HT2292 After the Itunes update my ipod nano is not being recognised by the computer or Itunes.
It says and ipod has been detected but it could not be identified properly. I have tried all the solutions on the website but nothing is working since the update
I have tried all the solutions on the website but nothing is working since the update
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Similar Messages
-
N20 snowfox (4A0432)
Voltage: 3254 mV
The above message is showing on my nano screen and it's not being recognized by my computer or itunes. What do I do?just hold down the “-” button and the power button. when it says “ok to disconnect” hold down the powerbutton and the “-” button again.
copied from iPod nano 6G diagnostic mode -
My ipod nano 6th generation is not showing up when I plug it into the computer. I have reset it and restarted the computer, I also have downloaded latest itunes. My other ipod nano shows up so I know its not the cord or computer. It is not showing up in itunes either.
That seems to be a clear indication of an issue with your iPod and not your PC or USB cable. Have you tried resetting the Nano with it still connected to your PC?
How to reset iPod
Does the iPod still charge when you have it plugged in?
B-rock -
HT1494 My old iPod nano is not being recognized by my computer.
I recently lost my iPod touch so I am trying to move my music to my old nano. However, the new iTunes does not recognize it and also says I have only 1 device registered to my Apple ID... I have tried different USB ports, resetting my iPod, charging it, disc mode, updating iTunes, and resetting my computer, but nothing works. Any ideas?
Try the following and then try a restore:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Placing the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Placing in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My brand new Ipod Nano is not being recognised on itunes and i cannot download music onto it.
\i changed to the new itunes and now there is nothing on the screen other than the music ie no options.
help please!Try a different cable. And are you connecting directly to your computer or through a USB hub?
-
My ipod nano is not being recognized by my laptop
dear apple community users,
when i connect my ipod nano to my lapto (hp) it shows the charging sign but it is not recognized by the laptop.
i have tried turning it on and off may times but has not helped
i have the latest version of itunes on the laptop but due to this problem i am not able to sync the music files from the laptop
plss help and reply asapGood Morning lavanyaroy,
If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
http://support.apple.com/en-us/HT204095
All the best,
Judy -
My ipod nano is not being recognized by any power source:(
My computer and power cord for electrical outlet is not causing any response from my ipod
Good Morning lavanyaroy,
If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
http://support.apple.com/en-us/HT204095
All the best,
Judy -
My ipod nano is not being recognized in iTunes or in Windows, it only shows up as a USB and when i plug it in it says 'do not disconnect'
This happened after I put the ipod nano in Philips Ipod speakers.
I've reset the ipod mulitple times, uninstalled and reinstalled itunes, restarted my computer, and I can't restore the ipod because it doesnt register on my computer and it doesn't show up in itunes, but for some reason it still says dont disconnect.
What should I do??just hold down the “-” button and the power button. when it says “ok to disconnect” hold down the powerbutton and the “-” button again.
copied from iPod nano 6G diagnostic mode -
I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?
rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer -
Help - I am stuck in Afghanistan on operations and my iPad mini has died.
I tried to update the IOS as directed, there were a few error messages and I cancelled the process.
The ipad now only shows the connect to itunes screen and is not being recognised by the computer in either windows or itunes.
I have tried several resets and restarted the computer and reinstalled itunes.
Is there anything else I can do.
This is my only method of talking back to my family at the moment and is really quite important.
JSThanks, I will give it a go. Will it work on my computer after I do that?
Jez -
My 3rd gen iPod nano is not being read by my iTunes on my mac. When going to sync, the mac screen says "no name". Also I believe I lost all the music on the iPod. When turned on it says "Welcome" as if it is new. I tried to copy all my music into the "no name" folder and then sync. The iPod said it was "syncing".
So does iTunes see the iPod or not? I couldn't quite understand from your post as you said it wasn't, but then said that the iPod was syncing...
B-rock -
My ipod nano, 4th generation, is not being recognized by my computer or itunes
my ipod nano, 4th generation, is not being recognized by my computer or itunes, what do i do? I've tried using different cords, but nothing will pick it up.
I am experiencing the same issue. I have Mavericks with updated iTunes, reset both, not detected
-
HT1369 The screen on my Ipod Nano will not turn on?
The screen on my Ipod Nano will not turn on.
my iPod nano 7th generation dose not turn on even when its fully charged I've held down the home and the power of button for about 20 seconds but still nothing I brought this 22nd of February 2014 somebody please help
-
My iPod shuffle is not being recognized by my computer. It is flashing orange and when plugged in with the original USB cable nothing happens to show the computer recognizes it.
Flashing orange usually means it is being recognized by the computer. The flashing means do not disconnected, because the shuffle's "disk" is mounted.
In iTunes (with the shuffle connected), when you look in the sidebar (left side of window), under DEVICES, the iPod is not shown there? Does it say DEVICES in the sidebar? -
My 4th generation ipod touch is not being recognized on my computer ?
My 4th generation ipod touch is not being recognized on my computer what do i do ?
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem
Maybe you are looking for
-
How can I stop tabs from "constantly" "reloading" themselves?
Starting with the Firefox 4 update, tabs appear to keep repeatedly "reloading" themselves somewhat, bogging down my computer quickly when several tabs are open. How can I disable the tabs from "constantly" (or very frequently) "reloading" themselves?
-
Start Condition for CRM Actions
Hi, we have a requirement to create the follow up document (complaint) in CRM for the Return orders created in ECC system and not for the return orders created in CRM system. We have configured an action for the same and the follow up document is get
-
U00EFu00BBu00BF -these chars why they are appearing the inbound message step in moni
when i am testing the file-to-proxy scenario, by placing a proper xml file in the outbound directory, it is failing in the xml-validation step. in the moni, when i see the payload of the the Inbound Message step, i see <?xml version="1.0" encoding
-
Hi Experts, I need help on the following two scenarios , and wanted to know if some one can help me with the code or if this can be done through PI standard functions a) File to IDOC scenario - where in the File the first 6 characters of a line item
-
Publishing Enterprise Services
Hi, folks i have to search in all EHP if there es an SAP enterprise service that works just like an SAP MM ERP transaction. I have a list of all MM trx and i don´t know where to search. if they exist, is there an easy way to search those enterprise