HT2101 Why is phone consuming so much of battery

My phone consuming so much of battery

Hello Amit2255,
Thank you for the details of the issue you are experiencing with the battery life on your iPhone 5.
The link below has suggestions to adjust a few settings:
Battery & power
Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
Find more information here:
iPhone Repair - Battery & Power
http://www.apple.com/support/iphone/repair/battery-power/
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

Hi Since updating to ios 7.04 i have noticed the phone consumes so much more power. I have to charge the phone twice sometimes 3 times a day. WHY?

Hi Since updating to ios 7.04 i have noticed the phone consumes so much more power. I have to charge the phone twice sometimes 3 times a day. WHY?

Hi,
Thanks! I forgot to add, I have debonded and rebonded the bluetooth in car and phone and have carried out 3 restores on the phone in my ITunes. All to no avail. I have also jsut spent £40 on a lead from Ford that has made no difference too! I went to them today to request a software upgrade on my car as I though perhaps the lack of connectivity in the car was down to the car being behind the iOS5 software but was informed there was no need for an upgrade and this problem is purely an apple problem! Is there any way around the downgrade? Or are apple gong to resolve this problem at all??

Why is ArchLinux consuming so much RAM?

I really don't know where to start with this thread. Hoping a few of you veterans will be able to help pinpoint my memory consumption by ArchLinux. I have read lots of places where ArchLinux runs with a very small memory footprint, but that hasn't been my experience, which is tragic becuase I really like ArchLinux the most of all the distros I've tried.
I don't have anything that usual installed, I don't think. If I go from a fresh boot up, my experience is that I end up using about 400MB out of the 768 MB total physical memory (eventually my system will slow to a crawl with about 95% of RAM used). And I'm not really doing much. A little Audacious, a little file mgmt with Thunar, a little web browsing...that's it really. I expected some rogue application to be to blame but that doesn't seem to be the case. It appears to be XFCE stuff mostly (and Thunar). Here's what my system shows right now if I do
$ps -aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.0 1592 536 ? Ss Sep03 0:00 init [3]
root 2 0.0 0.0 0 0 ? S< Sep03 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? S< Sep03 0:00 [migration/0]
root 4 0.0 0.0 0 0 ? SN Sep03 0:00 [ksoftirqd/0]
root 5 0.0 0.0 0 0 ? S< Sep03 0:00 [watchdog/0]
root 6 0.0 0.0 0 0 ? S< Sep03 0:00 [events/0]
root 7 0.0 0.0 0 0 ? S< Sep03 0:00 [khelper]
root 31 0.0 0.0 0 0 ? S< Sep03 0:00 [kblockd/0]
root 32 0.0 0.0 0 0 ? S< Sep03 0:00 [kacpid]
root 33 0.0 0.0 0 0 ? S< Sep03 0:00 [kacpi_notify]
root 113 0.0 0.0 0 0 ? S< Sep03 0:00 [kseriod]
root 135 0.0 0.0 0 0 ? S Sep03 0:00 [pdflush]
root 136 0.0 0.0 0 0 ? S Sep03 0:00 [pdflush]
root 137 0.0 0.0 0 0 ? S< Sep03 0:00 [kswapd0]
root 138 0.0 0.0 0 0 ? S< Sep03 0:00 [aio/0]
root 273 0.0 0.0 0 0 ? S< Sep03 0:08 [ata/0]
root 274 0.0 0.0 0 0 ? S< Sep03 0:00 [ata_aux]
root 278 0.0 0.0 0 0 ? S< Sep03 0:00 [scsi_eh_0]
root 280 0.0 0.0 0 0 ? S< Sep03 0:18 [scsi_eh_1]
root 614 0.0 0.0 0 0 ? S< Sep03 0:00 [ksuspend_usbd]
root 617 0.0 0.0 0 0 ? S< Sep03 0:00 [khubd]
root 1186 0.0 0.0 0 0 ? S< Sep03 0:00 [kjournald]
root 1231 0.0 0.0 1772 636 ? S<s Sep03 0:01 /sbin/udevd --daemon
root 1781 0.0 0.0 0 0 ? S< Sep03 0:00 [kgameportd]
root 3980 0.0 0.0 0 0 ? S< Sep03 0:00 [kpsmoused]
root 4368 0.0 0.0 0 0 ? S< Sep03 0:00 [scsi_eh_2]
root 4369 0.0 0.0 0 0 ? S< Sep03 0:00 [usb-storage]
root 4993 0.0 0.0 0 0 ? S< Sep03 0:00 [kjournald]
root 4994 0.0 0.0 0 0 ? S< Sep03 0:00 [kjournald]
root 4995 0.0 0.0 0 0 ? S< Sep03 0:00 [kjournald]
root 5151 0.0 0.1 2220 792 ? Ss Sep03 0:00 /usr/sbin/syslog-ng
root 5165 0.0 0.0 1740 504 ? Ss Sep03 0:00 /sbin/dhcpcd -t 30 -h TuxTixi eth
root 5177 0.0 0.0 1620 544 ? S Sep03 0:00 /usr/sbin/crond
root 5189 0.0 0.1 14404 1252 ? Ss Sep03 0:00 ./hpiod
root 5193 0.0 0.6 11608 4996 ? S Sep03 0:00 python ./hpssd.py
root 5202 0.0 0.3 5316 2364 ? Ss Sep03 0:08 /usr/sbin/cupsd
dbus 5216 0.0 0.1 2232 1000 ? Ss Sep03 0:00 /usr/bin/dbus-daemon --system
hal 5219 0.0 0.4 4936 3144 ? Ss Sep03 0:00 /usr/sbin/hald
root 5220 0.0 0.1 3136 1152 ? S Sep03 0:00 hald-runner
hal 5227 0.0 0.1 2000 880 ? S Sep03 0:00 hald-addon-keyboard: listening on
hal 5228 0.0 0.1 2000 876 ? S Sep03 0:00 hald-addon-keyboard: listening on
hal 5229 0.0 0.1 1996 872 ? S Sep03 0:00 hald-addon-keyboard: listening on
hal 5232 0.0 0.1 1996 868 ? S Sep03 0:00 hald-addon-acpi: listening on acp
root 5246 0.0 0.1 3188 1088 ? S Sep03 0:01 hald-addon-storage: polling /dev/
root 5248 0.0 0.1 3184 1084 ? S Sep03 0:08 hald-addon-storage: polling /dev/
root 5250 0.0 0.1 3184 1088 ? S Sep03 0:08 hald-addon-storage: polling /dev/
root 5253 0.0 0.1 2340 1136 tty1 Ss Sep03 0:00 /bin/login --
root 5254 0.0 0.0 1588 496 tty2 Ss+ Sep03 0:00 /sbin/agetty 38400 vc/2 linux
root 5255 0.0 0.0 1588 492 tty3 Ss+ Sep03 0:00 /sbin/agetty 38400 vc/3 linux
root 5256 0.0 0.0 1592 500 tty4 Ss+ Sep03 0:00 /sbin/agetty 38400 vc/4 linux
root 5257 0.0 0.0 1592 500 tty5 Ss+ Sep03 0:00 /sbin/agetty 38400 vc/5 linux
root 5258 0.0 0.0 1588 496 tty6 Ss+ Sep03 0:00 /sbin/agetty 38400 vc/6 linux
tom 5269 0.0 0.2 4532 1736 tty1 S Sep03 0:00 -bash
tom 5273 0.0 0.1 4484 1396 tty1 S+ Sep03 0:00 /bin/sh /usr/bin/startx
tom 5289 0.0 0.0 2572 720 tty1 S+ Sep03 0:00 xinit /home/tom/.xinitrc -- -auth
root 5290 4.3 3.0 28088 23512 tty7 S<s+ Sep03 74:03 X :0 -auth /home/tom/.serverauth.
tom 5308 0.0 0.1 4220 1376 tty1 S Sep03 0:00 /bin/sh /etc/xdg/xfce4/xinitrc
tom 5311 0.0 0.0 4480 760 tty1 S Sep03 0:00 /bin/sh /etc/xdg/xfce4/xinitrc
tom 5313 0.0 0.3 4484 2584 tty1 S Sep03 0:00 xscreensaver -no-splash
tom 5318 0.0 0.0 2708 632 tty1 S Sep03 0:00 /usr/bin/dbus-launch --sh-syntax
tom 5319 0.0 0.1 2236 1020 ? Ss Sep03 0:00 /usr/bin/dbus-daemon --fork --pri
tom 5321 0.0 1.6 26060 13048 tty1 S Sep03 0:01 /usr/bin/xfce4-session
tom 5325 0.0 1.3 29588 10324 ? Ss Sep03 0:01 xfce-mcs-manager
tom 5326 0.0 0.8 14264 6832 tty1 S Sep03 0:01 xfwm4 --sm-client-id 11c0a8126400
tom 5327 0.0 2.1 62196 16964 tty1 S Sep03 0:01 Thunar --sm-client-id 11c0a812640
tom 5328 0.0 2.3 41252 18336 tty1 S Sep03 0:17 xfdesktop --sm-client-id 11c0a812
tom 5330 0.0 1.8 28088 14436 tty1 S Sep03 0:02 xfce4-panel --sm-client-id 11c0a8
tom 5332 0.0 3.7 59400 28948 ? Ssl Sep03 0:04 mono /usr/lib/tomboy/Tomboy.exe
tom 5335 0.0 0.7 12988 5732 tty1 S Sep03 0:08 /usr/lib/xfce4/xfce4/panel-plugin
tom 5336 0.0 1.7 28264 13956 tty1 S Sep03 0:01 /usr/lib/xfce4/xfce4/panel-plugin
tom 5337 0.0 1.6 26544 13140 tty1 S Sep03 0:13 /usr/lib/xfce4/xfce4/panel-plugin
tom 5339 0.0 0.2 5048 2216 ? S Sep03 0:00 /usr/lib/GConf/gconfd-2 21
tom 7011 0.0 2.3 32168 18612 ? Ss 17:35 0:01 Terminal
tom 7012 0.0 0.0 2420 652 ? S 17:35 0:00 gnome-pty-helper
tom 7013 0.0 0.2 4532 1668 pts/0 Ss 17:35 0:00 bash
tom 7183 0.0 0.1 4228 1428 ? S 21:04 0:00 /bin/sh /opt/mozilla/bin/firefox
tom 7187 0.0 0.1 4224 1432 ? S 21:04 0:00 /bin/sh /opt/mozilla/lib/firefox-
tom 7192 5.3 7.8 158728 61260 ? Sl 21:04 1:21 /opt/mozilla/lib/firefox-2.0.0.6/
root 7205 0.0 0.1 3600 924 pts/0 S 21:04 0:00 su
root 7206 0.0 0.2 4264 1672 pts/0 S 21:04 0:00 bash
root 7211 0.0 0.5 10708 4024 pts/0 S+ 21:07 0:00 vi /etc/rc.conf
tom 7258 0.0 0.2 4532 1668 pts/1 Ss 21:28 0:00 bash
tom 7260 0.0 0.1 3552 996 pts/1 R+ 21:29 0:00 ps -aux
I'm astounded that xfce-related items would consume so much memory. Also, Tomboy and Firefox really eat up memory in a hurry. Thunar, too. Is this normal? Doesn't seem like it should be...
Oh, fyi, the daemons loaded at startup are:
DAEMONS=(syslog-ng network netfs crond alsa hplip cups hal)
Any help would be appreciated here. I can send over any specifics about my system or outputs of a command as needed for remote troubleshooting. Thanks!
Last edited by wrycatcher (2007-09-05 05:01:07)

wrycatcher wrote:I don't have anything that usual installed, I don't think. If I go from a fresh boot up, my experience is that I end up using about 400MB out of the 768 MB total physical memory (eventually my system will slow to a crawl with about 95% of RAM used).
If it never exceeds 95% , I don't see why there should be any slow downs.
Does it swap ? Thats much more important to check than the memory usage (even if its obviously linked).
If a lot of swap is used, then it's very bad indeed, and you're left with the two obvious choices :
1) get more memory
2) use less memory hungry apps
Recently, I set up Ubuntu (which is more bloated than Arch, with a ton of unneeded crap by default) on a box with 256 MB.
Just booting into an empty gnome session filled up all ram. Then trying to start OpenOffice made the system swap badly,
and it was very slow.
I upgraded it to 512 mb, and everything is fine now.
So I find it strange that 768 mb can't handle arch + xfce.

Why does coreaudiod consume so much cpu?

I looked into activity monitor and found coreaudiod consuming 30-40% cpu cycles on my iBook. I have no songs, videos or alert sounds playing.
Can any one tell me what is happening? Why is coreaudiod bugging my cpu? How can i prevent it?
iMac G4 FP 17, iBook G4 14, iPod G3 Mac OS X (10.4.3) PC on XP, 2k & Linux

Edit: i tried to quit it then the trash empty sound came out
[i empty my trash like 30mins ago] - a coreaudiod hang?

Why does Magic Mouse use much more battery power than the keyboard?

I have the Bluetooth versions of the keyboard and the Magic Mouse. I use the same rechargeable batteries in each. Yet the mouse has now come to the end of a THIRD set of AAs, while the keyboard still has 60% of its first set.
Why? They are both constantly in use, so why does the Mouse drain batteries so much faster than the keyboard? Viz: the mouse about once a week (two, max), while at this rate, it will be another month or more before the keyboard drains.

Actually I don't! I consider myself a 'power user' in that I will always use the keyboard first, and I learn keyboard shortcuts for nearly everything I do regularly.
I would guess my use is 50:50 at worst?

Why do i have so much other on my phone and how do i get rid of it

why do i have so much other on my phone and how do i get rid of it

Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414
More Info Here...
maclife.com/how_remove_other_data_your_iphone

[SOLVED] Why do closed nvidia graphic drivers consume so much RAM?

I'm using nvidia Geforce 7600GT graphic card, and I tried to install nvidia-304xx graphic drivers. Everything went smoothly, but after my system started I saw that there is 4x times more RAM consumption when compared it to nouveau driver. See the following pics:
http://img849.imageshack.us/img849/7117/starto.png
up: nouveau || down: nvidia
http://img35.imageshack.us/img35/148/graphicq.png
left: nouveau || right: nvidia
I've been trying to solve this issue for 2 weeks, but I have no idea why my system consumes almost 400 MiB of RAM when only openbox is started. Compared to debian + full gnome -- 280MiB. Both systems are using the same nvidia driver. I tried even to borrow the kernel from debian and then install the drivers, but this doesn't help. Still apps in the graphic environment consume several times more RAM.
As you can see, having only 1GiB of RAM I can't afford to have 400MiB openbox. Try to think about opening web browser or other apps. xD
Does anyone know why this is happening and how to fix it? I saw similar thread on this forum, but I can't find it anymore, and there was exactly the same situation, or more or less.
For better insight -- data from http://www.pixelbeat.org/scripts/ps_mem.py
Nouveau:
Private + Shared = RAM used Program
76.0 KiB + 20.0 KiB = 96.0 KiB sleep
108.0 KiB + 27.0 KiB = 135.0 KiB agetty
120.0 KiB + 17.0 KiB = 137.0 KiB gpm
112.0 KiB + 26.5 KiB = 138.5 KiB gnome-pty-helper
180.0 KiB + 19.5 KiB = 199.5 KiB dhcpcd
176.0 KiB + 32.5 KiB = 208.5 KiB dbus-launch
224.0 KiB + 50.0 KiB = 274.0 KiB rtkit-daemon
288.0 KiB + 108.0 KiB = 396.0 KiB dnscrypt-proxy (2)
388.0 KiB + 42.5 KiB = 430.5 KiB hddtemp
416.0 KiB + 73.0 KiB = 489.0 KiB systemd-logind
504.0 KiB + 68.5 KiB = 572.5 KiB bluetoothd
384.0 KiB + 218.5 KiB = 602.5 KiB fancontrol
444.0 KiB + 185.5 KiB = 629.5 KiB gconf-helper
500.0 KiB + 132.5 KiB = 632.5 KiB gconfd-2
432.0 KiB + 224.0 KiB = 656.0 KiB login
448.0 KiB + 276.0 KiB = 724.0 KiB avahi-daemon (2)
656.0 KiB + 69.5 KiB = 725.5 KiB smartd
684.0 KiB + 42.5 KiB = 726.5 KiB hamachid
732.0 KiB + 110.5 KiB = 842.5 KiB ntpd
912.0 KiB + 51.5 KiB = 963.5 KiB systemd-udevd
616.0 KiB + 378.5 KiB = 994.5 KiB cups-browsed
932.0 KiB + 149.5 KiB = 1.1 MiB xscreensaver
676.0 KiB + 409.5 KiB = 1.1 MiB dbus-daemon (2)
968.0 KiB + 238.5 KiB = 1.2 MiB obex-data-server
804.0 KiB + 628.0 KiB = 1.4 MiB bash (2)
1.0 MiB + 379.0 KiB = 1.4 MiB cupsd
1.2 MiB + 494.5 KiB = 1.7 MiB devilspie
1.7 MiB + 90.5 KiB = 1.8 MiB systemd
1.3 MiB + 806.5 KiB = 2.1 MiB tint2
1.9 MiB + 628.0 KiB = 2.5 MiB slim
7.0 MiB + -3819.5 KiB = 3.2 MiB polkitd
2.6 MiB + 729.0 KiB = 3.3 MiB openbox
2.2 MiB + 1.3 MiB = 3.5 MiB avant-window-navigator
2.3 MiB + 1.3 MiB = 3.7 MiB pnmixer
3.4 MiB + 468.5 KiB = 3.8 MiB pulseaudio
4.2 MiB + 534.5 KiB = 4.7 MiB systemd-journald
3.8 MiB + 1.6 MiB = 5.5 MiB awn-applet
5.2 MiB + 2.2 MiB = 7.4 MiB conky (3)
10.0 MiB + 512.5 KiB = 10.5 MiB Xorg
8.6 MiB + 2.2 MiB = 10.8 MiB applet.py
10.0 MiB + 2.3 MiB = 12.3 MiB blueman-applet
11.4 MiB + 2.7 MiB = 14.1 MiB terminator
107.2 MiB
=================================
Nvidia:
Private + Shared = RAM used Program
108.0 KiB + 27.5 KiB = 135.5 KiB gnome-pty-helper
108.0 KiB + 28.0 KiB = 136.0 KiB agetty
128.0 KiB + 18.0 KiB = 146.0 KiB gpm
180.0 KiB + 19.5 KiB = 199.5 KiB dhcpcd
176.0 KiB + 34.5 KiB = 210.5 KiB dbus-launch
224.0 KiB + 53.0 KiB = 277.0 KiB rtkit-daemon
284.0 KiB + 109.0 KiB = 393.0 KiB dnscrypt-proxy (2)
392.0 KiB + 44.5 KiB = 436.5 KiB hddtemp
424.0 KiB + 76.0 KiB = 500.0 KiB systemd-logind
440.0 KiB + 73.5 KiB = 513.5 KiB bluetoothd
496.0 KiB + 144.5 KiB = 640.5 KiB gconfd-2
424.0 KiB + 227.0 KiB = 651.0 KiB login
448.0 KiB + 213.5 KiB = 661.5 KiB gconf-helper
680.0 KiB + 46.5 KiB = 726.5 KiB hamachid
656.0 KiB + 74.5 KiB = 730.5 KiB smartd
456.0 KiB + 281.0 KiB = 737.0 KiB avahi-daemon (2)
732.0 KiB + 116.5 KiB = 848.5 KiB ntpd
900.0 KiB + 53.5 KiB = 953.5 KiB systemd-udevd
616.0 KiB + 382.5 KiB = 998.5 KiB cups-browsed
592.0 KiB + 407.5 KiB = 999.5 KiB dbus-daemon (2)
944.0 KiB + 170.5 KiB = 1.1 MiB xscreensaver
1.0 MiB + 382.0 KiB = 1.4 MiB cupsd
852.0 KiB + 802.0 KiB = 1.6 MiB bash (2)
1.7 MiB + 94.5 KiB = 1.8 MiB systemd
1.9 MiB + 662.0 KiB = 2.6 MiB slim
2.6 MiB + 757.0 KiB = 3.3 MiB openbox
3.4 MiB + 514.5 KiB = 3.9 MiB pulseaudio
7.9 MiB + -3780.5 KiB = 4.3 MiB polkitd
7.0 MiB + 1.9 MiB = 8.9 MiB systemd-journald
22.0 MiB + 1.0 MiB = 22.9 MiB devilspie
22.0 MiB + 1.2 MiB = 23.2 MiB tint2
23.1 MiB + 1.8 MiB = 25.0 MiB avant-window-navigator
23.2 MiB + 1.9 MiB = 25.1 MiB pnmixer
24.8 MiB + 2.2 MiB = 26.9 MiB awn-applet
29.9 MiB + 3.2 MiB = 33.1 MiB applet.py
32.4 MiB + 3.8 MiB = 36.2 MiB terminator
56.4 MiB + 834.5 KiB = 57.2 MiB Xorg
67.3 MiB + 3.5 MiB = 70.8 MiB conky (3)
359.9 MiB
=================================
Last edited by morfik (2013-05-06 10:50:30)

Vorbis, you're my savior! It works.
I changed some stuff since then, but I had 90 MiB graphic environment (nouveau). Now I have 129.0 MiB (nvidia) -- it's 40 MiB more, but I can live with that. And of course, it is not 300+ MiB.
Private + Shared = RAM used Program
104.0 KiB + 26.5 KiB = 130.5 KiB gnome-pty-helper
112.0 KiB + 27.0 KiB = 139.0 KiB agetty
176.0 KiB + 19.5 KiB = 195.5 KiB dhcpcd
224.0 KiB + 54.0 KiB = 278.0 KiB rtkit-daemon
232.0 KiB + 122.0 KiB = 354.0 KiB su
288.0 KiB + 68.0 KiB = 356.0 KiB xcompmgr
260.0 KiB + 120.0 KiB = 380.0 KiB openbox-autosta
324.0 KiB + 108.0 KiB = 432.0 KiB dnscrypt-proxy (2)
412.0 KiB + 45.5 KiB = 457.5 KiB hddtemp
388.0 KiB + 80.5 KiB = 468.5 KiB dbus-launch (2)
404.0 KiB + 75.0 KiB = 479.0 KiB systemd-logind
444.0 KiB + 72.5 KiB = 516.5 KiB bluetoothd
432.0 KiB + 155.0 KiB = 587.0 KiB gconfd-2
480.0 KiB + 236.0 KiB = 716.0 KiB gconf-helper
448.0 KiB + 286.0 KiB = 734.0 KiB avahi-daemon (2)
684.0 KiB + 51.5 KiB = 735.5 KiB hamachid
680.0 KiB + 96.5 KiB = 776.5 KiB smartd
764.0 KiB + 112.0 KiB = 876.0 KiB ntpd
4.6 MiB + -3809.0 KiB = 911.0 KiB at-spi2-registryd
676.0 KiB + 267.5 KiB = 943.5 KiB at-spi-bus-launcher
908.0 KiB + 48.5 KiB = 956.5 KiB systemd-udevd
588.0 KiB + 530.0 KiB = 1.1 MiB sh (5)
1.0 MiB + 115.5 KiB = 1.1 MiB xscreensaver
752.0 KiB + 593.0 KiB = 1.3 MiB cups-browsed
944.0 KiB + 477.0 KiB = 1.4 MiB dbus-daemon (4)
1.2 MiB + 596.0 KiB = 1.7 MiB cupsd
1.3 MiB + 537.0 KiB = 1.8 MiB bash (2)
1.2 MiB + 748.0 KiB = 2.0 MiB tint2
5.5 MiB + -3391.5 KiB = 2.1 MiB lightdm (2)
1.7 MiB + 658.5 KiB = 2.3 MiB systemd (2)
3.0 MiB + 667.0 KiB = 3.7 MiB openbox
3.5 MiB + 547.0 KiB = 4.0 MiB pulseaudio
7.7 MiB + -3735.0 KiB = 4.0 MiB polkitd
2.3 MiB + 2.0 MiB = 4.3 MiB pnmixer
4.2 MiB + 1.5 MiB = 5.6 MiB systemd-journald
10.1 MiB + -1668.0 KiB = 8.5 MiB conky (4)
8.5 MiB + 1.2 MiB = 9.7 MiB spacefm
14.7 MiB + 2.2 MiB = 16.8 MiB terminator
50.0 MiB + -3719.5 KiB = 46.3 MiB Xorg
129.0 MiB
=================================
I commented out the following lines:
# --enable-gl
# --enable-egl
I couldn't compile cairo with --enable-egl , so that's why I removed it too.

I updated IOS 6 in my device, it is performing worse. Consuming too much battery in a very short time. How can I "downgrade IOS version?

I updated IOS 6 in my device, it is performing worse. Consuming too much battery in a very short time. How can I "downgrade IOS version?

Downgrading isn't supported and wouldn't help. You need to fix your phone.
1. Delete and reinstall all email accounts.
2, Restore the phone in iTunes, first using a backup and if needed as a new phone.
iTunes: Restoring iOS software

USb cable consuming too much power !

Hi, Dear Sir, I had an issue regarding my Macbook Pro. When i connect my iPhone 5 lightning cable in usb port then it give a massage that" USB devices disabled, usb cable consuming too much power device disbaled. Please give me our best solution. Thanks

Are you using the Apple cord that came with your phone? That could be caused by the cord.

Why "Home & Lock Screen" consume more than 20% battery life in iOS 8.3?

Hi, I also got the battery issue after upgrading to the iOS 8.3.
My battery will drop from 100% to 30% within 4 hour battery usage (you can find this is the data in the Settings->General->Battery Usage->Usage)
When I go to check the battery usage of each app, I see "Home & Lock Screen" use 23% battery within 24 hours.
I just dont understand what does "Home & Lock Screen" do basically, and why it consumed so much battery usage?
Anyone has idea or the similar situation?
I'm using iPhone 5s

Hey guys, I believe it can let you extends your battery life significantly by doing the following.
(I did an experiment by myself in these days)
1. Turn off the hands off
2. Turn off the non-necessary background app refresh
3. Turn off the Suggested Apps, both My Apps and App Store
4. Set the location service for every app into "While Using" if you are able to
By doing the settings above, I can extends my battery life 15% and more.
I am using iPhone5s and iOS8.3

Why do I have so much storage 'other' on my iPhone 5, ios7?

why do I have so much storage 'other' on my iPhone 5, ios7?

Hi: I had the same issue. I believe mine was due to the fact that I always installed software updates over wifi. I believe doing so did not remove the old software from my phone, which then took up space in Other. Here's why I think this.
Yesterday, I had 6.2 GB of Other (on my 16GB iPhone). Got the alert that a software update was available, but didn't have enough free space on my phone to update it over wifi. I plugged my phone into my Mac today and ran the update on iTunes and the Other went down to 2.1 GB. Note, when I previously updated software over wifi, it took about 3 minutes, today when I updated it by actually plugging into iTunes on my Mac, it took about 15 minutes. It cleared everything off my phone and reinstalled it.
I'm not sure if this is the only reason for the Other storage to be high, but if you update over wifi, it could be. Note: if you're not due for an update, you may want to try resetting your phone and doing a restore from iTunes. Be sure to back up your phone before doing this!
Hope this helps.

Hi, My I-phone taking too much time to get charge

Hi, My I-phone taking too much time to get charge... I am charging through computer. It does not show whether its charging or not. Morning it was 40% , till now it 60 % after that it never moved...I have switched off my mobile and charging but percentage has moved to only 60%... I am charging from morning 9:00...its 1:30 still 60%....Please help

If you have the original battery in your iPhone 3G, it may have reached the end of it's useful life. You can contact Apple about a replacement battery. It may also be that the USB port on your computer doesn't put out enough power. Try charging the phone from a wall outlet.

I don't understand why me phone keep saying my phone is disable can I get help please

I need help I don't understand why my phone is telling me its disable and want let me in the App Store I Changed the pass word now what can I do

If you are having store account problems, contact the iTunes/app store staff at http://www.apple.com/emea/support/itunes/contact.html and they can straighten out your account.

Jnlp-launch consumes too much time to operate

Hello all!
I want to discuss the UX we have using jnlp launch in JavaFX.
You can find jira-discussion here:
http://javafx-jira.kenai.com/browse/RT-14930
As you can see, it was recognized as major bug.
What's wrong with jnlp-start?
1. When user launch jnlp-file, red confusing window "Java 7..." appears immediately.
While it can be slightly useful in promotion purposes, but many of today's users will be disturbed. There is no association "Java means cool" today. Users wanted to launch new sexy app, but all they see is strange poster with "Java........."
Imagine pop-up window with "Adobe Flash XX.XXX" for several seconds every time when you try to launch flash game. Is it fine UX you await?
2. I don't know, is it independent issue, or tightly coupled with previous one, but jnlp-start really consumes large amount of time.
On my machine with SSD most JavaFX apps can be launched from jar in less than 1 second.
But launching same app via jnlp take about 4-5 seconds total.
I suppose, it is self-evidently that launch of app with .jar files on disk must consume not much time than direct jar-launch.

Hello,
1) Should there even be a jnlp-start pop-up? Maybe a setting with no web-start pop-up or maybe the developer can provide own image to pop-up?
2) It does seem a little slow. I see that in the jnlp file there are references to external URL's.... could it be that these URL's are being accessed every time the JNLP is launched causing this delay? Is the performance of the jnlp startup tied to the performance of the external site and its network?
thanks
jose

HT4623 Why my phone number is not registered with iMessage?

Hi Mark, I have 2 iphone but about Why my phone number is not registered with iMessage? I try on/off my iphone but i didn't sucessfull

Turn imsg off/on.
If that doesn't work, I would than backup your data (considering the troubleshooting steps already listed) and "Erase all content and settings" on the device and setup as a new iphone and test imsg out in factory default. Try to activate your phone in factory default. If it shows your number / activates, there may be something in your current settings preventing imsg from operating / activating. If it does not activate, get in touch with carrier.
http://support.apple.com/kb/HT4137 <--- Follow this
Restore from backup after troubleshooting this.

HT2101 Why is phone consuming so much of battery

Similar Messages

Maybe you are looking for