HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device.  phone no good without a home button

The button's broken.  S**t happens.  Apple will replace your phone.  If in waranty it will be free of charge.  If not, you will pay $149. 
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

Similar Messages

  • Standby button no longer works after upgraded OS from 4.... to 5.0.0.484

    Hi all.  I am new to BB and have a Tour 9630.  After "upgrading" my OS yesterday the former "standby" (mute) button no longer works.  I tried to find a place to assign "standby" mode to the left or right shortcut key but no luck.  Also, I noticed my Opera browser is significantly different (and more annoying) because clicking the trackball goes back....  Any thoughts on either issue would be appreciated.  Thanks.

    Ok, so apparently I haven't looked at my phone too closely. The old Pearl model only had one button up top, which you used for both mute and standby. The new Tour apparently has two- the one on the right is the mute and the one on on the left is the lock.
    On the Pearl you could press * to lock and *+[Green talk button] to unlock. On the Tour the only option you have to unlock is to press the lock/unlock button on the top left. It's pretty clear when you look at the top of the phone. However I usually have mine in a silicone case, which does have markings but they're very hard to make out.
    So the phone locks and unlocks just fine, even after the OS 5.0 upgrade. However, I'm still wary about getting rid of standby mode if, in fact, it is a battery-saver. (Which I'm pretty sure it is)
    Bring back standby mode, Blackberry!!

  • Why are the back/forwards buttons no longer working after upgrade?

    Hi, I recently upgraded from Firefox 3.5 (I believe) to Firefox 4.0.1 and now the back and forwards buttons no longer work. I tried resetting the settings under the toolbars > customize, etc. That didn't work. FYI, I'm using a mac. Any solutions? Thanks in advance...

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • IPhone 4 home button doesn't work after upgrading to IOS 7

    After upgrading to IOS 7 today, my home button stopped working. Just curious if anyone has experienced this? It worked at for a few hours, then all the sudden it stopped. Maybe it just randomly broke. I've never had an issue before today. Thanks for the help.

    Well, it just, randomly, started working. I didn't do anything.

  • The back button does not work consistently, and rarely works if I open an attachment...any ideas on fixing this?

    The back button does not work consistently, and rarely if ever when I open an attachment. Does anyone have a fix for this?
    == This happened ==
    Not sure how often
    == I installed firefox

    Same problem here: I never had a problem with the previous versions and now I don't even get my homepage when I click Firefox. Instead, I am getting a blank screen that says "New Tab", only after I click the "Home" symbol I get my Homepage (Yahoo). The browser - back and browser forward button don't work anymore, very annoying. Normally a newer version should be an improvement but it looks like Mozilla really messed up with this "improvement". probably I am going to use Google chrome from now on.

  • The audio in "speak screen" stops working after a few uses. IOS 8.2 did not fix this problem unfortunately. I'm using the Alex voice on a Sprint iPhone 6 plus- if that matters.

    I really enjoy the speak screen feature, as the voiceover is too inconvenient and tricky to use. The speak screen option works oerfectly for reading, and helps me as I'm dyslexic. However, the Alex voice stops working after the initial use or soon after. I then have to restart the phone every time in order to get the speak screen to acruelly speak again. Really annoying and was hoping that IOS 8.2 Would fix this, but it appears it had not fixed this bug. Any help with this?

    Any problem when connected to another wi-fi network besides your own?
    The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
    If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

  • Upgraded to OS 6.1.2 on iphone 5 and my home button no longer works. Any advise welcome please

    I upgraded to )S 6.1.2 on my iphone 5 and my home button no longer works,
    Is there a fix for this ? Has anyone else been impacted ?
    Thanks

    Thanks for the reply.  Very weird that this happened post the upgrade. Had no problems till now.  Thanks

  • Back to my mac no longer works after upgrading to Lion

    Back to my Mac no longer works after upgrading to Lion
    After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
    Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

    OK, so further investigation has addressed the BTMM issue on a remote machine.
    With all machines running lion, I was having issues trying to log in to a standard user headless machine already running.  In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login.  Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions.  This means you can admin the remote computer without bothering the remote user.
    The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login.  I applied a similar solution to a problem that was related to screen sharing I found on this board.  What I believe to be the fix is to add the standard user to the screen sharing user list.  Then screen share to the remote account using the standard user credentials. 
    So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access.  Previously I only had admins.  This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
    Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • IPhoto no longer work after upgrading to Mavericks.

    My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

    kmg55 wrote:
    Just upgraded and Iphoto will not work,
    Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
    If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

  • My ipod touch 4th generation keeps lagging, all the apps crash, nothing will update and my home button no longer works?

    my ipod touch will not stop crashing, its pretty much un usable now, is it worth resetting to default settings and clearing everything. Its about two years old and the screens been smashed twice and replaced, the home button no longer works, and now its slow and basically nothing even opens or updates. is it the end of my ipods life now ahah.

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. You can't do it
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.

  • Script no longer works after Upgrade to 10.4.6

    The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
    When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
    When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
    Anyone else having Applescript problems with 10.4.6?
    --Bob
    tell application "Finder"
    activate
    set fname to selection as string
    if fname contains "0." then
    move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "1." then
    move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "2." then
    move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "3." then
    move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "4." then
    move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "5." then
    move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "6." then
    move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "7." then
    move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "8." then
    move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "9." then
    move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end tell

    I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
    First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
    What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
    I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
    It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
    Jeff Johnson
    Dual 1.2 GHz   Mac OS X (10.4.6)  
    Dual 1.2 GHz    

  • I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

    I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

    There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
    When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

  • On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

    On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
    They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
    do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
    I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
    Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

    Hi,
    When you start Messages fro the first time you are asked for an Apple ID
    When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
    The App should have also picked on on those iChat Accounst you had before.
    These should be Enabled if they were when you last used iChat.
    Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
    In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
    Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
    This will give you separate iChat type Buddy lists.
    You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
    You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
    I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
    There is no Buddy list for iMessages side
    No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
    Obviously an Apple ID can be an email or look like one.
    In some cases they are also valid AIM Screen Names as well.
    In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
    11:31 PM      Saturday; August 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Microphone no longer works after upgrade to windows 8.1

    After upgrade to windows 8.1 my internal microphone no longer works.
    I tried installing updates suggested in other posts with similar driver problems but they did not work.
    HPSupportSolutionsFramework-en-11.51.0048 did not work.
    My internal microphone is IDT High Definition Audio Codec
    When I go through the control panel  and look at it - it shows a status of "not plugged in"
    Please help 
    thanks

    OK I am a little confused.
    There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
    However I just received the following email from you:
    Hello gordml,
    The questions you posted on the HP Support Forum recently received one or more answers.
    Question: Microphone no longer works after upgrade to windows 8.1
    Date: Sun Dec 21 01:01:56 PST 2014
    View the answer(s).
    Did this reply resolve your post or question?
    If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
    You can also show your appreciation by giving kudos.
    We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
    Thanks for being a member!
    The HP Support Forum Team"
    Why would this be sent to me if there has been no recent replies on this issue?

Maybe you are looking for