb/ts1559
    If nothing helps, make an appointment at any Apple store.

Maybe you are looking for

  • Process execution engine execution error. from the latest HF in BPM Ent.

    Hi All, After applying the latest hotfix, I'm now getting this error when trying to launch any of the application. My setup is AquaLogic BPM Enterprise 6.0.4 for Weblogic. I've tried redeploying all the deployments within Weblogic and also the Admin

  • Will apple universal dock improve sound quality?

    I use RCA plugs to hook up my ipod touch to my home stereo. Will adding an apple universal dock improve sound quality?

  • BSR code for TDS certificate purpose

    Dear Team, I have maintained BSR code in *Bank branch fields  of  Bank key* for TDS certificate purpose  , But it is not updating correctly in Form 16A (TDS certificate ) and Bank Key has updating instead of BSR code . Please suggest me any other fil

  • Require to Find the Country Based on SALES ARea.

    Hi, Any one can tell me the TABLE Relations/FM to get the Country based on the Sales Organisation? Thanks, Sekhar.J

  • New To SAP need Help

    Hi All, I have a Master Degree In Computer Science (MCA [1998] From India). Presently working as a Senior Programmer for a company located in NJ from 2003. S/W Back Ground: Java, XML, VB, SQL, and JavaScript Database: Oracle, Informix, and MYSQL Plat