HT2293 Do i need nike+ sensor with iPod nano 6.generation?

Do i need nike+ sensor with iPod nano 6.generation?

According to this page: http://www.apple.com/ipodnano/features.html
Track your walk. Or your run.
The built-in accelerometer in iPod nano gives you real-time feedback on your workout, and you can upload data to the Nike+ website. There’s no need to connect a receiver or use a shoe sensor to track your steps, distance, pace, and time. Just clip on iPod nano and go. In the gym, connect iPod nano to a Nike + iPod compatible cardio machine to keep track of every workout. Back at your computer, upload all your data to the Nike+ website to create personal goals, check your progress, and challenge your friends to top your results.Learn more about Nike + iPod
B-rock

Similar Messages

  • Do I need nike plus sensor with iPod Nano 7h generation?

    I want to buy a iPod Nano just for the nike + support and logging my daily runs. is it mandatory to have the sensor in the shoe?

    No, it's not. Neither the 6th nor 7th generation nano needs the sensor. I have the 7th generation and use the running app all the time. Have never used the sensor. Do expect to need to calibrate the app from time to time, as it will be off, distance wise.

  • My iPod's OFF/On switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

    My iPod's OFF/ON switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

    You can do an out-of-warranty replacement at an Apple Store for a fee, get a 3rd party site to repair it, sell it for parts, or get a new one.

  • Has the Nike+ sync with iPod Nano 5th gen been fixed?

    Some months ago I had problems syncronising my pedometer walks from my iPod Nano 5th generation to the Nike+ website via iTunes. I then had read that many people were having the same problems. It would seem like if it had syncronised, but then you would see '0' on your fuel. It had been said that the problem would be fixed by late Autumn/Fall. Has this been fixed?
    Thanks in advance for your kind reply.

    From http://support-en-us.nikeplus.com/app/answers/detail/a_id/36812/p/3169,3171
    "At this time, pedometer workouts cannot be uploaded to nikeplus.com through iTunes. Depending on your specific configuration (iPod nano generation, iTunes version, etc.), you may receive either an error message or no response if you attempt to upload pedometer data.
    The Nike+ team may create an upload option for iPod nano pedometer users in the future. We appreciate your patience as we work to implement this option, and we encourage you to keep tracking your steps in the meantime."

  • Issue with Ipod Nano 6th Generation

    Hi,
    I am currently living in Japan and managed to get an iPod nano 6th generation at the Apple Store in Shibuya. However, there are a few things that I am curious as to whether or not other users are experiencing. First, my songs are set to shuffle, and sometimes when I hit next song it will shuffle through 3 or 4 (my shake to shuffle feature is OFF). Once it gets to the song, it might show one songs cover but play a different song. Also, if a song is playing and I blank out the screen, the next song will sometimes play, but sometimes it won't at all. When I wake up the screen it appears as if the next song should be playing but it isn't. So far, this has been a little disappointing. Does this sound like a problem with the software and are others experiencing anything like this? Thanks in advance!

    What you are describing sounds like tracks that have been put on your nano that are not authorized to play them.
    First, go to itunes and sort your music by "Kind" if this column is not showing, right click and select the kind column to show up. Sort by this column and scroll down, you will most likely see some music where the kind is "Protected AAC" or something like that. If you look on your nano, you will see that the tracks that are not playing are the ones where their kind is "Protected AAC".
    If this all ends up being right, you need to reauthorize your computer to play your music. Connect your ipod, then in itunes select 'Store>Deauthorize this computer'. Then, select 'Store>Authorize this computer'. Then restore your ipod and resync all your tracks. Once you are done, they should be authorized and you should be able to play them on your ipod.
    i

  • IPod Click Wheel games compatible with ipod nano 5th Generation

    I've found the iPod Click Wheel Games by clicking the triangle that appears next to the "App Store" tab and clicking the third option, "iPod Click Wheel Games." But when I look at the details of any of the games it says they are compatible with:
    "This game is compatible with iPod nano (3rd and 4th generation), iPod classic, and iPod (5th generation) only. It cannot be played on your computer, nor is it compatible with other iPod models or iPhone."
    Does this mean that I cannot use them on my iPod nano 5th generation? or is the iPod nano being referred to as "iPod (5th generation)"
    I guess it just seems silly that a game is only compatible with older versions or that the newest iPod nano can NOT operate older games.
    Can anyone explain this? or has anyone tried to download one of these iPod Click Wheel Games and found that it actually Does work for an iPod nano 5th generation?

    Can anyone explain this?
    I can't but Apple should be able too - U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • Can I replace my ipod nano 2nd generation with ipod nano 3rd generation.?

    I bought an iPod Nano 2nd generation last year in June and the warranty lasts until June of this year 2008. I want to know if there is any way to upgrade to an iPod Nano 3rd Generation without paying for a whole new iPod. If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano. Is there any way to get the 3rd Generation iPod Nano?
    [x|http://www.parikesit.com]

    If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano.
    If they still have iPods in stock of the older generation, you will get one of these; the color may vary, but other specifications should be the same. If not, you will most likely get a current model.
    You may want to find someone willing to purchase that iPod, and then put the money toward a current one.
    (32512)

  • Using Apple Earphones with Mic and Remote with Ipod Nano (3rd generation)

    Hi, I'm just wondering if there is any way i can make the Ipod Nano(3rd generation) compatible with the Apple Earphones with Mic and Remote. I know on the box it says the earphones are only compatible with a few ipods, like the 4th generation ipod nano. But Is there any program i can download or use to allow the ipod to recognize the earphone remote and mic?
    Thanks a lot.

    I'm quite convinced the answer is no for that Apple mic.
    I do believe recording is possible on the Nano 3G with the right attachment. But I don't think the sound comes through the headphone jack the way they do on the nano 4G and iPhone 3G/touch.
    This review http://www.macworld.com/article/60004/2007/09/3gipodnano.html says it's possible, but when I look at "Belkin, Griffin Technology, and XtremeMac" I don't find much... doesn't sound like they worked very well ... the iKaraoke is compatible

  • Can a docking speaker be used with IPod nano 7th generation

    Can a docking speaker be used with IPod nano 7th generation

    It should work if you can plug in the iPod

  • How do i share music between 2 users on one computer with ipod nano 7th generation

    How do I share music on itunes between 2 users on 1 computer and get the music from the computer onto my ipod nano 7th generation?

    Hi kstrenge,
    Welcome to the Apple Support Communities!
    I understand you want to share iTunes music on the same Windows XP computer between two different user accounts. To accomplish this please read over and follow the steps in the attached article.
    iTunes: How to share music between different user accounts on a single computer
    http://support.apple.com/kb/HT1203
    Once the music is shared and you are ready to sync your music from the computer to your iPod nano, please follow the steps in this article.
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    Have a great day,
    Joe

  • Just nike+ sensor with Ipod touch 2ndG?

    Hi all,
    I bought an Ipod Touch 2nd Generation few days ago.
    I wanna buy nike+. I found on apple Store 2 differ kind of nike+.
    The first one is the complete package with nike+ sensor and the receiver at 29,00€.
    the second one has jsut the sensor at 19,00€.
    I'm wondering for my Ipod touch 2g Do I need buy the second one or I have to buy anyway the complete package?
    Thanks in advanvce
    Cristiano

    Just the sensor, the 19 euro thing because the ipod touch 2nd gen has receiver built in

  • I need to sync my iPod Nano 3rd Generation with my new iMac, but my old pc no longer works so I can't follow the instructions on the apple site.  Is there any other way?

    Following the instructions on the Apple website on how to transfer music to a new computer using your iPod, it basically says that you have to hook up your iPod to your old computer.  Seeing as my old computer (a PC running Vista) died a horrible death and no longer works - including the hard drive being corrupted, I cannot do this.  Is there a way to sync my iPod Nanop 3rd generation to my brand new iMac without losing all my music?

    https://discussions.apple.com/thread/1839578

  • Need help please with ipod touch 4th generation

    I updated my daughters ipod touch 4th generation and now her apps are not working and they won't open up..she taps them and then they close right back..only thing she can use is the apps that were on there when she first got her ipod....does anybody have any idea what we can do to fix this?

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod
    iOS: How to back up your data and set up as a new device

  • Will yamaha MCR 040 work with Ipod nano sixth generation?

    I am interested in buying a Yamaha micro system such as the MCR 040. There specs are not very explicit and I want to be sure that it will charge and control my sixth generation Ipod nano.
    Has anyone tried it?

    According to the product's specifications page it is stated as being compatible with the 6G Nano. This page also says so.
    http://www.audiocubes.com/product_info.php?products_id=2902
    B-rock

  • Syncing issues with iPod nano 6th generation

    I just had my dell laptop re-imaged. I have Window 7 as the operating system. My iPod 6th generation nano shows up in iTunes but music and audiobooks will no longer sync. I am able to get them to sync when hooked to other computers. Any advice?

    Hello bell57
    Try restoring your iPod nano with iTunes and then setup the sync again to see if it starts to sync normally again.
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    Regards,
    -Norm G.

Maybe you are looking for

  • Average value of a material

    Hi All, I am writing a query where I have to calculate the average price of each material. Example, Material M1 can have many vendors, say,V1 and V2 I have to calculate for M1 = (Price * Qnty)for V1 + (Price* Qnty)for V2...../Total Quantity for (V1V2

  • SXPG_CALL_SYSTEM performance question

    Hi all, I'm using FM <b>SXPG_CALL_SYSTEM</b> in order to execute a server command which grants permissions to a file (just executes <u>CHMOD 777</u>). (also tried with <b>SXPG_COMMAND_EXECUTE</b>) My problem is regarding performance in this FM (progr

  • Facing issue with work center

    I am working on a real estate implementation.Require one help on below issue. Requirement is like one work center say excavation , Work is 5000 m3 Capcity of 1 labor is 15 m3/day Duration is 5 day In this situation we need system should calculate num

  • How to post Idocs FROM BW to R/3?

    Hi, what I need to do is: 1. read a cube. 2. create an Idoc from the record I read. 3. post the idoc back to R/3. Do you know how can I send the Idoc directly to R/3 FROM BW? Thanks, Itay

  • TS3694 error code 40

    i keep getting an error code 40 on my ipod i cant restore it i have tried on two different computers what do i do