HT2213 I am unable to get this to work. Anyone have success on this?

I recently had a firmware update go bad on me. I did as it said and it flashed the led and beeped once and the screen remained black. After a long time with nothing happening I shut it down and tried again but this time got the 3 quick 3 long 3 quick beeps/flashes. I downloaded the firmware restoration cd and I am unable to get the cd to work. My mac is a macbook core duo and I have both the restoration cds 1.3 and 1.4. Neither work. I would appreciate any help.

Never mind. I found out that there isnt a disk for this model yet.

Similar Messages

PLEASE HELP ME??? Lost itunes trying to downgrade back from 11.0 & unable to get itunes to work at all now..

New Itunes setup is the worst one yet!!! I couldn't stand it, so I tried uninstalling it and reinstalling older versions, but now I am unable to get it to work in any version. I have uninstalled & reinstalled several times (trying this with multiple versions). Strange thing is that ever since I uninstalled 11.0 I have not been able to get any of the other versions to open at all.. Sometimes an error message box dings & pops up that says something about how to adjust the volume through your itunes, or unable to open file.. other times when I click on the icon it just does absolutely nothing. WILL SOMEONE PLEASE HELP ME??? I'm going crazy without my music & I am panicking because I am afraid I may have lost all music (I have thousands & thousands of songs on there).. I'm hoping to find a way to reinstall an older version, but at this point if I can't find a way to bring back the old version, I'll take 11.0 if I absolutely have to (meaning if it's the only way to retrieve itunes without losing my entire library)

Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.

Unable to get following example working

http://java.sun.com/products/jlf/ed2/samcode/textme1.html
i am unable to get this example of file menus working.
i have created a new project in JBuilder called TextMenu.jpx
i have altered the project properties to look for TextMenu as the main method but it gives me a compilation error:
"java.lang.NoClassDefFoundError: TextMenu
Exception in thread "main" "
can anyone else get this example working???

Hi there,
OK So its been two years since the last reply to this thread, but just incase anyone else out there is having problems with getting this example working in JBuilder here is how we did it.
First off remove the "package samples;" line from the top of the .java file
then locate the following line
resources = ResourceBundle.getBundle( "samples.resources.bundles.TextMenuResources", locale);
and change the part in the quotes to just "TextMenuResources".
Finally open the samples.jar file and extract the file "TextMenuResources.properties" to the class folder of the project you are working on (for example if your project was called "TextMenu" then locate the "\TextMenu\class" folder and extract the file to there).
Then compile the .java file in jbuilder and it runs, hopefully.
I'm guessing there are easier ways to achieve a working state, but i had to get this working on a college computer with a variety of security precautions in place (including no command prompt, and no control panel which makes altering the classpath environment variable hard unfortunately).
Hope that this helps someone.
Sheepy / Andy

Unable to get Phone Dialer working

Hello everyone,
I have setup a brand new client. And I am unable to get the dialer working correctly.
I have followed the directions here: Re: The Top10 most frequently asked questions and answers (FAQ) January 2009
- Telephony service is started
- Windows XP Phone and Modem settings correctly configured
- Phone Dialer does work and does show the progress of the "manual" test call
- Phone Dialer is running and minimized
- SAP/b1 General Settings/Service is setup with an area code.. nothing needed for an outside line
When I pull up a Business Partner and hover over a phone number, I hit CTRL+TAB and nothing happens... the next field is just highlighted and no dialing occurs.
Any thoughts as to what I'm missing to get this working correctly?
All input is welcome.
Thanks!
~ terry o.

Finally got this working. Please setup your dialer using these directions;
- Telephony service is started
- Windows Phone and Modem settings correctly configured with any required settings like area code or country
- Run Phone Dialer (dialer.exe) and confirm it does work and does show the progress of a "manual" test call
- Change SAP/b1 General Settings/"Service" is setup with an area code.. and outside line requirements
Open SAP/b1 and hover your cursor over a phone number. When the "phone" icon is displayed, press "CTRL + double-click".
The dialer should open and you should see the progres of your call.
Good luck!
~ terry o.

Currently working on OpenSPARC. Unable to get ModelSim for working on Linux

We are working on OpenSPARC. We need to get ModelSim to compile the code in Verilog. We are unable to get ModelSim to work on Fedora Linux Version 9, as ModelSim only works on Windows.Is there a way to get Modelsim for Fedora Linux version 9.
Regards,
K.Pradheep Kumar
19.08.08

They have a Modelsim LE version for Linux. Check this out:
http://www.model.com/products/default.asp

I am also unable to get the 551L working with Windows 8 Beta 1. Any advice?

I am also unable to get the 551L working with Windows 8 Beta 1 and Mac OS X 10.8 Mountain Lion Developer Preview 2. Any Advice?

It should be noted that I was previously in those Windows Beta's and I am also a member of both Microsoft Technet (Retail Subscription), and all 3 Apple Developer Programs (IOS, Mac and Safari), which is the reason why I am running Microsoft Windows 8 Beta 1 on 2 of my 3 Dell's (the oldest one has Microsoft Windows XP Service Pack 3 and Microsoft Office 2003 on it, which is the PC that I am using the 551L on), and the Mid Year 2010 Apple Mac Mini has Mac OS X 10.8 Mountain Lion Server Edition on it (something that I am technically am NOT supposed to be talking about here due to my NDA so this will be the last time I mention it here (as you can see I am known for being the type of Computer Nerd that loves Alpha and Beta Testing)! :-)

I am unable to get quicktime to work in IE10

I am unable to get quicktime to work in IE10 each time it just redirects me to the quicktime download, I've uninstalled and reinstalled quicktime, I've done a reset on IE, tried unchecking ActiveX filtering...Any other ideas?

I'm working my way through Dreamweaver CC Classroom in a Book. The template in the exercise I'm trying to complete has sections that you can edit and those that you cannot. The links involved are to buttons in the non-editable sections. Since they're non-editable, you can't employ Property Inspector to alter content in those sections. I surmise that the through the Assets Panel approach is supposed to give you the capacity to add hyperlinks to those sections. Double clicking the template does not give you access to those non-editable sections. I've tried that along with a number of other circumventing the Assets Panel approaches. I've dug up a verson of the template from an earlier exercise that doesn't have any non-editable sections and the Property Inspector works fine. With some fumbling aboutI 'm sure I could go right to the code as well.
Ultimately, I don't think I'll have any difficulty with my project working around the Assets Panel. The deal is... it's supposed to work... and it doesn't. And being blown off by support really ticks me off. I'm sure yoou understand.
Thanks for your time and effort on my behaf. Being a really stubborn son of a *****... I'll probably keep after this until I get an answer... whether I ever need to use the Assets Panel or not.
Thanks again.

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

I am unable to get my bluetooth working message says "make sure car mutli media is in range" how do I get connected?

I am unable to get my bluetooth working on my phone. the message says "make sure car mutli media is in range" how do I get connected and what does that mean?

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

When I try to install PSE11, I keep getting error 1935, does anyone have a solution for this problem

When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
this problem?

This thread from the Premiere Elements forum may help:
http://forums.adobe.com/thread/1286807?tstart=0

How do I get endnote to work, I have downloaded the plugin but still not available, How do I get endnote to work, I have downloaded the plugin but still not available

Trying to get endnote to work, I have downloaded the required plugin from Apple website but I still can't open endnote or create a list of references etc. I notice on the webpage it says endnote is sold seperately? Can anybody help with this issue?

You have to buy the EndNote application. http://www.endnote.com/
Or are you having problem just to add endnotes or footnotes. Read about it on pages 55-59 in the Pages User Guide. It is downloadable from your Pages Help menu.

My new (2 months old) 5s fingerprint recognition sensor does not work. It worked well when I first got it but now to get it to work I have to redo my fingerprints every few days, which completely negates the convenience and cost of the phone.

My new (2 months old) 5s fingerprint recognition sensor does not work. It worked well when I first got it but now to get it to work I have to redo my fingerprints every few days, which completely negates the convenience and cost of the phone. I have tried all the tips and they help a little but it always stops working and I have to redo my fingerprints. Does Apple read these comments? Is there an app that might help?

Apple does not read here.
If you want Apple to know send feedback
http://www.apple.com/feedback/iphone.html
I also have iPhone 5s on day one and it's working since. When it's not registering, I just clean the Home button and it works straight away.
Did you try when registering fingerprint using all angles? It should learn the more you use it.
Did you clean the sensor with a soft cloth?
http://support.apple.com/kb/HT5883

Ive been tryingto find a way to get the answers to my sercurity questions but non of the ways work anyone hav a solution thats not on the apple support page

Ive been tryingto find a way to get the answers to my sercurity questions but non of the ways work anyone hav a solution thats not on the apple support page

Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312

BT Yahoo Toolbar - I am unable to get this to open, using Vista, however, have succesfully got it to show on my laptop with XP, using v3.6.8 of Firefox.

I am using Mozilla Firefox v3.6.8 with XP on my laptop and Vista on my desk top. I was asked by BT Yahoo to download the new BT Yahoo Toolbar. This I achieved on my laptop with XP, but have been unable to get the toolbar to show on my desktop using Vista. The file downloads and fails to create the toolbar.

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

HT2213 I am unable to get this to work. Anyone have success on this?

Similar Messages

Maybe you are looking for