HT204411 What app store should be used for Aruba and the US virgin islands?

When submiting an App to be listed, I don't see an obvious country for these islands?

There is no iTunes Store for Aruba. For the US Virgin Islands you would list the US iTunes Store, I believe, though I'd suggest confirming that residents of the USVI can indeed use the US Store.
Regards.
Message was edited by: varjak paw

Similar Messages

What is SM62 Tcode is used for? and the consequence's for executing it?

What is SM62 Tcode is used for? and the consequence's for executing it?
Thank you,
York

Hi Les,
You can goto this URL to understand more about events :
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/c079239d3756a2e10000000a1553f6/frameset.htm
http://www.sapfans.com/sapfans/sapfaq/robert.htm
About my experience working with events:
In one of my BW Project: we were using AutoSys to do job scheduling (to run InfoPackages).
To automate the loading process we created events for each infopackage. Then in that Infopackage we used to select option "Start later in Background" and then select option "After Event". Then specified the event name and parameter.
Then in the same infopackage we selected button "Subsequent Process" the in that seelct option "Trigger Events" Here you can have options to specify if this event is successful then what next event to trigger and if this event fails what next event to trigger.
So this way we used to automate data loads.
This was dont caz there was no process chains concept during that time. So good example of events and event based process are PROCESS CHAINS.
Hope this helps !!
Assign points if helps !!
Regards,
Naveen Rao Kattela

What pdf tag should I use for footnotes?

I get involved in generating fully accessible tagged pdf's for asisstive technologies and the like. I have a doc in InDesign which uses footnotes. When I tag the document, should I map the footnotes (paragraph) style to a particular predefined pdf tag (http://www.alistapart.com/d/pdf_accessibility/PDFtags.html) and if so which one? P, STORY, NOTE....? I'm not sure and can't find any reference out there to help me.

offtheroad wrote:
What instrument area should I use for pulling in iTunes files to edit together, Voice, guitar, ...
drop the files into a blank area of the timeline and GB will create a track for the files. if you want to do it manually, create a New Basic Track

I'm showing a video on a wall that's 3646 x 768 px. What project dimensions should I use to best fit the space?

I'm showing a video on a wall that's 3646 x 768 px. What project dimensions should I use to best fit the space?

Try this : http://library.creativecow.net/payton_t/FCPX_Custom-Resolution-Timelines/1
Switchie2

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

I'm going to take a guess and say that if your TV has 2 HDMI ports, it also has a component input (5 wire). I'm also going to guess that either your DirecTv or your Blueray has a component output option. If I had this setup, I would put my DTV on the component option and use the open HDMI port for the ATV2.
I doubt you will be able to tell the difference on your DTV. Most of the stores that demo HD use component wiring on their store models. The only downside is that you may be giving up the highest sound (Dobly 5.1 or whatever they call it.)
Or you could just go to switching the HDMI cords from your BluRay to the ATV2 depending on which one you are watching. I think I use my BluRay about 5% or less of my viewing time. If I "tossed", I wouldn't shed a tear.

My iPhone says I have 5 app store updates. I press update and the wheel just spins and it never updates. the Icon stays black like its updating, but in never does

my iPhone says I have 5 app store updates. I press update and the wheel just spins and it never
updates. the Icon stays black like its updating, but in never does

Hello Donna,
I'm sorry to hear you are having issues with your iPhone. If you are having issues completing your app updates, you may want to make sure you can otherwise access the iTunes Store/iOS App Store. You may want to try the troubleshooting steps outlined in the following article:
Can't connect to the iTunes Store - Apple Support
If the iOS version listing in your post profile is correct (iOS 8.0.2), you may also want to make sure that your iPhone is updated to the most recent version of iOS:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
Sincerely,
- Brenden

HT5244 what flash player should I use for eBay when using google chrome ?

I just purchased a new Mac 2013 model because I know they are excellent systems and due to viruses that ruined 2 windows laptops with virus protection in 3 months (FBI Virus). Being I am a new Mac user and still learning I need iMac for dummies lol, I am okay with iOS but having trouble with Mac (nothing like any of my iPhone's) I run a business on eBay & I am at the point of getting my own site up but that is another topic. Being I use eBay a lot with Google Chrome, reason is I can not edit my pictures as much in detail when I use Safari (I prefer Safari over chrome) . I also purchased from Mac App Store Auction Listing Designer for eBay but unfortunately $29.99) having trouble with that also and have not been able to use it once. I downloaded Adobe Flash Player about 5 weeks ago but do not see what version it is, before I downloaded Adobe, I called Apple Care which I have to say are GREAT and worth every penny of Apple Care + 3 years. I will get to the point, what is recomended as far as flash player when using sites like eBay ?
Thank you

The most current version of Adobe Flash Player.

What sequence setting should I use for a High Quality Video Montage?

I am about to start a new project for a client using photographs only. I have two questions:
1. What should I use for the sequence settings? Should I edit with a HD sequence setting?
2. I am going to scan the pics myself. What Pixel or resolution is appropriate to get the best quality? I'm looking for wide screen 16 x 9, not 3 x 4.

First, decde how you are going to deliver this production to your client. Then tell us what that delivery medium will be. Then we'll have some advice for you.
See the section in the FCP manual on using still images. You need to understand that in video there are only pixels, no dots per inch or lines per inch. Those terms are meaningless in video. You wil sand at a size in raw pixels that is only slightly larger than your delivery format.
bogiesan

What printer should I use for pc and iPad iPhone use

What printer(s) should I use on a wireless network that has pc, iPad and iPhone as devices?

How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
 Cheers, Tom

How do i know what app store account was used to install an app on my macbook pro?

Hi All,
For about a year i have been bugged by the app store that i a couple of apps that are not up to date. I have tried to find the account that the app was installed with. I have found three accounts on my name, i logged in with all of them but no luck. How can you figure out under what name an app was installed?
Thanks for any suggestions,
Aad Nales
PS: I the maps fiasco was enough to get some people fired, then this should even lead to more job changes :-)

Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
1. Follow the instructions in the Apple Support article linked below:
Mac App Store: Cannot update App Store purchases or updates do not seem available
2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
5. Triple-click the line below to select it:
/Library/Caches/com.apple.appstore/adoption.plist
Right-click or control-click the highlighted line and select Services ▹ Reveal from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
Then repeat step 4.
6. Select Store ▹ View My Account from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
7. Launch iTunes and select Store ▹ Authorize This Computer from the menu bar.
8. If you've moved any App Store apps out of the applications folder, or into a subfolder, put them back. Never move or copy those applications.
9. Contact Account and Billing Support on this page:
Apple - Mac App Store - Contact Support

What Compressor codec should I use for footage recorded on a Canon T3i, edited on FCP 6, and intended for Vimeo?

I am looking for help!
My planned workflow is as follows:
Footage recorded on Canon Rebel T3i ---> Edited on Final Cut Pro 6 (sequence compression is apparently H.264 according to the browser) ---> Compressed with Compressor (ver 3.0.5) in original 1920 x 1080, 24p format ---> Uploaded to Vimeo
I am now at the point where I am trying to find a Compressor setting that will create a compressed movie that looks somewhat similar to what I see in the canvas in Final Cut Pro 6. I have tried using the H.264, Apple ProRes 422(HQ), HD Uncompressed 8-bit, and XDCAM HD 1080p24 settings and in all cases, my movie plays back fine, however, the brightness/exposure seems to be hiked up a few stops and there is a substantial amount of noise in both the blacks and midtones that doesn't appear in FCP's canvas.
My compressed movie I wish to export is only intended for Vimeo (similar to Youtube). Is there a different setting I should be trying, or perhaps a way of downloading a more effective or current codec?? Any suggestions are greatly appreciated as it is very disappointing to see my movie degraded so much from its orginal quality.
Shaun M

H.264. But the FCP Legacy (FCP 7 and earlier) Canvas and Viewer aren't color accurate. Not designed to be. Their purpose is to show you what you are doing, show you the footage so you can make editing decisions. For color accuracy, the ideal way, since this was designed with television and feature editing in mind, is to have an IO device like those AJA.com and DECKLINK.com make, and send the signal to an HDTV or broadcast monitor.
Apple has realized that more and more people are editing for the web and computers only, so they made it so that FCX's viewer IS color accurate. So...what that means is that currently, using what you have, you won't get things to match....they aren't designed to. So you can adjust for what happens when you export.
But a big issue is that you are editing H.264 in FCP native. FCP doesn't work with H.264 native well, all sorts of potential issues can arise. Sync issues, quality issues, the correct shot be exported, all sorts of things. FCP works best with the FCP editing codecs. What are they? They are found in the EASY SETUP list. But for HD, the most commonly used option is ProRes 422. There is a BIG problem that FCP Legacy will SEEM like it'll work with H.264 natively just fine...it doens't throw up any warnings. That is bad. Also something Apple fixed with FCX.
The fact that you are editing H.264, and trying to export H.264, might also lead to the footage being more off that it would if you edited ProREs 422, and exported H.264. Note...H.264 is a higher data rate codec, and easier for FCP to work with...but because it has a higher data rate, the file sizes are much higher than the original H.264. 5-6x larger. FCP 7 did have a way to import Canon 5D, 7D and T2i (needed a hack with the T2i) via Log and Transfer. But it doesn't work with the T3i...not even with that hack. Because FCP 7 was no longer updated after the T3i came out. It's 4 year old software, discontinued 2 years ago.
If you want to edit native, you need to look at Adobe Premiere Pro CC. It's interface is more accurate too.

FAQ: What system hardware should I use for Photoshop?

We all know we can find the Minimum System Requirements on the side of any software box. For the most recent version of Photoshop you can check the Tech Specs. If you'd like info on the older versions, you can check here.
What does it mean if your computer meets the Minimum System Requirments? Well, you'll be able to install and launch the software without an error. Not meeting some of the minimum requirements could result in a hard or soft stop when installing. A hard stop prevents the installation from continuing because critical requirements are not met. A soft stop is a warning that you may encounter issues if you continue, but you can make that judgement on your own.
But meeting the minimum requirements isn't necessarily give you a happy experience with Photoshop, especially if you work with large file normally. We normally don't make recomendations on the type of hardware you use on your system. We've changed our minds. Here is a list of recommendations for Good, Better, and the Best systems:
System and hardware recommendations: Beyond the minimum

Hello Brinmr,
i do not hava license for matlab so i can not test it.
On this page you found the supported NI hardware and here is the information the 6008 can be
used in session mode Supported Hardware - National Instruments- NI-DAQmx
and if i understand the function startForeground correct is this a session mode function.
You can made some tests with a simulated 6321 or 6251, but if this also not works then you should contact
the mathworks to ask them how you should implement your functions with mathlab.
best regards
Alexander Glasner
AE NIE

What file formats should I use for maps?

I've come to the IL forum simply because of the number of file formats IL will process. My question however is more generic to file formats.
I work with a large local county government (just as a citizen) and one of the projects we're working on is to get a full suite of maps (and other GIS output) for distribution. Although they will be made available online, the intent is to print/plot.
For some maps, we'll want to have the capability to add vector graphics (ovals, rectangles, text, arrows) for highlighting.
The intent is for the county to provide machine readable GIS output so that we can do our own printing (via Kinkos for example). We'll also be putting the maps online although only for simple viewing and downloads.
What file format(s) should I ask to have the map sets in?
Because I'm a novice when it comes to understand which format to ask for I've done some homework on jpg, tiff, gif, etc. I think IL will take in any of them and that's where any vector graphics would be added (for print destined output). I also have FW which could be used for web destined output if needed.
What is most important is the quality of the printed output so I'm assuming dpi is going to be important. I'm also assuming that we'll ask for the output to be intended for a rather large plot (e.g. 36" x 48" or perhaps even larger) even though we may not actually produce a map of that size. For what I've learned on this and other Adobe forums, no matter what file size and format we get, printing to larger paper will eventually lose visible resolution thus the intent to start with the largest we'd ever print. We might have circumstances where we would crop but again understand what can happen when blowing those up.
One option, of course, is to have the county produce PDFs. Is that a good idea for our purpose meaning do we lose anything to have the file format generally acceptable? I'm assuming somewhere along the process we'll need to produce pdfs for downloads but that may not be the best format to get from the GIS output.
Keep in mind that we don't have GIS software at present. In the future we may move to using a GIS viewer which would mean we would have file generation capabilities, but for now, we're going to have to handle non-gis output files.
I'm not even sure I'm asking the question well so feel free to educate me along the way. I'm interested in learning.
Tom

(pricy) I know that may sound strange given having CS2,
Yep. Sure does. Plus:
So in comparing prices, be sure to include the costs of the third-party plug-in route, such as MAPublisher (and the associated headaches of mission-critical dependence upon third-party add-ons in general).
Since IL can take in pdfs and can add vector markup
Working with PDFs is pretty much universal these days, for practical purposes.
Understand this about PDFs and Illustrator: Illustrator's Save As...PDF dialog provides an option for "Preserve Illustrator Editing Capabilities." Selecting that option actually embeds in the resulting file a full duplication of the file as native Illustrator objects. That results in very bloated PDF file sizes--because they contain two full copies of the file.
That's not what you want to do for PDFs that will be distributed/downloaded. So you're going to want to keep your AI-native files separate anyway. Opening a PDF that was saved without that option turned on in Illustrator is pretty much the same thing as opening it other mainstream drawing progams. So the "seamlessness" of PDF/Illustrator is really much about marketing.
But no matter. Your mind is already made up to use AI for this. If it were me, I'd be exploring all options.
JET

Hi, I have an iPhone 5s. I just downloaded the Hulu Plus app from the app store and it says that I can open it while I'm in the App Store however, it won't open and the app icon is not anywhere on my actual screen. What can I do to fix this?

Hi, I have an iPhone 5s. I just downloaded the Hulu Plus app for my iPhone and in the app store it's as I can open it however when I hit open, it does not open in fact, nothing happens. Also there is no icon for Hulu Plus on my home screen so I'm confused as to what exactly to do I'm going to settings and there's only one thing that you can do which is reset. I tried that. nothing.

Have you restarted your phone?
If so, try a reset. Press and hold the home & sleep/wake buttons until the screen goes blank, ignoring the power off slider if it comes up.
Check for the app again after the phone starts back up.
~Lyssa

Which BUs Object should I use for archiving and linking to SalesDocuments

Hi,
I want to archive documents and link them to SalesDocuments, but I don't know which BUsiness Object I should use. Special Ones like BUS2030, BUS2031,... or the general Type VBAK. If I use VBAK I have the problem, that when I archive manually all with VBAK linked documenttypes are proposed, so that I can't control, which documents are allowed to be linked with for instance CustomerQuotation or SalesOrder.

Hello Marc,
For Sales Order user object type as BUS2032
Customer Quotation- BUS2031
Customer Inquiry - BUS2030
BUS2033          Customer complaint order
BUS2034          Customer Contract
BUS2035          Customer scheduling agreement
BUS2051          Customer outline agreement
BUS2094          Credit memo request
Hope this will answer your question.
-Thanks,
Ajay

HT204411 What app store should be used for Aruba and the US virgin islands?

Similar Messages

Maybe you are looking for