HT2173 I have a feeling that my hard drive is on its last legs. it is old and only 150 gig. CAn I replace it and duplicate everything on it??
I have a feeling that my hard drive is on its last legs. it is old and only 150 gig. CAn I replace it and duplicate everything on it??
Your going to need to be able to make a copy of your data.
You may want to consider buying and using an external drive for your daily use.
I believe the g5's have a firewire 800 port.
In case you decide to replace your internal drive.
iMac g5 is SATA 1.0
2.1 SATA revision 1.0 - 1.5 Gbit/s - 150 MB/s
Check to make sure you can reduce the speed to 1.5. Some 6.0 drives have a plugable pin to reduce to 3.0 then auto negotiate from 3 to 1.5.
You can buy a dongle for 15 to 20 dollars to temporarily attach a harddrive to your system.
You need an external Firewire drive to boot a PowerPC Mac computer [ a few G5's will boot from USB ].
I recommend you do a google search on any external harddrive you are looking at.
I bought a low cost external drive enclosure. When I started having trouble with it, I did a google search and found a lot of complaints about the drive enclosure. I ended up buying a new drive enclosure. On my second go around, I decided to buy a drive enclosure with a good history of working with Macs. The chip set seems to be the key ingredient. The Oxford line of chips seems to be good. I got the Oxford 911.
I'd give OWC a call. 1-815-338-8685.
FireWire 800 + USB 3, + eSATA
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
(2) FireWire 800/400 Ports (Up to 100MB/s / 50MB/s)
(1) USB 3.0 Port (Up to 500MB/s / 60MB/s)
(1) eSATA Port (Up to 300MB/s)
Has a combo firewire 800/400 port. Not sure what this is. Looks like you will need 400 cable.
http://eshop.macsales.com/shop/ministack
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!
Give SuperDuper a workout on your own system. Clone to your heart's content — for free. See what else is possible. When you're convinced that SuperDuper is a terrific solution — and a great value at $27.95 — you can register right from the application and start using its advanced features immediately!
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
To boot from the external drive, hold down the option key when you poweron your system. Pick the drive you want.
Similar Messages
-
I'm replacing a bad hard drive on my imac. It was a 500GB Seagate 7200.12. Can I replace it with a 1TB Seagate 7200.14 HDD??
Yes of course.
-
I purchased a macbook air about 5 months ago and lately i keep recieving a warning that the hard drive or disk is full and that I will need to move items to trash in order to free up space on it. I purchased a external hard drive 1 TB but I'm very new to mac and ios and unsure as to how I'm suppose to transfer my files (video, pics, music etc.) from my mac over to the external hard drive in the correct way so I won't end up deleting them permenately or screwing anything up with my mac as far as the applications and programs being able to run. Am I supposed to just copy to the external hard drive and then move to and empty the trash? That's pretty much all I could come up with, but then what if i need or want to access that file again at a later time. Also, I have an i Phone and i pad so with i cloud it automatically syncs all my purcheses and if i delete something from itunes on my mac it deletes from my ipad.
I'd appreciate any kind of input i think im just a little lost here. I have to say i love my Mac and wouldn't trade it for anything (except maybe a macbook pro w/more memory)... Is there something I'm missing???To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit. -
I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?
Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html -
I have erased everything buit that didn't work, I have tried to reinstall from the apple disk so...I am thinking it is time for a new hard drive( I think, but not sure) where do I get one and if I sdo will it help the problem?
Thanks
sssail3 at aol dot comDid you try zeroing the Drve before installing?
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to install.
Here's some new Hard Drives for PBs...
http://eshop.macsales.com/Search/Search.cfm?Ne=8050&Ntt=2.5+hard+drive&Ntk=Prima ry&Ns=P_Price|0&N=6885+4294967075
To see how it's replaced, go here and choose your PB and click on the Hard Drive link...
http://eshop.macsales.com/installvideos/ -
Is there an application where I can back up all my info that I have on my computer so I don't have to buy a external hard drive?
Yes, but off-site storage (i.e. Mozy) is more expensive in the long-run than an external drive, however, off-site storage is safer (not sure if I trust the security though), and even with a fast connection, the inital backup can take days
-
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive. -
I have a Western Digital external hard drive that needs to be re formatted for use on my iMac, but I do not want to lose existing data, is this possible ?
Formatting a disk always erases all the data on it. Your only option is to back it up elsewhere and restore it once formatted.
-
I have an attachment to my iPod Classic that allows me to record. However, when the hard drive died on my last computer I lost the software that allowed me to transfer files for burning CD's or email, etc. I don't remember have an attachment to my iPod Classic that allows me to record. However, when the hard drive died on my last computer I lost the software that allowed me to transfer files for burning CD's or email, etc. I don't remember where I got the software and the package with the instructions is long gone. Anyone know where to get it?
What is the make and model of this recorder? Do you have that information available?
You can still use iTunes to transfer and manage your recorded audio.
iPod: Recording voice memos
B-rock -
What else can I do. All of itunes should be on the external hard drive. I think 3TB is plenty of space. Could it be my iphoto? I moved all those to the external hard drive too.
lllaass wrote:
Yes, you should format the HD.
A Mac can natively write to a NTSF drive and that is what most drives com formatted with.
You should use the Mac journaled format.
Once again you are posting incorrect information
Until we know what format the drive is it is impossible to state that it must be formatted - that is just a guess
And a Mac can not Natively write to an NTSF drive - it can natively read it but can not write to it with special software
And since formatting a drive erases it it is critical to tell users not to format until they have a positively known good backup
The TOU for these forum state that you should test your answers prior to posting them -- you obviously are not doing that and you advice is endangering users photos - please only post tested answers
LN -
Time Machine. Each time I wake up my Mac. it says that I did not eject the disk properly. Do I have to eject the external hard drive each time I put the Mac. to sleep?
If you do eject or disconnect that external drive before sleep, do you ever get that message?
Some Drives & chipsets will not work right with sleep, what brand/model is it? -
I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?
ok. I do have a time capsule but if I move itunes on to it how do I sync my ipods and iphone? Or can I have my Itunes account on both and just move my movies to the time capsule?
-
Hello, All,
I have a FAT 32 External Hard Drive marked as Read Only that is unchangeable by an administrator or root user, how can I make it read/Write without reformatting it ?Hi Kappy,
Just wondering if you had any advice for my situation . . .
My time machine backup was backing up to a drive that was "Mac OS X Enteded Journaled, Case Sensitive." I had no idea what this meant, or that it would even cause issues.
I took my computer to the Apple store yesterday, and they wiped it clean. When they tried to restore it from the Time Machine backup drive, it would not work. Their guess is that Time Machine cannot restore from a drive that is "case sensitive."
Any thoughts on how I can convert my time machine backup data from a "case sensitive" state, to a "non-case sensitive" state? I've tried to just drag and drop the files from the case sensitive formatted drive to a new drive that I have that is formatted non case sensitive, but I get the following error message:
"The volume has the wrong case sensitivity for a backup"
I just really want my data back - I thought TimeMachine was the way to go (and was supposed to work) but unfortunately it is not.
Any help you can provide would be greatly appreciated.
Thanks, -
Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?
If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
I have Lion on an external hard-drive and I want to install it on the internal disk
I have Lion on an external hard-drive and I want to install it on the internal disk. How can I proceed?
I recently completed a clean install of Lion on an internal SSD. After wiping it clean, I used a thumb drive with SL on it to boot and then another thumb drive with Lion on it. It worked just fine. The only thing to be aware of is that if you use the thumb to install Lion from... it will not install a recovery partition and you'll have to use the thumb in the future.
That's what I wanted anyway so it's working out just fine. Good luck.
I should add... I used the SL thumb to actually boot from and used Disk Utlities to wipe the internal SSD. It does work and there are Apple posts that can guide you through the thumb drive process. I used copycat to create both the SL boot and Lion.
Maybe you are looking for
-
System Preferences shuts down when trying to apply .CR2 image as background
Hello- I have been trying to apply a photograph taken in RAW as a desktop background image. The file is .CR2 and when I click done to set it as the background, the background does not change and the notice comes up that System Preferences has unexpec
-
Hey everyone, Do you think that this is a great idea? i think that apple should make the volume button on the iphone double as a shutter button for the camera. i really hate having to tap the screen when im taking a photo. this just make sense to me,
-
Items released automatically first come basis
We are using FIFO method in SAP 2005B. I need to release the open items automatically first come first basis and don't allow to select the newly arrived items when the old one exists. Those who have an answer give me a solution immediately.
-
HT204053 Change of email causing iCloud problem
I have changed my email address for my apple ID and want to change my iCloud ID to the same and keep all my information! Is this possible because it wants to delete all my calendars and contacts??
-
Hi I am deploying an application with MDB using Oracle JMS( AQ ) and durable subscriptions. Now for configuration of the topics, I have a doubt. In addition to creation of the topics in the db do I have to specify those in jms.xml or it is required o