HT2292 I am do update follow screen but when it appear error everything gone and my iPhone stuck not working any more.
Yes I do update as screen shot pop up but I meet trouble now.
Please help me my phone IME 013418007959678.
Sorry, but as you already wrote, you should have never done this, and Apple will not service the phone anymore after you have opened the phone.
Your only chance would be finding a 3rd party repair service that can fix that for you. And we can't help you either, due to the Terms of Use in these discussions.
Good Luck anyway.
Similar Messages
-
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopelessIf you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.
-
I updated my iPhone 4S to the new IOS 6 I like it but the problem I found the Wifi button it's not working any more it looks hidden , so what I should do to solve this issue ASAP
Tap Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore Firmware with iTunes on computer. See if fixed. If not, all iPhone 4S have Warranty, make Genius reservation and take iPhone to Apple for resolution.
-
my iphon 4s got problem when i was updating it and screen become black and there is a usb & itone icon on it it dose not work any more ..any feedback about this guys?
Connect it to iTunes and restore it.
-
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns. -
i updated my ipad 3 to latest version of system upgrade and now it is not working. All black screen with Itunes logo. I tried restarting
Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard. -
My Home Sharing does not work any more after latest iTunes update
After iTunes update to 11.1.3 my Home Sharing does not work any more!
It worked just fine for several years...
I tryed to do everything I could find on Apple support... NOTHING works.
Most of Apple so called updates turn out real crap...
I am wondering whats happening to Apple?...Hello igor_rena,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Best of luck,
Mario -
I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail. It looks like it's working ok; but when I hit Send nothing happens and the program stops responding. Any suggestions?
I have starter 3.0 and cannot share pictures via outlook express. Evidently that version is discontinued and my outlook express does not support the MAPI that is required. I think the only solution is to upgrade to photoshop
elements or to send photos as attachment to your e-mail. I have the same problem using Zoom Browser EX sending photos via internet. I spent a whole day trying to resove this issue and have exhausted all options. Just like "Instant share" in HP image Zone that was replace by photoshop album starter 3.0 and now it is out dated. -
I updated to ios 7.1 on Thursday. My ipad basically does not work any more. I am running around in circles on this site and on other "forums" trying to fix. ??? Don't have time for this.....Any advice appreciated.
give us more to work with in terms of info then "basically does not work any more"
it can be from it's on fire to the a key on the onscreen keyboard don't respond -
Operating Problem with CS5.1 extended. I replaced my old HP Laptop with a new Lenovo laptop with Win 8.1 and reinstalled CS5.1 64-bit version. The software downloaded and installed correctly and worked for a day, but when I rebooted the next day, the Image Adjustments and tools functions did not respond any more. I have uninstalled and redownloaded/ reinstalled without success.
Notebook Info
1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
8192 MB DDR3-RAM
Harddisk: 1000GB SATA
NVIDIA N15V-GM mit 1GB DDR3
Prefs
As per download settings, I changed nothing
Image Info
Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
I then downloaded and installed on my PC and everything works.
Regards Roland -
My digital editions saying not working but I uninstalled and reinstalled and it is still not working, any ideas?
Hi imtheozzman, check if your security software is the problem, see : [https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet ]
thank you -
I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can reset it?
You can't reset it. If you don't konw the password then you can't use that backup
-
I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?
Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??
-
my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???
Try an SMC Reset. (System Management Controller)
Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
Also try a PRAM Reset. (Parameter RAM)
Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
If this doesn't do it, run the Hardware Test in Extended
http://support.apple.com/kb/ht1509
Maybe you are looking for
-
Can not insert null into foreign key issue
Hi , I am having parent-child relationship table. In the child table when I am adding a new record , data is getting inserted with foreign key. After insert if I immediately update the same record. Its giving error that can not insert null into forei
-
Running mplayer at boot with systemctl. fails with alsa-lib error
I am running Arch ARM on a raspberry pi and would like to use it as a headless music player. I am trying to run mplayer in slave mode at start up and have in read from a fifo pipe which I could write to over SSH. I have written this mplayer.service f
-
When-validate-item firing on block level.
Hi all i have six fields and when-validate-item trigger is working on block level, i want to display records in one field,i want when-validate-item trigger work on item level not on block level,any help will be greatly appreciated. here is the code.
-
Keep getting popup that says "Firefox requires that you type your Kerberos password"
While using Firefox, a window will start popping up asking me to type in my Kerberos password. The fields they give are for Name, Realm and Password. Does anyone know how to make this stop? If I keep clicking "Cancel," it will eventually stop popping
-
I downloaded iTunes 11 but want to keep format of iTunes 10
This new format of iTunes annoys me i wish i could go back to the old one.....-_- if anyone know how to change it, it would make me happy.