HT2305 how can I correct my date and time on my 3G?

How can I correct my date and time on my 3G? Thanks in advance!

Just trying to go along the free route. I found Garage Buy   This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

Similar Messages

  • How can I print the date and time in a photo from iPhoto

    How can I print the date and time in a photo from iPhoto

    You want to print them on their own? Can't be done. WIth the photo? Install this
    http://www.iborderfx.com/iborderfx/

  • How can I copy the date and time in Mail header?

    How can I copy the date and time in Mail header?
    I can copy everything else in the header for pasting in another application. 
    But not the date and time which is absolutely vital.
    It was ok in 10.6 

    I suppose you could copy it from the Raw Source. View>Message>Raw Source

  • How can I get the date and time and display it on the report main page?

    Gurus,
    How can I get the date and time and display it on the report main page?
    Thanks!

    Hello,
    You can create a Formula Colum returning a date :
    function CF_1Formula return Date is
    begin
    RETURN(SYSDATE);
    end;
    Put a Field in the Layout having this formula column as source .
    Regards

  • How can I preserve the date and time of photos when moving them from iPhone to iPhoto and then to other folders on my computer?

    In the past I’ve had no problem moving photos from my iPhone 4 into various folders on my computer while retaining their original date and time. I would import into iPhoto, then drag the photos from iPhoto into other folders via the Finder or Adobe Bridge (which is my principal image organizer). The original date and time of the photo would always travel with the jpeg into iPhoto and then into other folders. However, sometime during a recent session transferring photos in this way, the dates of the photos started to change at the point when I copied them out of iPhoto. Within iPhoto itself, the various original dates of the photos are retained. But in Finder and Bridge, copies of those same photos all carry the same (worthless) date: the date and time that they were imported from my iPhone. I can’t figure out what would have changed on my Mac to make it start re-dating my photos. I was happily dragging and dropping photos, and suddently I started to lose the original dates. Did I inadvertently change some settings? (I am running OS 10.6.8 and using iPhoto 8.)

    (I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
    Why are you using iPhoto at all? use image capture or drag and drop the photos
    The problem is that the files I am copying are getting stripped of the EXIF metadata
    eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen  For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
    Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
    Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
    LN

  • How can i see the date and time of iPhone pictures, How can i see the date and time of iPhone pictures

    I would Like to know where i can see the date AND time on a picture i take With My iPhone? AND if not on the phone automaticly,.. Why not?... If even the cheapest phones provide this BASIC info.

    You can get this info if you have iPhoto for your phone (costs $5) - you can also try out the app I made (free) https://itunes.apple.com/us/app/photo-date/id605218393?ls=1&mt=8 Would love to know what you think!

  • How can I put current date and time in Photo Info (Print module)?

    I often use the Photo Info option in the Print Module to caption my proofs with File Number plus the date and time the print is made.  This allows me to match up the print to the History state for the image, so I know which print version I'm looking at.  I've always wanted to get Lightroom to automatically enter the date and time the print is made.  It obviously knows this info, since it stamps the History state with date and time.  Currently I have to modify my caption manually with Custom text each time I make a print.  This is a major PITA.  Has anyone figured out how to get Lightroom to do this?

    There is a Date/Time title in the titles browser, does just what it says...

  • How can I copy the date and time of a received email in Mountain Lion?

    I recently installed the new Mountain Lion, however I am having a serious issue with the mail application. I use the mail application to download all of my emails and then I copy each one in to a Filemaker Database. I used to be able to copy the headers (from, to, subject, date, time) but now with the new mail in Mountain Lion it will not let me copy the date and time of the email. This is the most important part for me as I need to be able to track when the email was received once I have pasted it in to the Filemaker program. Anyone know if there us an option so that the date and time can be copied from the email?

    I suppose you could copy it from the Raw Source. View>Message>Raw Source

  • How can I set my date and time to ebay network time server?

    In the system preferences I would like to set the date and time to ebay UK time?
    I thought a quick google would be bring up the server and I can't find it.
    At the bottom of every ebay page there is a link to official ebay time
    But its not a live feed of time to get it to the second.
    I want it to be accurate so that I can use applescript to snipe bargins.
    Many Thanks
    Matt

    Just trying to go along the free route. I found Garage Buy   This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
    Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

  • How can i have the date and time show up on my canon vixia hf m50

    Cannot get the date and time to show up onscreen in ANY videos on my new vixia HF M50. Can somebody help me on this?

    Hello Jerrysulew, 
    You can show the date and time using the Captions option.  The process is described below.
    Add a new level of enjoyment to your scenes by decorating them. You can add animated graphics, stamps and even your own freehand drawings. The supplied stylus pen will be especially useful for decorating scenes.
    You can decorate scenes as they are being recorded.
    IMPORTANT
    The screens and settings that appear may differ depending on the model you are using.
    NOTE
    You can open the decoration screen when the LCD panel is stowed with the LCD screen facing away from the camcorder. In such case, make sure [Autostart Decoration] is set to [On].
    Decorating Scenes while Recording
    1. Touch [ 
    2. Touch [Decoration].
    3. The decoration mode screen appears.
    On the decoration screen, there is a canvas where you can draw freely, and a toolbar with tools lined up for creating your drawings.
    Select the tool you want to use from the toolbar, and make drawings on the canvas.
    Icon
    Tool name
    Function
    Pens and Stamps
    Select the type of pen or stamp and its color. You can also save a canvas or load a previously saved canvas.
    Animated Stamps
    Select animated stamps to add to your decoration.
    Captions
    Add the date, date and time, story title* or story theme* as a caption that will be included in the recording.
    Image Mix**
    Choose one of 27 different frames to add onto the canvas. Image mix can be used in combination with the pens, stamps and animated stamps.
    Freeze screen**
    In recording mode: pause the live video. Touch [ 
     again to restore the live video. You can add decorations to and record the frozen image.
    In playback mode: pause the playback. Touch [ 
     ] to resume playing back the scene.
    Minimize toolbar
    Minimize the toolbar to the top of the screen to view almost all of the canvas. Touch [ 
     ] to restore the toolbar.
    * Not available in 
     mode.
    **Not available in 
     mode and for MP4 movies.
    4. Use a tool from the toolbar as explained in the following procedures.
    5. PressYou can add decorations even while recording a scene.
    6. Touch [ 
     ] to exit the decoration screen.
    NOTE
    For AVCHD movies, decorations will appear in the thumbnails of scenes in the [ AVCHD Movies] index screen and gallery. For MP4 movies, decorations will not appear in thumbnails.
    To use [Pens and Stamps]
    1. Touch [ 
    The [Pens and Stamps] screen will appear.
    2. Select the desired pen or stamp from [Tools].
    Select Colors.
    Touch [ 
    Select white or black from [Colors].
    Alternatively, you can touch [ 
     ] and select a color from the displayed colors.
    3. Draw freely on the canvas.
    Touch [ 
     ] > [Clear] > [Yes] to clear the canvas and start again.
    NOTE
    The canvas with decorations can be deleted, saved, and loaded.
    You can save the decorated canvas right after a decorating action.
    If the memory that contains the canvas is initialized, the canvas will be deleted.
    To use [Animated Stamps]
    1. Touch [ 
    2. Touch one of the control buttons.
    3. Touch anywhere on the canvas to place the selected animated stamp. You can also drag some animated stamps to a different location.
    NOTE
    When the [Animated Stamps] tool is used, the date/time will not be displayed or recorded.
    To use [Captions]
    1. Touch [ 
    2. Touch [Date] or [Time].
    When recording a scene using Story Creator, you can also select [Title]
    (the story&&&&&&&&&s title) or [Story Scene] (the story scene category).
    3. Select the desired text settings and touch [ 
    Touch [ 
     ] (white text on dark background), [ 
     ] (white text) or [ 
     ] (black text).
    Touch the caption and drag it to the desired location.
    To use image mix
    1. Touch [ 
     ] to open the [Select Image] screen.
    2. Touch [ON].
    3. Touch [+] or [-] to select a different image mix frame.
    You can touch one of the memory icons at the bottom of the screen to read image mix frames saved on a different memory (When recording on or playing back scenes from a memory card).
    Touch [ 
     ] to mix the selected frame with the live video.
    NOTE
    When [Rec Media for Movies] is set to [ 
     ] (the built-in memory), you will not be able to select image mix frames saved on a memory card (For camcorders that have internal memory only).
    For AVCHD movies, image mix cannot be selected during playback or while converting a scene to standard definition (For camcorders that have internal memory only). Select the image mix during playback pause or before starting the conversion.
    To use freeze screen
    1. Touch [ 
    The control button will change to [ 
     ] and the picture will be frozen.
    Decorate the screen using the other tools in the palette.
    2. Press the
    The decorations created will be recorded with recording scenes that are on pause.
    Press the
    Touch [ 
     ]. The screen will return to normal.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How can I display the date and time from the playhead info as a subtitle ?

    Is there any way it is possible to display the video capture data and time during playback. I have seen some discussion on creating subtitles to do this, it would be nice if one could simply add a Title template with display fields for playhead information so that it automatically gets created during rendering.
    In case you are wondering why on earth anyone would want this, I would like to use this for display on multisport racing videos.
    Thanks

    There is a Date/Time title in the titles browser, does just what it says...

  • HT2473 How can I get the date and time back on the menu bar?

    Several items disappeared from my menu bar for no  reason known to me.  I miss the date and time and want it back. Please .  I have gone to System Preferences and clicked "date and Time" but it will not allow me to check anything on the page even though there is a box "Show date and time in Menu bar".
    What should be my next move?

    One more thing might help us
    In the Finder > Date & Time Preferences > Take a Full ScreenShot of the entire display showing the "absence" of the check box (or whatever) to Show in Menu Bar
    ⌘ Command + ⇧ Shift > Press ' 3 ' > release all three
    Use the camera tool > locate the screenshot in the Desktop (not sure whether it will say "Picture 1.png" or have a TimeDateStamp as a title.
    ÇÇÇ

  • How can I show the date and time on the pictures in iMovie

    I am trying to make a slide show.  The date and time the pictures were taken are the important information that I would like to show in the slide show.  However, I cannot find the way to do that in iMovie. 

    I am trying to make a slide show.  The date and time the pictures were taken are the important information that I would like to show in the slide show.  However, I cannot find the way to do that in iMovie. 

  • How can I have both date and time for a Date type variable?

    If I have a Date type variable: Date today=new Date(), Is it possible to also give the current time to "today" but still keep the type as Date?
    I mean , for exmaple I want to store this "today" to database as Date type, and the value in database is "2007-05-05 13:30:13". I do not want to use SimpleDateFormat to do that, because I want to use Date type not String. Is that possible? how to implement this?

    I'd say he means you should use Timestamp to store
    the time value, because that's what it's there for.
    Because java.sql.Date is defined not to store a
    time value.Correct. The OP should read the Javadoc for java.sql.Timestamp.

  • How can I obtain System date and time?

    Good morning to everyone !,
    Could anybody help me?
    I need to know how to get the current System time... ??
    I need the source code to get it as a Timestamp. I think this type belongs to the class java.sql.Timestamp
    Which is the easiest way to do this?
    I need to get it, to insert it in a database datetime field afterwards.
    Thanks in advance for your time.

    Hello again, thanks for all the kind replies...
    I think I will go for this Option:
    Timestamp time = new Timestamp(System.currentTimeMillis());Seems very coherent to me. Do you know If I can insert it inside a datetime field of a DB Table?
    Thank you guys, you always exceed my expectations
    Sincerely, Jose

Maybe you are looking for

  • Flash app that allows users to create mini animations

    Hi, I am fairly new to flash, and was wondering if the community could point me in the right direction for my current project. I am looking to build an app that allows end users to draw and save mini animations (simple predetermined shapes that move

  • Basic working/Master Page questions

    Beginner - creating 80 pg catalog in ID - I'm a little confused with using  ID master pages and don't have time to go through a lot of tutorials at the moment. I created a new doc with 4 master pages (all spreads) to use at will throughout, intending

  • Dynamic structure for different tables

    Hi All, My requirement is, a table has to be given in the selection-screen and i have to download the data of that particular table. My doubt is, here we are passing the table names dynamically, so how can we assign the structure to the different tab

  • Exit and Rewind not working in 5.5

    Hello, I have an assessment built in v5.5. When the assessment is in the LMS and is exited, it does not rewind. This problem has happened before when I upgraded from 4.0 to 5.0 and the resolution was to replace the default.htm file (located in C:\Pro

  • Can a server handle threads?

    I have a server that a) recieves data b) updates a database c) sends data to clients I tried putting the database update into a separate thread : Runnable task = new Runnable() { public void run() { //i have a print statement here //which is not reac